山田 啓司Keiji Yamada

Last Updated :2020/05/22

所属・職名
大学院先進理工系科学研究科 工学・情報:機械工学(A3・機械システム) 教授
メールアドレス
keijihiroshima-u.ac.jp

基本情報

学位

  • 博士(工学) (金沢大学)
  • 修士(工学) (金沢大学)

研究分野

  • 工学 / 機械工学 / 生産工学・加工学

研究キーワード

  • 機械加工,レーザ加工

教育活動

授業担当

  1. 2020年, 教養教育, 4ターム, 産業と技術[旧パッケージ]
  2. 2020年, 教養教育, 2ターム, 機械システムの設計と最適化
  3. 2020年, 学部専門, 3ターム, 機械・輸送工学概論
  4. 2020年, 学部専門, セメスター(前期), 機械工学実験I
  5. 2020年, 学部専門, セメスター(後期), 機械創成実習
  6. 2020年, 学部専門, セメスター(後期), 機械創成実習
  7. 2020年, 学部専門, 3ターム, 機械設計
  8. 2020年, 学部専門, セメスター(後期), Mechanical Engineering Seminar
  9. 2020年, 修士課程・博士課程前期, セメスター(前期), 機械システム工学講究IB
  10. 2020年, 修士課程・博士課程前期, セメスター(前期), 機械システム工学講究IIA
  11. 2020年, 修士課程・博士課程前期, セメスター(後期), 機械システム工学講究IIA
  12. 2020年, 修士課程・博士課程前期, セメスター(後期), 機械システム工学講究IIB
  13. 2020年, 修士課程・博士課程前期, セメスター(前期), 機械システム工学セミナーIB
  14. 2020年, 修士課程・博士課程前期, セメスター(前期), 機械システム工学セミナーIIA
  15. 2020年, 修士課程・博士課程前期, セメスター(後期), 機械システム工学セミナーIIA
  16. 2020年, 修士課程・博士課程前期, セメスター(後期), 機械システム工学セミナーIIB
  17. 2020年, 修士課程・博士課程前期, 1ターム, 機械工学特別演習A
  18. 2020年, 修士課程・博士課程前期, 2ターム, 機械工学特別演習A
  19. 2020年, 修士課程・博士課程前期, 3ターム, 機械工学特別演習B
  20. 2020年, 修士課程・博士課程前期, 4ターム, 機械工学特別演習B
  21. 2020年, 修士課程・博士課程前期, 年度, 機械工学特別研究
  22. 2020年, 修士課程・博士課程前期, 1ターム, 精密工作学特論
  23. 2020年, 博士課程・博士課程後期, 年度, 機械工学特別研究

研究活動

学術論文(★は代表的な論文)

  1. Performance evaluation method for cutting fluids using cutting force in micro-feed end milling, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 62巻, pp. 232-243, 202003
  2. Experimental Study on the Relationship between Direction of Crack Propagation and Thermal Stress Distribution in Laser Cleaving Process for Glass Substrate, Journal of Laser Micro/Nanoengineering, 14巻, 2号, pp. 161-167, 201910
  3. Evaluation Method for Friction Coefficient of Machining Fluids Using Cutting Force in Micro Feed End Milling, Applied Mechanics and Materials, 894巻, pp. 158-163, 201909
  4. Improved Machinability of High Hardened Die Steel by Using Pulsed Laser Surface Treatment, International Journal of Precision Engineering and Manufacturing, 20巻, 10号, pp. 1667-1676, 20190629
  5. Analysis of Transient Signal using Hilbert-Huang Transform for Chatter Monitoring in Turning Process, Proc. of ICITISEE2019, 20191102
  6. Planetary motion cross bar friction test for application in machining process, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 62巻, pp. 143-150, 20191127
  7. Milling Process Monitoring Based on Vibration Analysis Using Hilbert-Huang Transform, International Journal of Automation Technology, 12巻, 5号, pp. 688-698, 20180905
  8. ★, Application of Hilbert–Huang Transform for Vibration Signal Analysis in End-milling Article reference, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 53巻, pp. 263-277, 2018
  9. Effect of coating layer loss on the wear rate change of coated carbide tools in turning process, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 50巻, pp. 1-7, 201710
  10. A new quantitative evaluation for characteristic of surface roughness in turning, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 50巻, pp. 20-26, 201710
  11. 組織および機械的特性の異なる球状黒鉛鋳鉄の被削性, 砥粒加工学会誌, 61巻, 3号, pp. 139-144, 201703
  12. Wear mechanism of coated tools in the turning of having wide range of tensile strength ductile cast iron, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 47巻, pp. 46-53, 201701
  13. ★, Photoelastic observation of stress distributions in laser cleaving of glass substrates, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 47巻, pp. 333-343, 201701
  14. Study of comparing cutting force signal features for dry, air cooling and minimum quantity lubrication (MQL) drilling, JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 11巻, 2号, 2017
  15. Relationship between Cutting Heat and Tool Edge Temperature in End Milling of Titanium Alloy, Key Engineering Materials, 749巻, pp. 15-20
  16. Wet Core Drilling of CFRP with an Electrodeposited Diamond Core Drill - Effects of Cutting Conditions on Chip Evacuation and Core Jamming, Key Engineering Materials, 749巻, pp. 58-64
  17. Difference of Feed Marks in Cutting Fluids when Turning Stainless Steel, Key Engineering Materials, 749巻, pp. 111-117
  18. Wear Characteristics of Coated Carbide Tools in the Face Milling of Ductile Cast Iron, Key Engineering Materials, 749巻, pp. 178-184
  19. Pulsed Laser Surface Treatment for Improvement of Machinability, Key Engineering Materials, 725巻, pp. 641-646, 2016
  20. Photoelastic observation of thermal stress in laser cleaving of hard brittle materials, Proc. of 8th International Conference on Leading Edge Manufacturing in 21st Century, 20151019
  21. Wear characteristics of coated carbide tools in the turning of ductile cast iron, Proc. of 8th International Conference on Leading Edge Manufacturing in 21st Century, 20151019
  22. Influence of coating material on the curl of chip in tapping, Proc. of 8th International Conference on Leading Edge Manufacturing in 21st Century, 20151019
  23. Study of chatter characteristics on thin-walled turning, Proc. of 8th International Conference on Leading Edge Manufacturing in 21st Century, 20151019
  24. Stability of Adhered Material to the Cutting Edge of a Cermet Insert in Turning of an Austenitic Stainless Steel, Key Engineering Materials, 656-657巻, pp. 656-657, 20150401
  25. Machine Learning of Cutting Conditions in Drilling Using Artificial Neural Network, Key Engineering Materials, 656-657巻, pp. 328-334, 20150401
  26. Estimating the Cutting Characteristics of SpiralInfluence of the Cutting Fluid on Tool Edge Temperature in End Milling of Titanium Alloy Tap - Tool Edge Temperature and Fluctuation of Cutting Forces, Key Engineering Materials, 656-657巻, pp. 296-301, 20150401
  27. Estimating the Cutting Characteristics of Spiral Tap - Tool Edge Temperature and Fluctuation of Cutting Forces, Key Engineering Materials, 656-657巻, pp. 261-265, 20150401
  28. Basic Study on Thermo Chemical Turning Method for Metal Bonded Diamond Wheels, Key Engineering Materials, 656-657巻, pp. 180-184, 20150401
  29. Effect of different features to drill-wear prediction with back propagation neural network, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 38巻, 4号, pp. 791-798, 20141001
  30. Comparison of applying static and dynamic features for drill wear prediction, JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 8巻, 4号, 20140601
  31. Permeability control method with laser for porous bushings of aerostatic bearings, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 14巻, 5号, pp. 779-784, 20130601
  32. A Basic Study on the Relations between Machining Conditions and the Static & Dynamic Components of Forces in Drilling, International Journal of Automation Technology, 7巻, 3号, pp. 345-352, 20130501
  33. Applying Constant Pressure Unit to Ductile Mode Cutting of Hard and Brittle Materials, International Journal of Automation Technology, 7巻, 3号, pp. 278-284, 20130501
  34. Drill Wear Prediction with Features Extracted From the Static & Dynamic Components of Forces by Wavelet Packet Transform Using Back Propagation Neural Network, International Journal of Automation Technology, pp. 452-456, 20130501
  35. ★, A Study on Aspects of Attrition Wear of Cutting Grains in Grinding Process, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 12巻, 6号, pp. 965-973, 20111201
  36. ユビキタスFe-B系硬質合金の放電焼結と特性評価, 粉体粉末冶金協会誌, 58巻, 8号, pp. 487-494, 20110801
  37. YAG高調波を利用したシリコンの微細加工─レーザ誘起熱変形によるマイクロレンズ作製の加工光学系への応用─, 精密工学会誌, 76巻, 11号, pp. 1283, 20101101
  38. 切削抵抗動的成分による工具―被削材間の凝着性評価, 精密工学会誌, 76巻, 8号, pp. 926, 20100801
  39. Forming of Microstructure on Hard Brittle Materials in Ductile Mode Cutting, Key Engineering Materials, 447-448巻, 20100601
  40. アモルファスSiC被膜超硬工具によるアルミニウム合金の切削, 砥粒加工学会誌, 54巻, 4号, pp. 230, 20100401
  41. Detection of chatter by the measurement of acceleration of the spindle head in the axial direction, Proc. of the Leading Edge of Manufacuturing in 21th century, pp. 161_14-06, 20091201
  42. New Method for Controlling Air Permeability of Porous Metal with Laser, Asian Symposium for Precision Engineering and Nanotechnology 2009, pp. 2C5, 20091101
  43. Transfer of Tool Geometry onto the Machined Surface in Continuous Turning of Adhesive Metals, Asian Symposium for Precision Engineering and Nanotechnology 2009, pp. 2B5, 20091101
  44. 主軸端部への切りくず噛み込み検知の新方法, 精密工学会誌, 75巻, 10号, pp. 1250-1254, 20091001
  45. ★, Dental Treatment with Laser Beam ─Monitoring Enabling Safe Hard-Tooth-Tissue Removal ─, International Journal of Automation Technology, 3巻, 5号, pp. 494-501, 20090901
  46. Influence of Additional Electrical Current on Machinability of BN Free-Machining Steel in Turning, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 26巻, 2号, pp. 171-178, 20090701
  47. The Relationship between Dynamic Components of Cutting Force and Adhesion of Tool-Chip Interface, Key Engineering Materials, 407-408巻, pp. 469-472, 20090401
  48. Mirror Finishing of Austenitic Stainless Steel with a Cermet Insert, Key Engineering Materials, 407-408巻, pp. 384-387, 20090401
  49. Laser-assisted Truing for Metal-bonded Diamond Wheel, Key Engineering Materials, 407-408巻, pp. 122-125, 20090401
  50. 電子デバイス用ウエハのレーザ割断, 精密工学会誌, 75巻, 3号, pp. 443-445, 20090301
  51. セラミックスのレーザ割断, 砥粒加工学会誌, 53巻, 2号, pp. 111-113, 20090201
  52. Influence of Additional Electrical Current on Machinability of BN Free-Machining Steel in Turning, JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 3巻, 2号, pp. 171-178, 2009
  53. MQL加工用ミストセンサの開発およびミスト噴出パターンのドリル摩耗への影響, 砥粒加工学会誌, 52巻, 9号, pp. 525-530, 20080901
  54. YAGレーザによる歯科治療に関する研究(第3報) ─窩洞形成における水の影響─, 精密工学会誌, 74巻, 2号, pp. 150-154, 20080201
  55. CO2レーザによる鋼の表面改質層の被削性とその改善, 日本機械学会論文集C編, 73巻, 727号, pp. 879-884, 20070401
  56. ドリル加工におけるMQLの効果(第1報)─加工穴の特徴─, 精密工学会誌, 73巻, 2号, pp. 232-236, 20070201
  57. On-machine Evaluation Method for misengagement of toolholder by inclusion of Chips, Proc. 6th Int. Conf. on Progress of Machining Technology, pp. 57-60, 20061101
  58. Reduction of Adhesion with an Amorphous Silicon Coated Tool, Progress of Machining Technology (Proc. of 8th. Int. Conf. on Progress of Machining Tech.), pp. 205-208, 20061101
  59. Visualizing and Measuring of Splayed Mixture with Optical Dispersion Method for MQL Drilling, Progress of Machining Technology (Proc. of 8th. Int. Conf. on Progress of Machining Tech.), pp. 297-300, 20061101
  60. On-Machine Evaluation Method for Misengagement of Toolholder by Inclusion of Chips, Proc. 8th Int. Conf. on Progress of Machining Technology, pp. 57-60, 20061101
  61. Reduction of Adhesion with an Amorphous Silicon Coated Tool, Proc. 8th Int. Conf. on Progress of Machining Technology, pp. 57-60, 20061101
  62. Visualizing and Measuring of Splayed Mixture with Optical Dispersion Method for MQL Drilling, Proc. 8th Int. Conf. on Progress of Machining Technology, pp. 297-300, 20061101
  63. Tool Wear under High-speed End Milling of Ti-6Al-4V Alloy, Material Scinence and Technology (MS&T) 2006, Product Manufacturin巻, pp. 255-263, 20060901
  64. Nd:YAGレーザによるSiウエハの割断加工に関する研究 ─ 冷凍チャックシステム導入による効果 ─, 精密工学会誌, 72巻, 3号, pp. 393-397, 20060301
  65. Effect of Oil Mist on Tool Temperature in Cutting, Trans. of the ASME= J. of Manufac. Sci. and Eng., 128巻, 1号, pp. 130-135, 20060201
  66. Thermal Damage of Silicon Wafer in Thermal Cleaving Process with Pulsed Laser and CW Laser, Proc. of Photonics West 2006: Lasers and Applications in Science and Engineering, 20060101
  67. Hardmilling with CBN and Coated Tools, Proc. of the Third Int. Conf. on Leading Edge Manufacturing in 21st. Century, pp. 497-500, 20051001
  68. Temperature Measurement in Laser Forming of Sheet Metal, Annals of the CIRP, 54巻, 1号, pp. 179-182, 20050801
  69. レーザフォーミング加工に関する基礎的研究(第2報), 精密工学会誌, 71巻, 4号, pp. 481-485, 20050401
  70. 小径ボールエンドミルによる高速ミーリングに関する研究, 精密工学会誌, 70巻, 12号, pp. 1527-1532, 20041201
  71. Influence of Temperature and Process Parameters on Bending Angle in Laser Forming, Proc. 6th Int. Conf. on Progress of Machining Technology, pp. 354-359, 20041201
  72. Effect of Additional Current on Cutting Mechanism of Free Machining Steels in Turning, Progress of Machining Technology (Proc. of 7th. Int. Conf. on Progress of Machining Tech.), pp. 786-791, 20041201
  73. Laser Dressing of Metal-Bonded Diamond Wheel, Proc. of ASPE 19th. Annual Meeting, 20041001
  74. レーザ歯科治療における加工音観測による除去量モニタリング, レーザー歯学会誌, 15巻, 2号, pp. 61-66, 20040901
  75. 水溶性加工液を用いたマグネシウムの超仕上げ, 砥粒加工学会誌, 48巻, 6号, pp. 319-323, 20040601
  76. Rapid Fabrication of Various-shape Microlens by Laser-induced Deformation, Proc. of 4th. Int. Conf. of EUSPEN, pp. 57-58, 20040501
  77. Fabrication of Cylindrical Plastic Microlens Using Er:YAG Laser Beam -Influence of Process Parameter-, Proc. 5th Int. Sym. on Laser Precision Microfabrication, pp. 243-248, 20040501
  78. レーザ歯科治療における分光観測による熱損傷モニタリング, レーザー歯学会誌, 15巻, 1号, pp. 1-5, 20040301
  79. Evaluation of Grinding Wheel Surface by Means of Grinding Sound Discrimination, JSME Int. Journal Ser. C, 47巻, 1号, pp. 52-58, 20040301
  80. Thermal Stress Cleaving with Pulsed YAG Laser as New Dicing Method of Silicon Wafer, Proc. of 4th. Asian Pacific Laser Symposium, pp. CD-ROM, 20040301
  81. Influences of Temperature on Bending Angle in Laser Forming Process, Proc. of Int. Conf. on Leading Edge Manufacturing in 21st Century, pp. 885-890, 20031101
  82. Evaluation of Grinding Wheel Surface by Means of Grinding Sound Discrimination, Proc. of Int. Conf. on Leading Edge Manufacturing in 21st Century, pp. 234-246, 20031101
  83. レーザ誘起熱変形によるプラスチック・マイクロレンズの作製, 精密工学会誌, 69巻, 10号, pp. 1487-1491, 20031001
  84. ニューラルネットワークによる砥石作業面状態の識別 ─砥石作業面性状のインプロセス評価に関する研究─, 精密工学会誌, 69巻, 2号, pp. 258-262, 20030201
  85. パルスYAGレーザによる脆性材料の割断加工  ─Siウエハ割断における熱応力解析─, 精密工学会誌, 69巻, 1号, pp. 120-124, 20030101
  86. YAGレーザによる歯科治療に関する研究(第2報) ─Nd:YAGレーザとEr:YAGレーザの比較─, 精密工学会誌, 68巻, 12号, pp. 1580-1584, 20021201
  87. Thermal Stress Cleaving of Brittle Materials by Laser Beam, Annals of the CIRP, 51巻, 1号, pp. 149-152, 20020801
  88. Investigation of Temperature at Tool-chip Interface in Turning Using Two-color Pyrometer, Trans. of the ASME= J. of Manufac. Sci. and Eng., 124巻, 2号, pp. 200-207, 20020501
  89. 水溶性加工液による耐熱合金の超仕上げ, 精密工学会誌, 68巻, 3号, pp. 430-434, 20020301
  90. ★, パルスYAGレーザによるSiウエハの割断機構に関する研究, 精密工学会誌, 67巻, 11号, pp. 1861-1865, 20011101
  91. Temperature on Flank Face of Cutting Tool in High Speed Milling, Annals of the CIRP, 50巻, 1号, pp. 37-40, 20010801
  92. レーザフォーミング加工に関する基礎的研究, 精密工学会誌, 67巻, 2号, pp. 300-305, 20010201
  93. 断続切削における工具逃げ面温度 ─高速エンドミル加工に関する研究(第1報)─, 精密工学会誌, 66巻, 11号, pp. 1786-1791, 20001101
  94. YAGレーザによる歯科治療に関する研究(第1報) ─レーザ照射部の温度─, 精密工学会誌, 66巻, 9号, pp. 1388-1393, 20000901
  95. Effect of Cooling Methods on Grinding Temperature, Proc. 6th Int. Conf. on Progress of Machining Technology, pp. 381-387, 20000901
  96. Studies on Temperature in Laser Forming Process, Proc. of 8th. Int. Conf. on Sheet Metal, pp. 313-322, 20000401
  97. Temperature Measurement of CBN Tool in Turning of High Hardness Steel, Annals of the CIRP, 48巻, 1号, pp. 63-66, 19990801
  98. 旋削加工における工具-切りくず接触面温度の測定, 日本機械学会論文集 C, 65巻, 633号, pp. 2094-2101, 19990501
  99. ★, CO2レーザ加工における照射部温度と吸収率, 精密工学会誌, 65巻, 1号, pp. 126-130, 19990101
  100. CBN工具による高硬度鋼の旋削温度測定, 精密工学会誌, 64巻, 11号, pp. 1684-1688, 19981101
  101. Measurement of Interface Temperature between a Cutting Tool and a Chip in Turning Using Two-color pyrometer, Proceedings of the 3rd International Symposium on Advanced and Aerospace Science & Technology in Indonesia, 2巻, pp. 401-408, 19980801
  102. MD法によるDLC薄膜の機械的特性の評価--圧子押込み特性の解析による硬さの評価--, 精密工学会誌, 63巻, 12号, pp. 1735-1740, 19971201
  103. Temperature of Work Materials Irradiated with CO2 Laser, Annals of the CIRP, 46巻, 1号, pp. 117-122, 19970801
  104. 鋼の平面研削における熱流入割合, 精密工学会誌, 60巻, 11号, pp. 1616-1620, 19941101
  105. ★, Measurement of Grinding Temperature of Ceramics Using Infrared Radiation Pyrometer with Optical Fiber, Trans. of the ASME= J. of Eng. for Industry, 114巻, 3号, pp. 317-322, 19920801
  106. カルコゲナイド光ファイバを用いた赤外線輻射温度計による常圧焼結SiCの研削温度測定, 精密工学会誌, 56巻, 9号, pp. 1683-1685, 19900901
  107. ふっ化物ファイバを用いた赤外線輻射温度計による常圧焼結Si3N4の研削温度測定, 精密工学会誌, 56巻, 8号, pp. 1452-1455, 19900801

受賞

  1. 2011年06月14日, 工作機械技術振興賞(論文賞), 工作機械技術振興財団, 「切削抵抗動的成分による工具-被削材間の凝着性評価」
  2. 2011年03月15日, 論文賞, 精密工学会
  3. 2000年03月, 精密工学会賞, 社団法人精密工学会
  4. 2003年03月, 精密工学会北陸信越支部 奨励賞, 精密工学会北陸信越支部

取得

  1. 特許権, 特許4888858, 2011年12月22日, 工作機械におけるツールホルダの傾き検出方法および傾き検出装置
  2. 特許権, 2004年06月10日, レーザ歯科治療機器及びレーザ治療方法
  3. 特許権, 2003年09月24日, マイクロレンズおよびマイクロレンズアレイの作製法
  4. 特許権, 2004年01月29日, レーザ割断加工における冷凍チャッキング方法および装置

社会活動

委員会等委員歴

  1. 広島県産業科学技術研究所プロジェクト研究員, 2011年04月, 2014年03月, (財)ひろしま産業振興機構

その他社会貢献活動(広大・部局主催含)

  1. 機械加工技術の環境対応, 広島大学, 人に優しい、地球に優しいものづくり, 2007年/09月/07日, 2007年/09月/07日, 講師
  2. 知能化生産工学, 放送大学, 面接授業, 2008年/08月/12日, 2008年/08月/12日, 講師