Gen Sasaki

Last Updated :2021/04/06

Affiliations, Positions
Graduate School of Advanced Science and Engineering, Professor
Web Site
E-mail
genhiroshima-u.ac.jp
Other Contact Details
"1-4-1, KAGAMIYAMA, HIGASHI-HIROSHIMA", Japan
TEL : (+81)824-24-7545 FAX : (+81)824-22-7193
Self-introduction
Proressor, Hiroshima University, graduate School of Engineering, Research fields; Mechanical Materials, Materials Science, Composites, Electron microscopy

Basic Information

Major Professional Backgrounds

  • 1995/04/01, 2007/03/31, Hiroshima University

Academic Degrees

  • Doctor of Engineering, TOHOKU UNIVERSITY

Research Fields

  • Engineering;Material engineering;Material processing / Microstructural control engineering

Research Keywords

  • Squeeze Casting
  • Microstructure
  • Hot-Pressing
  • Transmission Electron Microscopy
  • Aluminium alloy
  • Anodic Bonding
  • Composite

Affiliated Academic Societies

  • The Japan Society of Mechanical Engineering
  • The Japan Society of Light Metals
  • The Japan Society of Microscopy
  • Japan Foundry Engineering Scociety
  • Japan Society of Powder and Powder Metallurgy

Educational Activity

Course in Charge

  1. 2021, Liberal Arts Education Program1, 4Term, Introduction to Mechanical Engineering
  2. 2021, Undergraduate Education, 1Term, An Introduction to Engineering Materials
  3. 2021, Undergraduate Education, 4Term, Mechanical Materials II
  4. 2021, Undergraduate Education, 3Term, Plastic Working and Powder Metallurgy II
  5. 2021, Undergraduate Education, 3Term, Applied Materials Physics
  6. 2021, Undergraduate Education, Second Semester, Mechanical Engineering Seminar
  7. 2021, Graduate Education (Doctoral Program) , Year, Mechanical Science Research V
  8. 2021, Graduate Education (Master's Program) , First Semester, Mechanical Science Research IIA
  9. 2021, Graduate Education (Master's Program) , First Semester, Mechanical Science Research IIB
  10. 2021, Graduate Education (Master's Program) , Second Semester, Mechanical Science Research IIB
  11. 2021, Graduate Education (Master's Program) , First Semester, Mechanical Science Seminar IIA
  12. 2021, Graduate Education (Master's Program) , First Semester, Mechanical Science Seminar IIB
  13. 2021, Graduate Education (Master's Program) , Second Semester, Mechanical Science Seminar IIB
  14. 2021, Graduate Education (Master's Program) , 4Term, Special Exercises on Mechanical Engineering B
  15. 2021, Graduate Education (Master's Program) , 1Term, Special Exercises on Mechanical Engineering A
  16. 2021, Graduate Education (Master's Program) , 2Term, Special Exercises on Mechanical Engineering A
  17. 2021, Graduate Education (Master's Program) , 3Term, Special Exercises on Mechanical Engineering B
  18. 2021, Graduate Education (Master's Program) , Academic Year, Special Study on Mechanical Engineering
  19. 2021, Graduate Education (Master's Program) , 3Term, Applied Materials Physics
  20. 2021, Graduate Education (Master's Program) , 3Term, Advanced in Composite Science and Engineering
  21. 2021, Graduate Education (Doctoral Program) , Academic Year, Special Study on Mechanical Engineering

Research Activities

Academic Papers

  1. Thermoelectric properties of beta-FeSi2 with Si dispersoids formed by decomposition of alpha-Fe2Si5 based alloys, JOURNAL OF ALLOYS AND COMPOUNDS, 391(1-2), 115-122, 20050405
  2. Impact and hot corrosion properties of levitation-melted NiAl polycrystals with different purity, MATERIALS TRANSACTIONS, 48(2), 195-204, 200702
  3. Surface treatment of Al18B4O33 whisker and development of Al18B4O33/ZK60 magnesium alloy matrix composite, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 187, 429-432, 20070612
  4. Influence of preform preparation condition on infiltration of molten aluminum, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 187, 530-532, 20070612
  5. Effects of Ca addition on solidification structure of Cu-Sn-Zn bronze castings, MATERIALS TRANSACTIONS, 48(4), 799-806, 200704
  6. Preparation of Ti matrix composites of Ti-B-C-N systems by spark sintering and their friction and wear characteristics, MATERIALS TRANSACTIONS, 48(5), 1042-1049, 200705
  7. Electrical and thermal characteristics of Pb-free Sn-Zn alloys for an AC-low voltage fuse element, MATERIALS TRANSACTIONS, 48(5), 1105-1112, 200705
  8. Interfacial reaction in AZ91D magnesium alloy matrix composite reinforced with aluminum borate whisker, MATERIALS TRANSACTIONS, 48(7), 1948-1954, 200707
  9. Low-pressure infiltration behavior of molten metal to porous FeCrSi preform, MATERIALS TRANSACTIONS, 49(2), 390-392, 200802
  10. Effects of aging treatment on the bending strength in AZ91D/Al18B4O33w composite, MATERIALS TRANSACTIONS, 49(4), 850-853, 200804
  11. Melting and solidification of TiNi alloys by cold crucible levitation method and evaluation of their characteristics, INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 21(1-4), 156-161, 200808
  12. Mechanical and Thermal Properties of Vapor-Grown Carbon Fiber Reinforced Aluminum Matrix Composites by Plasma Sintering, MATERIALS TRANSACTIONS, 51(3), 510-515, 201003
  13. Alloy Design of Ti Alloys Using Ubiquitous Alloying Elements and Characteristics of Their Levitation-Melted Alloys, MATERIALS TRANSACTIONS, 51(4), 740-748, 201004
  14. Long Time Stability of Pb-Free Sn-9Zn Elements for AC-Low Voltage Fuse Performance, MATERIALS TRANSACTIONS, 52(4), 753-758, 201104
  15. Preparation of Unidirectional Carbon Fiber Preform for Aluminium Matrix Composites, MATERIALS TRANSACTIONS, 52(5), 939-942, 201105
  16. Fabrication and characterization of unidirectional CF/Al composites, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 18(3), 167-171, 201109
  17. Property-Control of TiNi System Intermetallics and Their Characteristics, MATERIALS TRANSACTIONS, 52(12), 2189-2196, 201112
  18. Development of Manufacturing Method for Porous SiO2 Using Decarburization Process, MATERIALS TRANSACTIONS, 53(9), 1706-1709, 201209
  19. Property-Control of Ti Compacts in Spark Sintering Process, MATERIALS TRANSACTIONS, 54(2), 130-136, 2013
  20. Control of Electrical and Thermal Properties on Sn-50Zn Alloy by 8 vol%Al2O3 Addition for Pb-Free AC-Low Voltage Fuse Elements, MATERIALS TRANSACTIONS, 54(2), 231-237, 2013
  21. Development of Intermetallic Compounds Reinforced Al Alloy Composites Using Reaction of Porous Nickel and Aluminum, MATERIALS TRANSACTIONS, 54(4), 595-598, 2013
  22. Deformation and crack of chemically-vapor deposited(CVD)SiC studied by high resolution electron microscopy, Advanced Ceramic Materials, 3, 4, 19880401
  23. Microstructure of B4C/TiB2 composite fabricated by resction sinteting of B4C and TiC., J. Ceram. Soc. Jpn, 103(4), 321-325, 19940401
  24. Preparation and properties of piezoelectric lead zirconate titanate thin films for microsensors and, BOUNDARY, 11(9), 24-27, 19950401
  25. Reactivity of aluminum borate whisker with aluminum alloys, Mat. Sci. Eng., 59-68, 19970401
  26. Interfacial Reaction and Its Effect on Strength of Al18B4033/Al Composites, Mat. Sci. Tech., 15, 1044-1048, 19990401
  27. Interfacial microstructure and fracture characterization of Al18B4033/Al alloy composites, 5(4), 276-279, 19990401
  28. Effect of lamination structures on impact properties Al18B4033w/Al and aluminum laminate composites, Light Metals Review, 6, 32-37, 19990401
  29. Preparation and Characterization of Aluminum Broate Whisker Reinforced Magnesium Alloy Composites by Semi-solid Process, Adv. Composite Mater., 8(3), 259-268, 19990401
  30. Fabrication and Microstructure of Compo-casting Al18B4O33/Magnesium Alloy, ICCM-13, 1129, 20010601
  31. Effect of Whisker Coating Treatment on the Strength of Al18B4O33 /AC4CH Alloy Composites, ICCM-13, 1053, 20010601
  32. Infiltration Process of Molten Aluminum by Spreading wetting to Aluminum Borate Whisker Preform, ICCM-13, 1213, 20010601
  33. Fabrication and Mechanical Properties of Sintered SiC Fiber Reinforced/Mullite-SiO2 Glass Compsites, ICCM-13, 1194, 20010601
  34. Mechanical properties and microstructure of squeeze casting Al18B4O33w/ magnesium alloy composites, 637-640, 20011101
  35. ★, Ultrasonic Insert Casting of Aluminum Alloy, Scripta mater., 43, 155-159, 20000401
  36. Processing and Microstructure of Magnesium Alloy Matrix Composites, 1, 323-328, 20000801
  37. Effect of Whisker Surface Treatment on the strength of Al18B4O33/Al Alloy Composites, Proc. of 9th U.S.-Japan Conf. on Composite Materials, 209-216, 20000701
  38. ★, Mechanical Properties and Microstructure of Magnesium Alloys Composites Fabricated by Casting, Mat. Sci. Forum, 350-351, 215-220, 20000401
  39. Fabrication and Microstructure Analysis of Al18B4O33 Ceramics Reinforced Magnesium Alloy Composites, Magnesium Alloy and their Applicationsユ ed by K. U. Kainer, 257-262, 20000901
  40. Fabrication and Mechanical Properties of the SiC Fiber Reinforced Oxide Matrix Composites, 121-125, 20001101
  41. Preparation and characterization of TiC film by electrical discharge coating process, 141-145, 20000401
  42. Preparation of spinel coated Al18B4O33 whisker reinforced aluminum alloy composites, The forth Japan-China Joint Conf. On Composites, 88-89, 20001201
  43. Fabrication and microstructure of magnesium alloy matrix composites in semi-solid stir technique, The forth Japan-China Joint Conf. On Composites, 175-178, 20001201
  44. Metal pipe joining with aluminum alloy by ultrasonic insert casting, Materials and Manufacturing Processes, 15(6), 867-881, 20000601
  45. Interfacial Reaction and Its Effect on Strength of Al18B4O33/Al Composites, Mat. Sci. Tech., 15, 1044-1048, 19990401
  46. Interfacial microstructure and fracture characterization of Al18B4O33/Al alloy composites, 5(4), 276-279, 19990401
  47. Effect of lamination structures on impact properties Al18B4O33w/Al and aluminum laminate composites, Light Metals Review, 6, 32-37, 19990401
  48. Electron microscopy analysis of squeeze casting Al18B4O33/AZ91D composites, ICCM-12, 533, 19990401
  49. Compatibility of Si-C-O Fiber and Si-C Fiber with Aluminum, ICCM-12, 214, 19990401
  50. Preparation of SiC Reinforced Alumina-YAG Eutectic Composites, ICCM-12, 511, 19990401
  51. Preparation and Characterization of Aluminum Borate Whisker Reinforced Magnesium Alloy Composites by Semi-solid Process, Adv. Composite Mater., 8(3), 259-268, 19990301
  52. Microstructure and its effects on bending strength of Al18B4O33 reinforced Mg, Al matrix composites fabricated by squeeze casting process, 131-136, 19990901
  53. Mechanical Properties and Microstructures of Magnesium Matrix Composites, 65-70, 19990101
  54. Preparation and Property Evaluation of SiC/Al Composites Wires, Proc. of 16th Inter. Jpn-Korea Seminar on Ceramics, 30(2), 252-256, 19990201
  55. Processing and Interfacial Reaction of Nb/MoSi2 Laminate Composites and Their Effects on Impact Properties, European conference on composite materials (ECCM-8), 263-270, 19980601
  56. Effect of Interfacial Reaction on Bending Strength of Al18B4O33 Whisker Reinforced Aluminum Composites, Meta. Mat. Trans.A, 29A(5), 1517-25, 19980501
  57. Interfacial Microstructures and Impact Properties for Nb/MoSi2 Laminate Composites, Composite Interface, 5(5), 405-419, 19980501
  58. Fracture Mechanism of Al18B4O33 Whisker Reinforced Aluminum Alloy Composites, Proc. ACCM-1, 541-1-4, 19980101
  59. Mechanical Properties of Aluminum-Borate Whisker Reinforced Magnesium Alloy Composites by Semi-Solid Process, Proc. ACCM-1, 533-1-4, 19980101
  60. Interfaces in Al18B4O33/Al and Mg Alloy Composites, Electron Microscopy 1998, 813-14, 19980901
  61. Relationship between interfacial reaction and mechanical properties of Al18B4O33 whisker reinforced Mg, Al alloy composites, 1-14, 19980101
  62. Metal Pipe Joining with Aluminum Alloy by Ultrasonic Cast-in Insert Process, Proc. 8th Japan-US Conf. on Composite Materials, 873-882, 19980901
  63. Preparation of alumina borate whisker reinforced semi-solid Mg alloy composites by squeeze casting, Proc. 8th Japan-US Conf. on Composite Materials, 579-588, 19980901
  64. Microstructure and strength of Al-sapphire interface by means of the surface activated bonding method, J.Mater.Res., 12(3), 852-856, 19970401
  65. Reactivity of aluminum borate whisker with aluminum alloys, Mat. Sci. Eng., A225, 59-68, 19970401
  66. Microstructure of Titanium Dioxide (rutile)/Pure Aluminum composite, Proc. ICCM-11, 3, 24-31, 19970701
  67. Reaction Squeeze cast processing and Intermetallic dispersed aluminum matrix composites, Proc. ICCM-11, 3, 182-190, 19970701
  68. Reaction Squeeze casting process, 1, 1111-1117, 19970701
  69. TiO2 composites by squeeze casting and hardness/microstructure change by heat treatment, 2, 872-882, 19970401
  70. Mechanism of the anodic bonding of PZT ceramics and silicon wafer, Mat. Chem. Phys., 51(2), 174-177, 19970401
  71. Interfacial Reaction and Interface Structure of Al18B4O33w/Pure Al Composites, 423-428, 19970101
  72. Sol-gel derived PZT force sensor for scanning force microscopy, Mat. Chem. Phys., MAC044/1, 25-29, 19960401
  73. Preparation and properties of piezoelectric lead zirconate titanate thin films for microsensors and microactuators by sol-gel processing, J. Ceram. Soc. Jpn, 104(3), 159-163, 19960401
  74. Interface Reaction and structure in silica-sol coated aluminum borate whisker reinforced aluminum-magnesium alloy matrix composite, Interface Science and Materials Interconnection= Proc. of 8th Japan Institute of Metals International Symposium (JIMIS-8), 261-264, 19960401
  75. Microstructure of metal-ceramic interfaces fabricated using the surface activated bonding method, Interface Science and Materials Interconnection= Proc. of 8th Japan Institute of Metals International Symposium (JIMIS-8), 193-196, 19960401
  76. Mechanism of the anodic bonding of PZT ceramics to silicon wafer, Proc. 1996 International Electron Devices and Materials Symposia (96IEDMS) Hsinchu, 77-80, 19961201
  77. Surface activated bonding (SAB) of metal-ceramic system at room temperature, Proc. of 1st Symp. on Microjoining and Assembly Technology in Electronics, 75-78, 19950401
  78. Characterization of microstructure of Cu-Sn and Al-Sn interfaces fabricated by SAB method, Proc. of 1st Symp. on Microjoining and Assembly Technology in Electronics, 83-88, 19950401
  79. Microstructure of B4C/TiB2 composite fabricated by reaction sintering of B4C and TiC., 4, 321-325, 19940401
  80. Sintering behaviors of Si3N4 matrix composite with nono-meter SiC particles, Trans. Mat. Res. Soc. B, 1517-1520, 19940401
  81. Microstructure of PZT thin film prepared by sol-gel processing, Trans. Mat. Res. Soc. B, 1237-1240, 19940401
  82. Sol-gel derived PZT force sensor for scanning force microscopy, Proc. of IUMRS-ICEM 94, 21-26, 19941201
  83. Mechanical properties and microstructures of machinable silicon carbide, J. Mater. Sci., 28, 1175-1181, 19930401
  84. Surface activated bonding and application on micro-bonding at room temperature., Proc. of ISHM, 314-321, 19930401
  85. ★, Mechanical properties and microstructure of Si3N4 matrix composite with nano-meter scale SiC particles, J. Ceram. Soc. Jpn, 100(4), 536-540, 19920401
  86. Interface structure of Si3N4 matrix composite with nano-meter scale SiC particles., Proc. of MRS Fall meeting, 287, 335-340, 19920401
  87. Ni3Al matrix composites reinforced with alumina particles and interface structure, Proc. Inter. Symp. on Intermetallic Compounds (JIMIS-6), 941-945, 19910401
  88. Mechanical properties of aluminum borate whisker reinforced aluminum alloys and interface structure, Proc. 8th Inter. Conf. on Composite Materials (ICCM/8), 19-D, 1-12, 19910401
  89. Ni3Al matrix composites reinforced with alumina particles/fiber, Proc. 8th Inter. Conf. on Composite Materials (ICCM/8), 23-E, 1-11, 19910401
  90. Interface characterization of whisker reinforced aluminum composites with HREM, 459-464, 19910401
  91. Observation of fracture path of SiC particle dispersed Si3N4 composites., Proc. 1st Inter. Conf. on Science of Engineering Ceamics, 291-296, 19910401
  92. Mechanical properties and nanostructure of machinable SiC, Proc. 1st Inter. Conf. on Science of Engineering Ceramics, 419-424, 19910401
  93. High resolution electron microscopy of tilt boundary in Ni3(Al0.6,Ti0.4) bicrystal, Acta metall, 38(8), 1417-21, 19900401
  94. High resolution observation of indentation cracks in chemical vapor deposition SiC and Si3N4, Proc. XIth Inter. Cong. on Electron Microscopy= Kyoto, 1(2), 1679-80, 19860401
  95. Deformation and fracture of SiC studied by high resolution transmission electron microscop, 5, 25-30, 19890401
  96. Development of strong Al2O3/SiC composites, 4, 129-34, 19890401
  97. ★, Deformation and crack of chemically-vapor deposited (CVD) SiC studied by high resolution electron microscopy, Advanced Ceramic Materials, 3(4), 378-81, 19880401
  98. Metal pipe joining with aluminum alloy by ultrasonic insert casting, Materials and Manufacturing Processes, 15(6), 867-881, 20010601
  99. Fabrication and Microstructure of Compo-casting Al18B4O33/Magnesium Alloy, ICCM-13, 1129, ISBN7-900075-46-1(2001), 20010401
  100. Fabrication and Mechanical Properties of Sintered SiC Fiber Reinforced Mullite-SiO2 Glass Copmposites, ICCM-13, 1129, ISBN 7-900075-46-1(2001), 20010401
  101. Fabrication and Mechanical Properties of Sintered SiC Fiber Reinforced Mullite-SiO2 Glass Copmposites, ICCM-13, 1129, ISBN 7-900075-46-1(2001), 20010401
  102. Mechanical Properties of Aluminum Borate Whisker Reinforced AZ91D Magnesium Alloy Composites by Semi-solid Process, 9th United States-Japan Conference on Composite Materials, 201-208, 20000701
  103. Effect of Wisker Surface Treatment on the Strength of Al18B4O33/Al Alloy Composites, 9th United States-Japan Conference on Composite Materials, 209-216, 20000701
  104. Mechanical properties and Microstructure of Magnesium Alloys Composites Fabricated by Casting, 350-351, 215-220, 20000701
  105. Ultrasonic Insert Casting of Aluminum Alloy, Scripta mater., 43, 155-159, 20000401
  106. Processing and Microstructure of Magnesium Alloy Matrix Composites, Proc. Secand Asian-Australasian Conference on Composite Materials (ACCM-2000), 18-20, 323-328, 20000801
  107. Fabrication and Microstructure Analysis of Ceramics Reinforced Magnesium Alloy Matrix Composites, Magnesium Alloys and Their Applications, 257-262, 20000401
  108. Preparation and Characterization of TiC Film by Electrical Discharge Coating Process, Proceedings of the 17th International Korea-Japan Seminar on Ceramics, 141-145, 20001101
  109. Preparation of spinel coated Al18B4O33 Whisker Reinforced Aluminum Alloy Composites, 88-89, 20001201
  110. Fabrication and Microstructure of Magnesium Alloy Matrix Composites in Semi-solid Stir Technique, 175-178, 20001201
  111. Fabrication and Mechanical Properties of SiC Fiber Peinforced Oxide Matrix Composites, Proc. 2nd Int. Conf. on Processing Materials for Properties (PMP2000), 121-126, 20000401
  112. Ultrasonic Insert Casting of Aluminum Alloy, Scripta mater., 43, 155-159, 20000401
  113. Fabrication and Microstructure Analysis of Al18B4O33 Ceramics Reinforced Magnesium Alloy Composites, EILELY-VCH Press, 257-262, 20000901
  114. Mechanical Properties and Microstructure of Magnesium Alloys Composites Fabricated by Casting, Mat. Sci. Forum, 350-351, 215-220, 20000401
  115. Compatibility of Si-C-O Fiber and Si-C Fiber with Aluminum, ICCM-12=Paris= France= CD-ROM= Metal Matrix Composites, 94-104, 19990401
  116. Preparation of SiC Reinforced Alumina-yag Eutectic Composites, ICCM-12(1999), Metal Matrix Composites/Properties and Relation=CD-ROM, 87-96, 19990401
  117. Electron Micrscopy Analysis of Squeeze Cast Al18B4O33w/AZ91D Composites, ICCM-12=CD-ROM= Metal Matrix Composites/Charachterization and Modeling, 65-71, 19990401
  118. Effect of lamination structures on impact properties of Al18B4O33w/Al and aluminum laminate composites, Light Metals Review, 6, 32-37, 19990701
  119. Preparation and Characterization of Aluminum Borate Whisker Reinforced Magnesium Alloy Composites by Semi-solid Process, Advanced Composites Mater, 8, 259-268, 19990401
  120. Microsteucture and Its Effects on Bending Strength of Al18B4O33 Reinforced Mg, Al Alloy Matrix Conposites Fabricated by Squeeze Casting Process, 131-136, 19990901
  121. Interfacial Reaction and Its Effect on Strength of Al18B4O33/Al Composites, Mater. Sci. Tech., A, 15, 1044-1048, 19990401
  122. Mechanical Properties and Microstructures of Magnesium Matrix Composites, 65-70, 19991101
  123. Preparation and Property Evaluation of SiC/Al Composite Wires, Proceeding of the 16th International Japan-Korea Seminar on Ceramics, 252-256, 19991101
  124. Interfacial Control of Nb/MoSi2 Laminate Composites and Its Effect on Impact Properties, Proceeding of the 16th International Japan-Korea Seminar on Ceramics, 257-266, 19991101
  125. Interfacial Microstructure and Fracture Characterization of Al18B4O33/Al Alloy Composites, Materials Science Research International, 5, 276-279, 19990401
  126. Effect of Interfacial Reaction on Bending Strength of Al18B4O33 Whisker Reinforced Aluminum Composites, Metallurgical Abstracts on Light Metals and Alloys, 32, 218-220, 19990401
  127. Processing and Interfacial Reaction of Nb/MoSi2 Laminate Composites andTheir Effects on, Impact Properties= Proc.of ECCM-8, 4, 263-270, 19980601
  128. Metal Pipe Joining with Aluminum Alloy by Ultrasonic Cast-in Insert Process, 8th US-Japan Conference on Composite Materials, 873-882, 19980901
  129. Preparation of Aluminum Borate Whisker Reinforced Semi-solid Magnesium Alloy Composites by Squeeze Casting, 8th US-Japan Conference on Composite Materials, 579-588, 19980901
  130. Mechanical Properties of Aluminum-Borate Whisker Reinforced Magnesium Alloy Composites by Semi-Solid Process, First Asian-Australasian Conference on Composite Materials (Proc. ACCM-1), II, 533-1-533-4, 19980101
  131. Fracture Mechanism of Al18B4O33 Whisker Reinforced Aluminum Alloy Composites, First Asian-Australasian Conference on Composite Materials (Proc. ACCM-1), II, 541-1-541-4, 19980101
  132. Interfaces in Al18B4O33/Al and Mg alloy Composites, Electron Microscopy 1998=Paper presented at ICEM14= Cancun= Mexico, II, 813, 19980801
  133. Effect of Interfacial Reaction on Bending Strength of Al18B4O33 Whisker-Reinforced Aluminum Composites, Metall. Mater. Trans. A, 29A, 1517-1523, 19980401
  134. HREM and EDS Analysis of Sintered SiC Fiber Reinforced MAS Glass Composites, J. Electron Microscopy, 51, S159-164, 20000401
  135. Fabrication of aluminum borate whisker reinforced AZ91D magnesium alloy composites by semi-solid process and their mechanical properties, Adv. Composite Mater., 10(2,3), 255-263, 20020401
  136. Effect of whisker surface treatment on the strength of Al18B4O33/Al alloy composites, Adv. Composite Mater., 10(4), 299-307, 20020401
  137. Interfacial microstructure of anodic-bonded Al/glass, J. Mat. Sci.= Mat. in Electronics, 13, 83-85, 20020401
  138. Influence of Abnormal Structure on the Reliability of Squeeze Castings, 1, 200-203, 20020401
  139. TEM study on anodic bonded Al/glass and Si/glass, 2, 41-46, 20020401
  140. Influence of microstructure of sintered SiC / SiO2-mullite oxide matrix composites on mechanical properties, 2, 276-281, 20020401
  141. Effect of fabrication condition on microstructure and mechanical properties of compo-casting Al18B4O33/ AZ91D magnesium alloy composites, 2, 343-346, 20020401
  142. Preparation and Mechanical Properties of Carbon Fiber Reinforced AZ91D Magnesium Alloy Composites Fabricated by Squeeze Casting Process, 2, 347-351, 20020401
  143. Relationship between Aging Behaviors and Interfacial Reaction of casting Al18B4O33 Whisker Reinforced Magnesium Alloy Composites, 2, 352-356, 20020401
  144. TEM study of the interface of anodic bonded Si/Glass, Scripta Mat., 47, 577-582, 20020401
  145. Stirring Simulation of Compo-casting Process and Fabrication of the Metal Matrix Composites, CJUJCC-5 Proceedings, 258-262, 20020401
  146. The Aging Behaviors of Al18B4O33 Whisker Reinforced Magnesium Alloy Composites, CJUJCC-5 Proceedings, 208-213, 20020401
  147. Characterization of heat insulating and lubricating ability of powder lubricants for clean and high quality die casting, J. Materials Processing Technology, 130-131, 289-293, 20020401
  148. Influence of abnormal structure on the reliability of squeeze castings, J. Materials Processing Technology, 130-131, 299-303, 20020401
  149. Modeling of Compocasting Process and Fabrication of AZ91D Magnesium Alloy Matrix Composites, J. Materials Processing Technology, 130-131, 151-155, 20020401
  150. Effects of Thermal Residual Stress on Mechanical Properties of SiC Fiber Reinforced SiO2-Mullite Composites, CD-ROM, 20020401
  151. Relationship between aging behaviors and interfacial reaction of Al18B4O33 whisker reinforced magnesium alloy composites, 2, 352-356, 20021001
  152. Aging behaviors of Al18B4O33 Whisker reinforced magnesium alloy composites, Proc. 5th Japan-China Joint Conf. on Composites (CJUJCC-5), 208-213, 20020801
  153. Visualized modeling of compo casting processing for magnesium alloy composites, Proc. 14th Int. Conf. on Composite Materials= ICCM-14, CD-ROM PAPERNO.1149 TOTAL 6, 20030701
  154. Stirring simulation of compo-casting process and fabrication of metal matrix composites, Proc. 5th Japan-China Joint Conf. on Composites (CJUJCC-5), 258-262, 20020801
  155. Mechanical Properties and Microstructure of Magnesium Alloy Composites Prepared by Compo-casting, Mat. Sci. Forum, 419-422, 20030401
  156. Material Mechanical Properties and Microstructure of Magnesium Alloy Matrix Composites Fabricated by Casting Process, Mat. Sci. Forum, 426-432, 2015-2020, 20030401
  157. Effects of thermal residual stress on mechanical properties of the SiC fiber reinforced SiO2- mullite composites, ICCM-14, paper 1511, 20030401
  158. Oxidation behavior of the SiC fiber reinforced SiO2- mullite composites, ICCM-14, paper 1512, 20030401
  159. Preparation of cast steels with high-toughness and -strength, Proc. of 1st Korean-Japan Conf. for Young Foundry Engineers, 145-148, 20030401
  160. Fabrication and Mechanical Properties of Carbon Fiber Reinforced Magnesium Alloy Composite by Squeeze Casting, 773-776, 20030401
  161. Evaluation of spatial distribution of particulate second phase in two phase materials, Joint Conf. extended abstract booklet of the 11th US-Japan Conf. on composite materials and the 7th Int. Conf. on textile composite, MMC2-1 - MMC2-4, 20040901
  162. Densification rate of mono-sized Cu-Al2O3 composite powder compact in spark sintering, Joint Conf. extended abstract booklet of the 11th US-Japan Conf. on composite materials and the 7th Int. Conf. on textile composite, MMC5-1 - MMC5-4, 20040901
  163. Spark sintering of electroless Ni plated W powders, 2, 173-178, 20041101
  164. Visualized modeling of stir casting and fabrication of aluminum alloy matrix composites using ultrasonic vibration, Joint Conf. extended abstract booklet of the 11th US-Japan Conf. on composite materials and the 7th Int. Conf. on textile composite, MMC6-1 - MMC6-4, 20040901
  165. Fabrication of the Aluminum Matrix Composite by Ultrasonic Infiltration Technique, Mat. Sci. Forum, 475-479, 921-924, 20050101
  166. Resistivity study eutectoid decomposition kinetics of a-Fe2Si5 alloy, Materials Trans. JIM, 46(3), 720-725, 20050301
  167. Mechanical Properties and Fatigue Crack Growth Behavior of Whisker Reinforced AC4CH Composites Containing Inorganic Binder, 797-800, 20031101
  168. Processing of Aluminum Alloy Matrix Composites and Its Application for Automobile Parts, 805-808, 20031101
  169. Influence of Fiber Surface Structure on Interfacial Reaction of Carbon Fiber Reinforced Aluminum Matrix Composites, 813-816, 20031101
  170. Influence of Inclusion Size and Its Distribution on the Mechanical Property and Their Reliabilities of Aluminum Alloy Squeeze Castings, Proc. of 8th Asian Foundry Congress, 266-275, 20031201
  171. Microstructure and Mechanical Property of MoSi2 Based Composites, Mat. Sci. Forum, 475-479, 707-710, 20040401
  172. Effect of Mn or Co on Kinetics of Eutectoid Decomposition in Sintered a-Fe2Si5 Alloys, Materials Transaction= JIM, 46(6), 1407-1412, 20050601
  173. Anodic Bonding and its Interfacial Reaction between Metals and Ionic Conductor, Proc. of 2nd JSME/ASME International Conference on Materials and Processing 2005, JSME05-203, MMC-02 (CD-ROM), 20050701
  174. Tensile Strength of Aluminum Borate Whisker / AZ91D Magnesium Alloy Composites Prepared by Comp-casting Process, Proc. of 2nd JSME/ASME International Conference on Materials and Processing 2005, JSME05-203, MMC-09 (CD-ROM), 20050701
  175. Influence of Inclusion Size and Its Distribution on the Mechanical Property and Their Reliabilities of Aluminum Alloy Squeeze Castings, Proceedings of the 5th ISIM, 20030401
  176. Fabrication and mechanical properties of carbon fiber reinforced magnesium alloy composite by squeeze casting, Proceedings of the 8th Japan International SAMPE Symposium, 773-776, 20031101
  177. Anodic bonding and its interfacial reaction between metals and ionic conductor, Proc. 2nd JSME/ASME Int. Conf. on Materials and Processing 2005, JSME05-203, (MMC-03)-1-5, 20050601
  178. Simulation of infiltration of molten alloy to porous preform by low pressure, Proc. 2nd JSME/ASME Int. Conf. on Materials and Processing 2005, JSME05-203, (MMC-06)-1-6, 20050601
  179. Tensile strength of aluminum borate whisker / AZ91D magnesium alloy composites prepared by comp-casting process, Proc. 2nd JSME/ASME Int. Conf. on Materials and Processing 2005, JSME05-203, (MMC-09)1-5, 20050601
  180. Effect of fiber surface structure on interfacial reaction between carbon fiber and aluminum, Proc. 2nd JSME/ASME Int. Conf. on Materials and Processing 2005, JSME05-203, (MMC-10)- 1-5, 20050601
  181. Effect of ultrasonic vibration on infiltration of nickel porous preform with molten aluminum alloys, Mat. Trans., 46(10), 2156-2158, 20051001
  182. Effect of fiber surface structure on interfacial reaction between carbon fiber and aluminum, JSME International Journal= Series A, 48(4), 205-209, 20050401
  183. Simulation of infiltration of molten alloy to porous preform using low pressure, JSME International Journal, 49(1A), 20-24, 20060101
  184. Spark sintering of electroless nickel or tin plated metal, carbide, oxide and sulfide powders, Pulse Electric Current Synthesis and Processing of Materials (Proc. of 6th Pacific Rim Int. Conference on Ceramic and Glass Technology), 194, 197-208, 20061001
  185. Spark sintering rate of pure copper powder compact, Pulse Electric Current Synthesis and Processing of Materials (Proc. of 6th Pacific Rim Int. Conference on Ceramic and Glass Technology), 194, 161-172, 20061001
  186. Analysis of manufacturing processes for metal fiber reinforced aluminum alloy composite fabricated by low-pressure casting, Materials Transactions, 47(4), 1227-1231, 20060401
  187. Temperature simulation of Pb-free Sn-9Zn elements for a low voltage fuse, Materials Transactions, 47(9), 2413-2420, 20060901
  188. Effect of Al18B4O33 whisker surface treatment on aging behavior of Al18B4O33 whisker/ZK60 magnesium alloy composites, Key Engineering Materials, 326-328, 1673-1676, 20061001
  189. Low pressure casting process of FeCrSi / A366.0 alloy composites and their characterization, Key Engineering Materials, 326-328, 1741-1744, 20061001
  190. Mechanical Properties of Fe Based Fiber / Aluminum Alloy Composites Fabricated by Low-Pressure Infiltration, Proc. of 16th Int. Conf. on Composite Materials, MOHA1-05GE_SASAKIG224835P, PP.1-4, 20070701
  191. Effect of Aging Behavior on Mechanical Properties of AZ91D / A118B4033 Whisker Composites Fabricated by Squeeze Casting, Proc. of 16th Int. Conf. on Composite Materials, FRJM1-07GE_MARUOK22437P, PP.1-5, 20070701
  192. Effect of Electrical Potential to Aluminum Coated Ionic Conductor Glass on Interfacial Phenomena, Proc. of 10th Japan Int. SAMPE Symp. & Exhibition, (MMC, CMC, C/C, HT APPL-2-2)1 - 6, 20071127
  193. Electrical Conductivity of VGCF / Aluminum Composites Fabricated by Electro Spark Sintering, Materials Science Forum, 561-565, 729-732, 20071101
  194. Nanostructured gamma-alumina formed during anodic bonding of Al / glass, Solid State Ionics, 178, 3-4(2), 179-185, 20070201
  195. Microstructure and Mechanical Property of MoSi2 Based Composites, Materials Science Forum, 475-479, 707-710, 20050101
  196. Modern Trends of Aluminum and Magnesium Alloy Matrix Composites in Japan, Proc. of 5th Joint Canada-Japan Workshop on Composites, 33-39, 20040901
  197. Infiltration Behavior of Molten Aluminum Alloy to Porous Preform by Low Pressure, Proc. of 10th Japan Int. SAMPE Symp. & Exhibition (JISSE-10, (MMC, CMC, C/C, HT APPL-2-3)1 - 6, 20071127
  198. Low pressure infiltration of molten aluminum alloy to metal fiber preform, Materials Science Forum, 539-543, 769-772, 20070301
  199. Aging behaviors in AZ91D/ Al18B4O33w composite fabricated by squeeze casting, Materials Transactions, 49(3), 637-642, 20080301
  200. Melting and Solidification of TiNi Alloys by Cold Crucible Levitation Method, and Evaluation of their Characteristics, Proc. of 10th Asian Foundry Congress, 357-362, 20080524
  201. Effect of Fiber Surface Structure on Interfacial Reaction for Vapor Grow Carbon Fiber Reinforced Aluminum Matrix Composite, Proc. of US-Japan Conf. on Composite Materials 2008, (HTC-6)-1 - 5, 20080606
  202. Electrical resistivity of carbon nanofiber/aluminum matrix composites, ICCHT2008-4th Int. Conf. on Cooling and Heating Technologies, 311-317, 20081028
  203. Investigation on infiltration of molten aluminum into a metal fiber preform, 16th Annual Int. Conf. on Composites/Nano Engineering, 20080801
  204. Infiltration analysis of molten metal to fiberous preform by low pressure casting and experimental evaluation, 3rd JSME/ASME Int. Conf. on Materials and Processing, MSEC_ICM & P 2008-72157 - 72162, 20080801
  205. Effect of aging on microstructure of aluminum borate whisker reinforced AZ91D magnesium alloy composite, 3rd JSME/ASME Int. Conf. on Materials and Processing, MSEC_ICM & P2008-72413 - 72416, 20080801
  206. Influence of fiber surface structure on interfacial structure between fiber and matrix in vapor grown carbon fiber reinforced aluminum matrix composites, Materials Transactions, 50(6), 1510-1518, 20090601
  207. Fabrication and electrical conductivity of vapor grown carbon fiber reinforced aluminum composites, Materials Transactions, 50(9), 2160-2164, 20090901
  208. Densification of aluminum matrix composites by low-pressure infiltration method, Proc.of 7th Japan-Korea Joint Symp. on Composite Materials, 199-200, 20090925
  209. Preparation of unidirectional carbon fiber perform for Cf/Al composites, Proc. of 12th Int. Conf. on Aluminum Alloys, 867-872, 20100901
  210. Fabrication and Characterization of Unidirectional Cf/Al Composites, Proc. of 8th Joint Canada-Japan Workshop on Composites, 173-180, 20100701
  211. Fabrication of carbon nano-fiber / aluminum composites by low-pressure infiltration method, Materials Science Forum, 654-656, 2692-2695, 20100901
  212. Low infiltration process of molten aluminum alloy to C / C perform with nickel coating, Proc. of 8th Joint Canada-Japan Workshop on Composites, 20100701
  213. Effect of microstructure on thermal properties for VGCF / aluminum Composites fabricated by spark sintering process, Proc. of 12th Int. Conf. on Aluminum alloys, 873-877, 20100701
  214. Evaluation of thermal conductivity of Cf/Al composites fabricated by low pressure infiltration methods, Proc. of 18th Int. Conf. on Composite Materials, T6-1-IF0532- 1-5, 20110801
  215. Tensile and trans-thickness tensile/inter-laminar shear failure behavior of nite-SiC/SiC composite, Proc. of 18th Int. Conf. on Composite Materials, W22-1-IF0421- 1-4, 20110801
  216. Fabrication process and microstructure of VGCFs/Al composites by spark sintering, Proc. of 18th Int. Conf. on Composite Materials, F12-3-AF0951- 1-5, 20110801
  217. Fabrication of intermetallic compound dispersed aluminum matrix composites by porous nickel, Proc. of 18th Int. Conf. on Composite Materials, P4-29-AF0539- 1-5, 20110801
  218. Microstructure and mechanical properties of Al2O3/A336 composite by low pressure infiltration, Proc. of 18th Int. Conf. on Composite Materials, P4-31-IF0554- 1-4, 20110801
  219. Fabrication of vapor grown carbon fiber reinforced aluminum composites by spark sintering, Materials Science Forum, 706-709, 699-703, 20120101
  220. Influence of interfacial reactant on the strength and fracture behavior of CF/Al composites, Proc. of 8th Korea-Japan Joint Symp. on Composite Materials, 83-84, 20111101
  221. Analysis of low pressure infiltration for molten aluminum to porous FeCrSi fiber, Proc. of 8th Korea-Japan Joint Symp. on Composite Materials, 87-88, 20111101
  222. Development of intermetallic compound dispersed aluminum matrix composites with a new process, Proc. of 8th Korea-Japan Joint Symp. on Composite Materials, 89-90, 20111101
  223. Property- and shape-control for titanium compacts in spark sintering process, Proc. of 2012 Powder Metallurgy World Congress, 8, 20130101
  224. Optimum production process of particulate intermetallic compound reinforced aluminum metal matrix composites, Proc. of 9th Int. Conf. on Fracture & Strength of Solids, total 7, 20130601
  225. Microstructure control of VGCF/aluminum composites by rolling, Proc. of 9th Int. Conf. on Fracture & Strength of Solids., total 4, 20130601
  226. Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process, Composites Science and Technology, 97, 1-5, 20140601
  227. Ultrasonic insert casting of aluminum alloy, SCRIPTA MATERIALIA, 43(2), 155-159, 20000703
  228. Metal pipe joining with aluminum alloy by ultrasonic insert casting, MATERIALS AND MANUFACTURING PROCESSES, 15(6), 867-881, 2000
  229. Effect of fabricating temperature and volume fraction of Nb sheet on impact properties of Nb/MoSi2-ZrO2 laminate composites, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 64(12), 1245-1251, 200012
  230. Effect of a whisker surface treatment on the strength of Al18B4O33 whisker reinforced AC4CH aluminum alloy composites, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 65(3), 199-206, 200103
  231. Interfacial microstructure of anodic-bonded Al/glass, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 13(2), 83-88, 200202
  232. TEM study of the interface of anodic-bonded Si/glass, SCRIPTA MATERIALIA, 47(9), 577-582, 20021101
  233. Fabrication of aluminum borate whisker reinforced AZ91D magnesium alloy composites by semi-solid process and their mechanical properties, ADVANCED COMPOSITE MATERIALS, 10(2-3), 255-263, 2001
  234. Effect of whisker surface treatment on the strength of Al18B4O33/Al alloy composites, ADVANCED COMPOSITE MATERIALS, 10(4), 299-307, 2001
  235. HREM and EDS analysis of sintered SiC fibre reinforced MAS glass composites, JOURNAL OF ELECTRON MICROSCOPY, 51, S159-S164, 2002
  236. Modeling of compocasting process and fabrication of AZ91D magnesium alloy matrix composites, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 130, 151-155, 20021220
  237. Characterization of heat insulating and lubricating ability of powder lubricants for clean and high quality die casting, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 130, 289-293, 20021220
  238. Influence of abnormal structure on the reliability of squeeze castings, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 130, 299-303, 20021220
  239. Material mechanical properties and microstructure of magnesium alloy matrix composites fabricated by casting process, THERMEC'2003, PTS 1-5, 426-4, 2015-2019, 2003
  240. Mechanical properties and microstructure of Al18B4O33/magnesium alloy composites prepared by compo-casting, MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 419-4, 777-781, 2003
  241. Influence of sputtering conditions on the microstructure of titanium thin films grown on a silicon substrate, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 67(12), 703-707, 200312
  242. Fabrication of the aluminum matrix composite by ultrasonic infiltration technique, PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 475-479, 921-924, 2005
  243. Microstructure and mechanical property of MoSi2 based composites, PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 475-479, 707-710, 2005
  244. Resistivity study of eutectoid decomposition kinetics of alpha-Fe2Si5 alloy, MATERIALS TRANSACTIONS, 46(3), 720-725, 200503
  245. Effect of Mn or Co on kinetics of eutectoid decomposition in sintered alpha-Fe2M5 alloys, MATERIALS TRANSACTIONS, 46(6), 1407-1412, 200506
  246. Conduction type evolution during eutectoid decomposition of Mn-added alpha-Fe2Si5 alloy, SCRIPTA MATERIALIA, 53(6), 707-711, 200509
  247. Effect of ultrasonic vibration on infiltration of nickel porous preform with molten aluminum alloys, MATERIALS TRANSACTIONS, 46(10), 2156-2158, 200510
  248. Effect of fiber surface structure on interfacial reaction between carbon fiber and aluminium, JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 48(4), 205-209, 200510
  249. Influence of fiber surface structure on interface reaction between carbon fiber and aluminum, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 69(11), 983-988, 200511
  250. Temperature simulation of Pb-free Sn-9Zn elements for a low voltage fuse, MATERIALS TRANSACTIONS, 47(9), 2413-2420, 200609
  251. Analysis of manufacturing processes for metal fiber reinforced aluminum alloy composite fabricated by low-pressure casting, MATERIALS TRANSACTIONS, 47(4), 1227-1231, 200604
  252. Measurement in permeability coefficient of molten aluminum alloy in a preform and simulation of infiltration under low pressure, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 70(11), 905-911, 200611
  253. Fabrication and oxidation behavior of sintered SiC fiber reinforced SiO2-mullite composite with BN interphase, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 71(2), 275-283, 200702
  254. Nanostructured gamma-alumina formed during anodic bonding of Al/glass, SOLID STATE IONICS, 178(3-4), 179-185, 200702
  255. Aging behaviors in AZ91D/Al18B4O33, composite fabricated by squeeze casting, MATERIALS TRANSACTIONS, 49(3), 637-642, 200803
  256. Substitution by Ubiquitously Alloying Elements for alpha plus beta Type Ti-6Al-4V and Characteristics of Their Levitation-Melted Alloys, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 72(12), 935-941, 200812
  257. Influence of Fiber Surface Structure on Interfacial Structure between Fiber and Matrix in Vapor Grown Carbon Fiber Reinforced Aluminum Matrix Composites, MATERIALS TRANSACTIONS, 50(6), 1510-1518, 200906
  258. Fabrication and Electrical Conductivity of Vapor Grown Carbon Fiber Reinforced Aluminum Composites, MATERIALS TRANSACTIONS, 50(9), 2160-2164, 200909
  259. Application of Theoretical Design to Selection of TiNi-X Alloys with Both High Strength and Oxidation Resistance, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 75(2), 110-114, 201102
  260. Nano-Voids Formation and Hydrogen Configuration in Low Frictional Cr-Mo Layers Electrodeposited with Organic Sulfonic Acid Catalyst, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 77(11), 527-536, 201311
  261. Control of Electrical and Thermal Properties by 8 vol% Al2O3 Distribution States in Zn-50Sn for AC-Low Voltage Fuses, MATERIALS TRANSACTIONS, 55(3), 577-585, 201403
  262. Microstructure Observation of Preform for High Performance VGCF/Aluminum Composites, MATERIALS TRANSACTIONS, 55(5), 827-830, 201405
  263. Manufacturing process of dispersed intermetallic compounds Al alloy composites by using porous nickel, JOURNAL OF COMPOSITE MATERIALS, 48(18), 2289-2295, 201408
  264. Influence of the specific surface area of a porous nickel to the intermetallic compound generated by reaction of a porous nickel and aluminum, METALS AND MATERIALS INTERNATIONAL, 20(4), 741-745, 201407
  265. Effect of SiO2 amount on microstructures and tensile properties of alumina short fiber-reinforced composites by low-pressure infiltration method, JOURNAL OF COMPOSITE MATERIALS, 48(27), 3435-3441, 201411
  266. Electrical Conductivity and Spatial Distribution of Particle Dispersed Composites, Composite Materials, 7772-7777, 2013
  267. Preparations and Evaluation of Electrical Conductivity for TiB2/ Al Composites by Spark Sintering Process,, 945-952, 2013
  268. Relationship between Microstructure and Electrical Conductivity of TiB2 Particle Dispersed Al Composites by Spark Sintering Process, 1487-1492, 201308
  269. Image processing characterization of microstructures of Al-Si casting alloy, Materials Science Forum, 783-786, 240-245, 201406
  270. Effect of dispersibility of TiB2 particels on electrical conductivity in TiB2/Al composites, Materials Science Forum, 783-786, 1573-1578, 201405
  271. Optimal production process of particulate intermetallic compound reinforced aluminum metal matrix composites, International Journal of Aerospace and Lightweight Structures, 3(4), 503-512, 201404
  272. Effect of aluminum carbide on thermal conductivity of the unidirectional CF/Al composites fabricated by low pressure infiltration process, Composites Science and Technology, 97(16), 1-5, 201406
  273. Influence of the specific surface area of porous nickel to the intermetallic compound generated by reaction of porous nickel and aluminum, Metals and Materials International, 20(4), 741-745, 201407
  274. Manufacturing process of dispersed intermetallic compounds Al alloy composite by using porous nickel, Journal of composite materials, 48(18), 2289-2295, 201402
  275. Effect of SiO2 amount on microstructures and tensile properties of alumina short fiber-reinforced composites by low-pressure infiltration method, Journal of composite materials, 48(27), 3435-3441, 201411
  276. Microstructure Control of CNF/Aluminum Composites and Effect on Electrical Conductivity, Proc. of JSME Int'l Conf. on Materials and Processing, Paper No. ICMP2014-4952, 201406
  277. Thermal Properties of titanium boride particle reinforced pure aluminum composites, Proc. of Canada-Japan Workshop on Composites, 201407
  278. Evaluation of Electrical and Thermal Properties of Titanium Boride Dispersed Aluminum Composites by Spark Plasma Sintering Process, Proc. of 2014 ASC 29 / US-Japan 16 / ASTM D30 Conference, paper No. 116, 201409
  279. Development and Mechanical Properties of High Temperature Lead Free Solder Composites, Abs of The 11th China-Japan Joint Conf. on Composite Materials (CJJCC-11), 201401
  280. Compositional Optimization of Al-Mn-X Alloys and, Their Tensile and Corrosion Properties, MATERIALS TRANSACTIONS, 56(10), 65-72, 201510
  281. Nickel Formation on Graphite Sheet Surface for Improving Wettability with Magnesium Alloy, MATERIALS TRANSACTIONS, 56(10), 83-87, 201510
  282. Effect of the Interfacial Thermal Resistance on the Effective Thermal Conductivity of Aluminum Matrix Composites, MATERIALS TRANSACTIONS, 57(5), 582-589, 201605
  283. Fabrication of Vapor-Grown Carbon Fiber-Reinforced Magnesium-Calcium Alloy Composites by Compo-Casting Process, MATERIALS TRANSACTIONS, 58(4), 673-678, 2017
  284. Manufacturing Process of Carbon-Alumina Short Fiber Hybrid Reinforced Aluminum Matrix Composites by Low Pressure Casting, MATERIALS TRANSACTIONS, 58(7), 1097-1099, 2017
  285. Effect of the Interfacial Thermal Resistance on the Effective Thermal Conductivity of Aluminum Matrix Composites, JOURNAL OF THE JAPAN INSTITUTE OF METALS, 81(10), 467-474, 2017
  286. Manufacturing process of particle intermetallic compound reinforced Al base composites by infiltration reaction method, Mechanical Engineering Journal, 3(2), Paper No.15-00492, 2016
  287. Effect of ZrO2 addition on the polarization behavior of Cr-ZrO2 composite coating, Mechanical Engineering Journal, 3(2), Paper No.15-00623, 2016
  288. Estimation of the electrical conductivity of TiB2/Al composites by using image analysis, Mechanical Engineering Journal, 3(3), Paper No.15-00577, 2016
  289. Effect of Microstructure on Mechanical and Thermal Properties of Titanium Boride Dispersed Aluminum Composites by Spark Plasma Sintering, Proc.17 th US-Japan Conf. on Composite Materials, Paper No. 57, pp.1-7.
  290. Preparation of High Temperature Lead-Free Solder Composites, Proc. of The Ninth Pacific Rim International Conference on Advanced Materials and Processing, 145-147, 201608
  291. Evaluation of Spatial Distribution of Second Phase in Composites with Machine Learning Technique, Proc. of The Ninth Pacific Rim International Conference on Advanced Materials and Processing, 152-154, 201608
  292. Preparation of VGCF Reinforced Magnesium Matrix Composites by Low Pressure Infiltration, Proc. of The Ninth Pacific Rim International Conference on Advanced Materials and Processing, 901-904, 201608
  293. Fabrication and Thermal of Lotus Structured SiO2/Al and SiO2+VGCF/Al Composites by Low Pressure Infiltration Method, Proc. of The Ninth Pacific Rim International Conference on Advanced Materials and Processing, 905-908, 201608
  294. Manufacturing of Carbon Nanotube Preform with High Porosity and Its Application in Metal Matrix Composite, Materials transaction, 58(5), 834-837, 201705
  295. Microstructures of Al3Ni Particles Reinforced Composites by Infiltration and Reaction Method and Their Properties, Materials Transactions, 8(58), 1235-1237, 201808
  296. Manufacturing of Carbon Nanotube Preform with High Porosity and Its Application in Metal Matrix Composite, Materials transaction, 5(58), 834-837, 201705
  297. Development of CNF/ Flame-resistant Magnesium Alloy Composites by Stir Casting, International Symposium on Green Manufacturing and Applications Proceedings, 49-50, 201706
  298. Evaluation of Microstructures of Al-Si Casting Alloy by Using Image Mean Free Path, International Symposium on Green Manufacturing and Applications Proceedings, 51-53, 201706
  299. Structure Control Of VGCF/Aluminum Matrix Composite, International Symposium on Green Manufacturing and Applications Proceedings, 54-56, 201706
  300. Exploring Stable Structure of Solute Cluster in Al-Si Based Alloys by Using First Principles Calculation and Kinetic Monte Carlo Method, International Symposium on Green Manufacturing and Applications Proceedings, 69-71, 201706
  301. Evaluation of Interfacial Thermal Resistance of Al-SiC Composites by Using Image-Based Calculation, International Symposium on Green Manufacturing and Applications Proceedings, 72-74, 201706
  302. Microstructure Control of TiB2 Particle Dispersed Steel Composites, International Symposium on Green Manufacturing and Applications Proceedings,, 75-78, 201706
  303. Effect of Preparation Conditions on Thermal Properties of Graphite / Copper Composites, International Symposium on Green Manufacturing and Applications Proceedings, 79-82
  304. Particle Detection of Al-SiC Particle-Dispersed Composites by Using Image Recognition with Machine Learning Technique, International Symposium on Green Manufacturing and Applications Proceedings, 83-85, 201706
  305. Microstructure Analysis of High Porosity Nickel Porous Reinforced Metal Composites by Infiltration and Reaction Method, International Symposium on Green Manufacturing and Applications Proceedings, 90-94, 201706
  306. Control of Electrical and Thermal Properties on Sn-50Zn Alloy by 8 vol%Al2O3 Addition for Pb-Free AC-Low Voltage Fuse Elements, MATERIALS TRANSACTIONS, 54(2), 231-237, 2013
  307. Fabrication and characterization of unidirectional CF/Al composites, SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 18(3), 167-171, 2011
  308. Temperature simulation of Pb-free Sn-9Zn elements for a low voltage fuse, MATERIALS TRANSACTIONS, 47(9), 2413-2420, 2006
  309. Alloy Design of Ti Alloys Using Ubiquitous Alloying Elements and Characteristics of Their Levitation-Melted Alloys, MATERIALS TRANSACTIONS, 51(4), 740-748, 2010
  310. Property-Control of Ti Compacts in Spark Sintering Process, MATERIALS TRANSACTIONS, 54(2), 130-136, 2013