Kunihiro Fukui

Last Updated :2025/07/07

Affiliations, Positions
Graduate School of Advanced Science and Engineering, Professor
Web Site
E-mail
kfukuihiroshima-u.ac.jp
Other Contact Details
1-4-1 KAGAMIYAMA, HIGASHIHIROSHIMA 739-8527, Japan
TEL : (+81)82-424-7715 FAX : (+81)82-424-7715
Self-introduction
We have been working on the wide research field to establish the fundamentals in powder technology, such as the improvement in the performance of the particle classifier, the optimization of the closed-circuit grinding process, the development of the measuring the particle size distribution. Based on the viewpoint of powder technology, we have been also engaging in the applied research to solve the energy problem and the environmental issues, such as the inhibition of the dusting for particulate wastes, the recycling of the fly ash and the incineration ash and, their application. In addition, we propose the novel powder reaction process applying the microwave heating system to the powder unit operation. This process can reduce the necessary reaction time remarkably to synthesize the highly functional particles, and can also develop the conversion and yields successfully. As the achievement in all these research findings is useful and inventive, many of them contribute to various industries through the patenting and the commercialization. In recent years, we have been also actively promoting cooperation among industry, academia and government, and committed to the expanding the research field of powder technology to the different field by the joint study.

Basic Information

Major Professional Backgrounds

  • 1996/04/01, 2005/03/31, Hiroshima University, Department of Chemical Engineering, Research Assistant
  • 2005/04/01, 2011/08/31, Hiroshima University, Department of Chemical Engineering, Associate Professor
  • 2011/09/01, 2020/03/31, Hiroshima University, Department of Chemical Engineering, Professor

Educational Backgrounds

  • Kyoto University, Graduate School of Engineering, Chemical Engineering, Japan, 1993/04, 1996/03
  • Kyoto University, Graduate School of Engineering, Chemical Engineering, Japan, 1991/04, 1993/03
  • Kyoto University, Faculty of Engineering, Chemical Engineering, Japan, 1987/04, 1991/03

Academic Degrees

  • Doctor of Engineering, Kyoto University
  • Master of Engineering, Kyoto University

Educational Activity

  • [Bachelor Degree Program] School of Engineering : Cluster 3(Applied Chemistry, Biotechnology and Chemical Engineering) : Program of Chemical Engineering
  • [Master's Program] Graduate School of Advanced Science and Engineering : Division of Advanced Science and Engineering : Chemical Engineering Program
  • [Doctoral Program] Graduate School of Advanced Science and Engineering : Division of Advanced Science and Engineering : Chemical Engineering Program

In Charge of Primary Major Programs

  • Chemical Engineering

Research Fields

  • Engineering;Process / Chemical engineering;Properties in chemical engineering process / Transfer operation / Unit operation

Research Keywords

  • Nano Particle
  • Powder Handling Process
  • Aerosol
  • Size Classification
  • Numerical Simulation
  • Recycle
  • Microwave
  • Dust Collection
  • Biomass

Affiliated Academic Societies

Educational Activity

Course in Charge

  1. 2025, Undergraduate Education, Second Semester, Experimental Chemical Engineering
  2. 2025, Undergraduate Education, 1Term, Powder Technology
  3. 2025, Undergraduate Education, 2Term, Process Control Eng.
  4. 2025, Undergraduate Education, Year, Graduation Thesis
  5. 2025, Graduate Education (Master's Program) , First Semester, Special Exercises on Chemical Engineering A
  6. 2025, Graduate Education (Master's Program) , 3Term, Special Exercises on Chemical Engineering B
  7. 2025, Graduate Education (Master's Program) , 4Term, Special Exercises on Chemical Engineering B
  8. 2025, Graduate Education (Master's Program) , Year, Special Study on Chemical Engineering
  9. 2025, Graduate Education (Master's Program) , 3Term, Fine Particle Technology
  10. 2025, Graduate Education (Doctoral Program) , Year, Special Study on Chemical Engineering

Research Activities

Academic Papers

  1. Prediction of fluid-particle dynamics and performance in fibrous filters obtained from X-ray CT using convolutional neural network and discrete phase model, CHEMICAL ENGINEERING JOURNAL, 514, 20250615
  2. Approaching particle deposition separation characteristics in the Empty Nose Syndrome (ENS) nasal cavities with CT image-based nasal cavity and CFD-DPM simulations, POWDER TECHNOLOGY, 458, 20250531
  3. Novel physics-informed optimization framework for complex multi-physics problems: Implementation for a sweeping gas membrane distillation module, CHEMICAL ENGINEERING JOURNAL, 498, 20241015
  4. Classification performance analysis of a louver classifier with a tilted sidewall and its application to the separation of unburned carbon from biomass combustion ash, SEPARATION AND PURIFICATION TECHNOLOGY, 355, 20250301
  5. Data-driven approach for design and optimization of rotor-stator mixers for miscible fluids with different viscosities, CHEMICAL ENGINEERING JOURNAL, 499, 20241101
  6. Effect of filter microstructure on filtration characteristics in a nonwoven bag filter: A resolved CFD-DEM approach coordinated with X-ray computed tomography image, CHEMICAL ENGINEERING SCIENCE, 299, 20241105
  7. Investigation on the Collection Mechanism of van der Waals Force in Air Filtration by Numerical Simulation and Empirical Model Development, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 63(23), 10410-10426, 20240528
  8. Numerical investigation of oil droplet detachment from wall surface by a microbubble using ternary phase-field model, AICHE JOURNAL, 70(3), 202403
  9. Influence of ash species on particle size dependence of water- and citric-acid-soluble potassium concentrations of woody biomass combustion ashes with low potassium content, JOURNAL OF THE ENERGY INSTITUTE, 111, 202312
  10. Morphological Change of Antimony Trioxide Fine Particles through Impaction, Compaction or Grinding., Journal of the Research Association of Powder Technology, Japan, 32(1), 23-30, 1995
  11. Effects of exposure temperature on degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas at high temperature, ADVANCED POWDER TECHNOLOGY, 34(10), 202310
  12. Assessing the formation and destruction behaviors of fine powder agglomerates in vibrating fluidized beds using the Ergun equation, POWDER TECHNOLOGY, 428, 20231001
  13. Performance analysis and optimization of sweep gas membrane distillation module using high-resolution computational model and machine learning, CHEMICAL ENGINEERING JOURNAL, 473, 20231001
  14. Hierarchical porous zeolite synthesis from coal fly ash via microwave heating, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 661, 20230320
  15. Prediction of submicron particle dynamics in fibrous filter using deep convolutional neural networks, PHYSICS OF FLUIDS, 34(12), 202212
  16. Numerical simulation of aerosol permeation through microstructure of face masks coordinating with x-ray computed tomography images, AIP ADVANCES, 12(12), 20221201
  17. Performance characterization of a novel compact dust collector with pleated filter cartridges, SEPARATION AND PURIFICATION TECHNOLOGY, 305, 20230115
  18. Application of deep learning neural networks for the analysis of fluid-particle dynamics in fibrous filters, CHEMICAL ENGINEERING JOURNAL, 455, 20230101
  19. Effect of the operation temperature on the hydrodynamics and performances of a cyclone separator, ADVANCED POWDER TECHNOLOGY, 33(11), 202211
  20. Numerical modeling for particulate flow through realistic microporous structure of microfiltration membrane: Direct numerical simulation coordinated with focused ion beam scanning electron microscopy, POWDER TECHNOLOGY, 410, 202209
  21. Influence of pulse-jet pressure on the performance the cartridge type dust collector in clean-on-demand mode, FILTECH2023, 20230215
  22. Influence of Temperature and Gas Species on Degradation Behavior of PPS Filter Medium by Exposure to High Temperature Corrosive Gas, 2nd Taiwan-Japan Workshop on Powder Processing Technology for High Quality Products, 20230309
  23. Effective use of biomass powder combustion ash using pulverization and classification technologies, 3rd Taiwan-Japan Workshop on Powder Processing Technology for High Quality, 20250227
  24. Unveiling filtration dynamics within a bagfilter: Direct numerical simulation coordinated X-ray computed tomography imaging, 3rd Taiwan-Japan Workshop on Powder Processing Technology for High Quality, 20250227
  25. Water- and citric acid-solubilization of potassium components in biomass combustion ash by kaolin addition, 10th International Conference on Engineering for Waste and Biomass Valorisation, 20240821
  26. Recovery of citric acid-soluble potassium components from biomass combustion bottom ash using both grinding and classification, The 9th Asian Particle Technology Symposium (APT2024), 20241203
  27. Effects of dispersants and floc formation on yielding phenomena for concentrated silica slurry, The 9th Asian Particle Technology Symposium (APT2024), 20241203
  28. Evaluation of the reaction properties of Ca(OH)2 powder and CO2 at high temperature, The 9th Asian Particle Technology Symposium (APT2024), 20241204
  29. High-resolution numerical simulation of particulate flow permeating through fibrous filter, 4th International Symposium on Multiscale Multiphase Process Engineering (MMPE2022), 20220927
  30. Degradation of polyphenylene sulfide non-woven bag-filter media by HCl or NO2 gases at high temperature, 7th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2022), 20221116
  31. Denitration characteristics of aqueous metal nitrate solution by microwave heating with carbon-containing alumina composite ceramic jacket, 7th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2022), 20221116
  32. Component separation from binary powder mixture in a vibrating fluidized bed based on differences in agglomeration properties, The 8th Asian Particle Technology Symposium (APT2021), 20211013
  33. Effects of the pulse jet cleaning interval on the performance of pleated filter in dust collector, The 8th Asian Particle Technology Symposium (APT2021), 20211013
  34. Effect of ion species and particle surface properties on change in particle electrophoresis caused by changed applied electric field, The 8th Asian Particle Technology Symposium (APT2021), 20211013
  35. Permeation of particles through microfiltration membrane: direct numerical simulation coordinated with FIB-SEM, The 8th Asian Particle Technology Symposium (APT2021), 20211013
  36. Influence of ambient conditions on the degradation of PPS filter media by NO2 gas at high temperature, The 8th Asian Particle Technology Symposium (APT2021), 20211013
  37. Pore-Scale Direct Numerical Simulation of Particulate Flow Permeating through Fibrous Filter Obtained from X-ray CT, The 3rd International Symposium for Computational Particle Technology, 20211118
  38. Principle of the cyclone classifier and its application to the recycling of biomass combustion ash as fertilizer material, International Guest Lecture of ITS, 20211221
  39. CFD Model Development and Experimental Measurements forAmmonia-Water Separation Using a Vacuum Membrane DistillationModule, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 61(21), 7381-7396, 20220601
  40. Influence of pulse-jet cleaning pressure on performance of compact dust collector with pleated filter operated in clean-on-time mode, ADVANCED POWDER TECHNOLOGY, 33(8), 20220801
  41. Effect of liquid volume fraction and shear rate on rheological properties and microstructure formation in ternary particle/oil/water dispersion systems under shear flow: two-dimensional direct numerical simulation, SOFT MATTER, 18(22), 4338-4350, 20220608
  42. High-Resolution Numerical Simulation of Microfiltration of Oil-in-Water Emulsion Permeating through a Realistic Membrane Microporous Structure Generated by Focused Ion Beam Scanning Electron Microscopy Images, LANGMUIR, 38(6), 2094-2108, 20220215
  43. Distributions of Fiber Mass, Air Permeability, and Filter Efficiency in Nonwoven Fabric Bag Filters, CHEMICAL ENGINEERING & TECHNOLOGY, 44(3), 535-541, 20210301
  44. Effect of Surface Wettability on Droplet Coalescence and Pressure Drop in a Fibrous Filter: Direct Numerical Simulation Coordinated with X-ray Computed Tomography Images, INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 60(10), 4168-4179, 20210317
  45. Synthesis of NiCuZn ferrite nanoparticles from metallic nitrate solutions using the microwave direct denitration method and evaluation of its properties, PARTICULATE SCIENCE AND TECHNOLOGY, 39(4), 427-435, 20210519
  46. Direct numerical simulation of permeation of particles through a realistic fibrous filter obtained from X-ray computed tomography images utilizing signed distance function, POWDER TECHNOLOGY, 385, 131-143, 20210601
  47. Synthesis of zeolites with hierarchical porous structures using a microwave heating method, COLLOID AND INTERFACE SCIENCE COMMUNICATIONS, 42, 20210531
  48. Effects of NO2 gas concentration on the degradation of polyphenylene sulfide non-woven bag filter at high temperature, ADVANCED POWDER TECHNOLOGY, 32(9), 3278-3287, 20210901
  49. Direct numerical simulation and experimental validation of flow resistivity of nonwoven fabric filter, AICHE JOURNAL, 66(2), 202002
  50. Microwave direct denitration for synthesis of Cu-Ce-Zr-O composite oxide and its characterization, POWDER TECHNOLOGY, 362, 26-31, 20200215
  51. Electrophoretic classification based on differences in electrophoretic mobility caused by change in the applied electric field, POWDER TECHNOLOGY, 362, 586-590, 20200215
  52. Phase-Field Simulation of the Coalescence of Droplets Permeating through a Fibrous Filter Obtained from X-ray Computed Tomography Images: Effect of the Filter Microstructure, LANGMUIR, 36(17), 4711-4720, 20200505
  53. Utilization of woody biomass combustion fly ash as a filler in the glue used for plywood production, ADVANCED POWDER TECHNOLOGY, 31(11), 4482-4490, 202011
  54. Evaluation of the Characteristics of Metal Nitrate Aqueous Solutions by Microwave Heating and the Morphologies of Synthesized Metal Oxide Powders, J. Soc. Powder Technol., Japan, 57(8), 484-494, 20200912
  55. Semiphenomenological model to predict hardening of solid-liquid-liquid systems by liquid bridges, GRANULAR MATTER, 21(4), 201911
  56. A continuous-flow exposure method to determine degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas at high temperature, ADVANCED POWDER TECHNOLOGY, 30(12), 2881-2889, 201912
  57. Technological development of the particle size adjustment of dry recovered powder, Global 2019, 20190926
  58. Evaluation of agglomeration and disruption for fine powder in vibrating fluidized bed, APCChE 2019, 20190925
  59. Electrophoretic classification based on differences in electrophoretic mobility caused by change in the applied electric field, APCChE 2019, 20190925
  60. Direct numerical simulation of flow resistivity and oil droplet coalescence on x-ray ct images of nonwoven fabrics filters, APCChE 2019, 20190926
  61. Effect of the temperature on the degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas with a continuous-flow exposure method, FILTECH2019, 20191023
  62. Effects of heating conditions on the particle characteristics of uranium oxide powders synthesized from uranyl nitrate solutions via microwave heating, PACRIM13, 20191028
  63. Classification performance analysis of a novel cyclone with a slit on the conical part by CFD simulation, SEPARATION AND PURIFICATION TECHNOLOGY, 190, 25-32, 20180108
  64. ★, Existence Form of Potassium Components in Woody Biomass Combustion Ashes and Estimation Method of Its Enrichment Degree, ENERGY & FUELS, 32(1), 517-524, 201801
  65. Utilization of incineration fly ash from biomass power plants for zeolite synthesis from coal fly ash by microwave hydrothermal treatment, ADVANCED POWDER TECHNOLOGY, 29(3), 450-456, 201803
  66. Development of the Performance Test Method for the Plug-in Type Pulse Jet Dust Collector, FILTECH2018, G10-03, 20180314
  67. Dependence of Chemical Components in Woody Biomass Combustion Ash on the Particle Size and Its Utilization for the Fertilizer, 8th World Congress on Particle Technology, Renewable Energy, Bioenergy and Energy Storage I, 20180425
  68. Component Separation in a Vibrating Fluidized Bed Based on Differences in Agglomeration Properties of Particles, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 51(7), 576-583, 201807
  69. Effects of particle mass loading on the hydrodynamics and separation efficiency of a cyclone separator, JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 90, 61-67, 201809
  70. Synthesis of potassium-type zeolites by the reverse-micelle method with microwave heating, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 555, 532-538, 20181020
  71. Analysis of gelation characteristics of concentrated suspension by capillary force, ICCCI2018, 1-I-A-08, 20180710
  72. Synthesis of Cu-Ce-Zr oxide catalyst nanoparticle by microwave denitration method, ICCCI2018, P-A-09, 20180711
  73. Synthesis of potassium-type zeolite by reverse-micelle microwave method, ICCCI2018, P-B-09, 20180711
  74. Influence of a laminarizer at the inlet on the classification performance of a cyclone separator, SEPARATION AND PURIFICATION TECHNOLOGY, 174, 408-416, 20170301
  75. ★, Morphology of woody biomass combustion ash and enrichment of potassium components by particle size classification, FUEL PROCESSING TECHNOLOGY, 156, 1-8, 201702
  76. Fine particle classification by a vertical type electrical water-sieve with various particle dispersion methods, SEPARATION AND PURIFICATION TECHNOLOGY, 175, 107-114, 20170324
  77. Validation of measured microwave absorption and temperature change for development of a single-mode-type microwave heating thermogravimetry apparatus, REVIEW OF SCIENTIFIC INSTRUMENTS, 88(2), 201702
  78. Synthesis of zeolite from coal fly ash by microwave hydrothermal treatment with pulverization process, ADVANCED POWDER TECHNOLOGY, 28(3), 798-804, 201703
  79. Effect of cold air stream injection on cyclone performance at high temperature, SEPARATION AND PURIFICATION TECHNOLOGY, 183, 293-303, 20170807
  80. Effect of Solids Loading on the Performance of a Cyclone Type Classifier for Separating Coarse Particles, Journal of the Society of Powder Technology, Japan, 54(6), 390-397, 20170601
  81. Wet Classification of a Submicron Silica Particle Using Counter-Electrophoresis and Orthogonal-Electrophoresis Method, Journal of the Society of Powder Technology, Japan, 54(1), 17-22, 20170101
  82. Classification Characteristics of a Cyclone Type Classifier with Improved Collection Boxes for Separating Particles near the Wall Surface, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 50(7), 492-500, 201707
  83. Utilization of incineration fly ash from biomass power plants for zeolite synthesis from coal fly ash by hydrothermal treatment, FUEL PROCESSING TECHNOLOGY, 167, 92-98, 20171201
  84. NiCuZn-Ferrite Nanoparticle Synthesis from Metallic Nitrate Solution Using Microwave Denitration Method, 7th Asian Particle Technology Symposium (APT 2017), O2-1, 20170731
  85. Utilization of Incineration Fly Ash from Biomass Power Plants for Zeolite Synthesis from Coal Fly Ash by Microwave Hydrothermal Treatment, 7th Asian Particle Technology Symposium (APT 2017), 20170731
  86. Existence form of Potassium Component in Woody Biomass Combustion Ash and Its Enrichment Method, 7th Asian Particle Technology Symposium (APT 2017), O11-1, 20170802
  87. Experimental and Numerical Studies on the Effect of the Mass Loading on the Separation Efficiency of a Cyclone Separator, 7th Asian Particle Technology Symposium (APT 2017), O16-7, 20170802
  88. Improvement of particle separation performance by new type hydro cyclone, SEPARATION AND PURIFICATION TECHNOLOGY, 158, 223-229, 20160128
  89. Effect of new blade of centrifugal separator on particle separation performance, SEPARATION AND PURIFICATION TECHNOLOGY, 162, 120-126, 20160413
  90. Effects of Sintered-Metal Cone Length on Gas-Cyclone Classification Performance, CHEMICAL ENGINEERING & TECHNOLOGY, 39(3), 484-490, 201603
  91. Recent Research Result of Fine Particle Classification, Journal of the Society of Powder Technology, Japan, 53(4), 202-211, 20160401
  92. Influence of the heating method on the particle characteristics of copper oxide powders synthesized from copper nitrate aqueous solutions, CHEMICAL ENGINEERING SCIENCE, 153, 108-116, 20161022
  93. Application of Novel Cyclone with Sintered Metal Cone to Classification and Filtration, 12th World Filtration Congress, 62-62, 20160413
  94. Effects of Particle Properties on Agglomerate Formation of Fine Particles in Vibrating Fluidized Bed, ASCON-IEEChE 2016, 39-42, 20161114
  95. Effects of the Flow Field of the Cyclone Inlet on its Separation Performance, ASCON-IEEChE 2016, 20161114
  96. Utilization of the Incineration Fly Ash from Biomass Power Plant for Zeolite Synthesis from Coal Fly Ash by Hydrothermal Treatment, ASCON-IEEChE 2016, 382-385, 20161114
  97. Effect of ring shape attached on upper outlet pipe on fine particle classification of gas-cyclone, SEPARATION AND PURIFICATION TECHNOLOGY, 141, 84-93, 20150212
  98. The effect of particle size distribution on effective zeta-potential by use of the sedimentation method, ADVANCED POWDER TECHNOLOGY, 26(2), 650-656, 201503
  99. CUT SIZE CONTROL OF NOVEL GAS CYCLONE SEPARATOR WITH SINTERED METAL CONE BY CLEAN-AIR INJECTION, FILTECH 2015, G10, 68, 20150224
  100. Improvement of Particle Separation in Louver-type Separator by Use of Numerical Simulation, the Society of Powder Technology, Japan, 52(5), 252-259, 20150501
  101. Nickel oxide powder synthesis from aqueous solution of nickel nitrate hexahydrate by a microwave denitration method, ADVANCED POWDER TECHNOLOGY, 26(3), 983-990, 201505
  102. Development and Evaluation of a Cyclone Type Classifier for Separating Coarse Particles, Journal of the Society of Powder Technology, Japan, 52(8), 435-444, 20150801
  103. Development of the Thermogravimetric Analysis Method Using Microwave Heating and Its Application, ICCCI 2015, 20150707
  104. Influence Of Heating Method On Particle Size And Morphology Of Metallic Oxide Powder Synthesized From Metallic Nitrate Aqueous Solution, APCChE2015, 313418-313418, 20150929
  105. Theoretical calculation of uncertainty region for spherical particles based on a picket fence, quasi-monodisperse particles, ADVANCED POWDER TECHNOLOGY, 25(2), 524-529, 201403
  106. Fine Particle Classification by Vertical Type Water-sieve with Electro-potential Applied to Flow, Journal of the Society of Powder Technology, Japan, 51(2), 68-76, 20140301
  107. Application of microwave heating to powder synthesis process, Taiwan-Japan Joint Seminar on Particle Technology, 1-15, 20140922
  108. Effect of Inlet Clean Air and Guide Plate on Fine Particle Classification of Gas-cyclone, Journal of the Society of Powder Technology, Japan, 51(9), 614-622, 20140901
  109. A new method of zeta-potential measurement by the use of the sedimentation balance method, POWDER TECHNOLOGY, 237, 303-308, 201303
  110. Effect of packing fraction on indium tin oxide powder synthesis via a solid-phase reaction with microwave heating, CHEMICAL ENGINEERING SCIENCE, 98, 17-24, 20130719
  111. Effect of free air inflow method on fine particle classification of gas-cyclone, SEPARATION AND PURIFICATION TECHNOLOGY, 118, 670-679, 20131030
  112. Development of Synthesis Process of Nickel Oxide Powder by Microwave Denitration Method, 9th World Congress of Chemical Engineering (WCCE9), TuP-T3-187, 618, 20130818
  113. New method of zeta-potential measurement by use of the sedimentation balance method, FILTRATION & SEPARATION SYMPOSIUM in collaboration with INCHEM TOKYO 2013, O-26, 204, 20131031
  114. Synthesis of Functional Material Particles via a Solid-phase Reaction with Microwave Heating and Improvement of its Efficiency, Fine Chemicals, 42(12), 17-23, 201312
  115. Effect of conical length on separation performance of sub-micron particles by electrical hydro-cyclone, POWDER TECHNOLOGY, 219, 29-36, 201203
  116. Theoretical calculation of uncertainty region based on the general size distribution in the preparation of standard reference particles for particle size measurement, ADVANCED POWDER TECHNOLOGY, 23(2), 185-190, 201203
  117. ★, Mechanism of synthesis of metallic oxide powder from aqueous metallic nitrate solution by microwave denitration method, CHEMICAL ENGINEERING JOURNAL, 211, 1-8, 20121115
  118. Effect of Clean-air Injection through Porous Sintered Metal Cone on Classification Performance of Novel Cyclone, 5th Asian Particle Technology Symposium APT2012, 1-C, 099, 20120709
  119. Control of classification performance of novel cyclone with sintered metal by clean-air injection, 20th International Congress of Chemical and Process Engineering CHISA 2012, P1-35, 212, 20120825
  120. Classification Performance of Novel Hydro-cyclone with Porous Sintered Metal Cone, the Society of Powder Technology, Japan, 49(5), 367-373, 20120501
  121. Effects of clean-air injection on particle-separation performance of novel cyclone with sintered metal cone, SEPARATION AND PURIFICATION TECHNOLOGY, 80(2), 356-363, 20110729
  122. Classification of particles by centrifugal separator and analysis of the fluid behavior, ADVANCED POWDER TECHNOLOGY, 22(2), 294-299, 201103
  123. Separation of Unburned Carbon in Fly Ash Particles Using Special Louver Separator, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 44(3), 146-154, 2011
  124. Enhancement of the Classification Performance of Electrical Field-Flow Fractionation Using Horizontal Electrophoresis, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 44(6), 398-404, 2011
  125. Classification of Particles Dispersed by Bead Milling with Electrophoresis, KONA POWDER AND PARTICLE JOURNAL, 125-133, 2011
  126. Theoretical Calculation of Uncertainty Region Based on the General Size Distribution in the Preparation of Standard Reference Particles for Particle Size Measurement, Particultate Systems Analysis PSA-2011, 1-6, 20110905
  127. 制御流同伴型サイクロンの分離性能, Industrial Heating, 48(5), 37-41, 201105
  128. Improvement of Hydro-cyclone Performance by Use of Local Electrostatic Potential Field and Fluid Flow Control Method, the Society of Powder Technology, Japan, 48(8), 526-533, 20110825
  129. AFM investigation of the surface properties of silica particles dispersed by bead milling, COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 362(1-3), 97-101, 20100605
  130. Effect of apex cone shape on fine particle classification of gas-cyclone, POWDER TECHNOLOGY, 204(1), 54-62, 20101210
  131. Research and development appearance on mass production technology of MOX by microwave heating de-nitration, International Atomic Energy Agency (IAEA) Technical Meeting On Manufacturing Methods for Advanced Nuclear Fuel, TM-39468, 20100518
  132. Synthesis of ITO Powder by Microwave Heated Fluidized Bed Reactor, 13th Asia Pacific Confederation of Chemical Engineering Congress, 10063, 20101005
  133. Fundamental Study on the Microwave Heating Denitration Process for the Production of MOX Fuel, Core to Core Program, The 36th Seminar of Advanced Particle Handling Science, 20100217
  134. Mechanism of Microwave Heating Denitration Process for MOX Fuel Production, Core to Core 2010 World Network Seminar on Advanced Particle Science and Technology, 111-111, 20101123
  135. Classification of nanoparticles using electrical field flow fractionation, Core to Core 2010 World Network Seminar on Advanced Particle Science and Technology, 38-38, 20101123
  136. Synthesis of calcium phosphate hydrogel from waste incineration fly ash and bone powder, JOURNAL OF HAZARDOUS MATERIALS, 163(1), 391-395, 20090415
  137. Utilization of NaCl for phillipsite synthesis from fly ash by hydrothermal treatment with microwave heating, ADVANCED POWDER TECHNOLOGY, 20(1), 35-40, 200901
  138. Effect of inner structure of centrifugal separator on particle classification performance, POWDER TECHNOLOGY, 192(3), 268-272, 20090625
  139. Improvement of gas-cyclone performance by use of local fluid flow control method, POWDER TECHNOLOGY, 193(1), 6-14, 20090710
  140. Synthesis of calcium phosphate hydrogel from waste incineration fly ash and its application to fuel cell, JOURNAL OF ENVIRONMENTAL MANAGEMENT, 90(8), 2709-2714, 200906
  141. ★, Performance of fuel cell using calcium phosphate hydrogel membrane prepared from waste incineration fly ash and chicken bone powder, JOURNAL OF HAZARDOUS MATERIALS, 168(2-3), 1617-1621, 20090915
  142. Separation performance of sub-micron silica particles by electrical hydrocyclone, POWDER TECHNOLOGY, 196(2), 147-155, 20091210
  143. Continuous fine particle classification by water elutriator with applied electro-potential, ADVANCED POWDER TECHNOLOGY, 20(4), 398-405, 200907
  144. Synthesis of indium tin oxide powder by solid-phase reaction with microwave heating, ADVANCED POWDER TECHNOLOGY, 20(5), 488-492, 200909
  145. Classification of Particles Dispersed by Bead Milling Using Electrical Field-Flow Fractionation, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 42(10), 720-727, 2009
  146. Synthesis of Calcium Phosphate Hydrogel from Fly-Ash and Bone-Powder, 8th World Congress of Chemical Engineering, 2103-2103, 20090823
  147. Recent Research of Cut Size Control by Cyclones, The Fourth Asian Particle Technology Symposium (APT2009), 20-27, 20090914
  148. Effect of pH of fine silica suspension and central rod diameter on the cut size of an electrical hydrocyclone with and without underflow, SEPARATION AND PURIFICATION TECHNOLOGY, 63(2), 452-459, 20081022
  149. Effects of Pretreatments on Calcium Phosphate Hydrogel Synthesis from Waste Incineration Fly Ash, Journal of the Society of Powder Technology, Japan, 45(10), 684-689, 20081001
  150. 焼却飛灰・家畜骨粉の高プロトン電導性材料への再資源化とその利用, Chemical Industry, 59(7), 569-573, 20080701
  151. Effect of multi-inlet flow on particle classification performance of hydro-cyclones, POWDER TECHNOLOGY, 184(3), 352-360, 20080602
  152. Synthesis of Calcium Phosphate Hydrogel from Waste Incineration Fly Ash, KAGAKU KOGAKU RONBUNSHU, 34(2), 304-308, 200803
  153. Effect of Multi-Inlet Flow on Particle Classification Performance of Hydro-Cyclones and New Estimating Equation, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 41(8), 756-765, 200808
  154. Effect of Apex Cone and Secondary Flow Injection on Classification Performance of Dry-Cyclone, The Asian Particle Technology Symposium, B21, 20070901
  155. Effects of Microwave Irradiation on the Crystalline Phase of Zeolite Synthesized from Fly Ash by Hydrothermal Treatment, The Asian Particle Technology Symposium, P12, 20070903
  156. Experimental and Computational Study of Classification of Particles by Improved Centrifugal Separator, Journal of the Society of Powder Technology, Japan, 44(12), 861-867, 20071201
  157. Centrifugal Classification of Particles and Analysis of the Fluid Dynamics, Journal of the Society of Powder Technology, Japan, 44(5), 345-352, 20070501
  158. マイクロ波加熱を利用した水熱処理によるフライアッシュからのゼオライト合成, 実用産業情報, 9-13, 20071001
  159. Improvement of particle collection performance of dry-cyclone by use of local fluid flow control method, KAGAKU KOGAKU RONBUNSHU, 33(2), 92-100, 200703
  160. Effects of microwave irradiation on the crystalline phase of zeolite synthesized from fly ash by hydrothermal treatment, ADVANCED POWDER TECHNOLOGY, 18(4), 381-393, 200707
  161. Phillipsite Synthesis from Fly Ash Prepared by Hydrothermal Treatment with Microwave Heating, 5th World Congress on Particle Technology 2006, 84-C-84-C, 20060423
  162. Synthesis Rate of Zeolite from Incineration Ash by Hydrothermal Treatment Method, Journal of the Society of Powder Technology, Japan, 43(7), 500-506, 20060701
  163. Zeolite Synthesis from Fly Ash Prepared by Hydrothermal Treatment with Microwave Heating, Journal of the Society of Powder Technology, Japan, 43(10), 755-760, 20061001
  164. Particle Classification Performance of Hydro-cyclone with Forced-vortex Type, Journal of the Society of Powder Technology, Japan, 43(9), 666-675, 20060901
  165. Continuous Fine Particle Classification by Water-Elutriator with Applied Electro-potential, Journal of the Society of Powder Technology, Japan, 43(8), 550-558, 20060801
  166. Effect of NaOH Concentration on Zeolite Synthesis from Fly-ash with a Hydrothermal Treatment, KONA(Powder and Particle), 183-191, 20061001
  167. Fine particle classification with revised cyclone, 5th World Congress on Particle Technology 2006, 239-a, 20060423
  168. Effect of blade rotation on particle classification performance of hydro-cyclones, POWDER TECHNOLOGY, 164(2), 103-110, 20060517
  169. Particle separation performance by use of electrical hydro-cyclone, SEPARATION AND PURIFICATION TECHNOLOGY, 50(3), 330-335, 20060715
  170. Phillipsite synthesis from fly ash prepared by hydrothermal treatment with microwave heating, ADVANCED POWDER TECHNOLOGY, 17(4), 369-382, 2006
  171. Improvement in the Purity and Yield of Phillipsite Synthesized from Incineration Ash with Multi-stages Synthesis Method, Journal of the Society of Powder Technology, Japan, 42(1), 31-38, 20050101
  172. ゼオライト化による焼却灰の循環再利用, 36-43, 20050601
  173. Selective Synthesis of Phillipsite from Fly Ash and Rice Husk Ash Prepared by Hydrothermal Treatment, 7th World Congress of Chemical Engineering, C32-002, 384-384, 20050710
  174. Improvement in Classification Performance of Gas-cyclone by Local Fluid Velocity Control, Journal of the Society of Powder Technology, Japan, 42(6), 401-408, 20050601
  175. The effect of a new method of fluid flow control on submicron particle classification in gas-cyclones, POWDER TECHNOLOGY, 149(2-3), 139-147, 20050103
  176. A new method for the control of dilute suspension sedimentation by horizontal movement, POWDER TECHNOLOGY, 150(1), 9-19, 20050131
  177. Fly-Ash Classification with Revised Cyclone, The 6th International Symposium of Hot Gas Cleaning, 137-143, 2005
  178. Fine Particle Classification by Water Sieve with Electro-potential Applied to Flow, Filtration and Separation Symposium 2005, 26-30, 20051117
  179. Effect of Blade Rotation on Particle Classification Performance of Hydro-cyclone., The 43th Symposium of Powder Technology 2005, 11-17, 20051102
  180. Selective Synthesis of Phillipsite from Fly Ash and Rice Husk Ash Prepared by Hydrothermal Treatment, Journal of the Society of Powder Technology, Japan, 41(10), 738-744, 20041001
  181. Control of Particle Size and Crystallinity in Closed-Circuit Pulverization System, The 10th APCChE Congress, 2A-6-2A-6, 20041017
  182. Effect of Apex Cone on Particle Classification Performance of Cyclone Separator, Journal of the Chinese Institute of Chemical Engineers, 35(1), 41-46, 20040101
  183. Effect of inlet shape and slurry temperature on the classification performance of hydro-cyclones, POWDER TECHNOLOGY, 140(1-2), 1-9, 20040216
  184. Investigation about optimized dimensions of the detective tray for a sedimentation balance type particle size analyzer, JOURNAL OF THE CHINESE INSTITUTE OF CHEMICAL ENGINEERS, 35(1), 55-63, 200401
  185. Effects of initial slurry concentration distribution on the particle size distribution measured with a sedimentation balance method, ADVANCED POWDER TECHNOLOGY, 15(2), 181-200, 2004
  186. Control of Cut Size with Revised Cyclone, The 10th APCChE Congress, 2A-6, 20041217
  187. Effects of NaOH Concentration on Zeolite Synthesis from Fly Ash with a Hydrothermal Treatment Method, Journal of the Society of Powder Technology, Japan, 40(7), 497-504, 20030701
  188. Phillipsite Synthesis from Fly Ash and Rice Husk Ash Prepared by Hydrothermal Treatment, The 2nd Asian Particle Technology Symposium, 2, 263-268, 20031213
  189. Effect of Apex Cone Height on Particle Classification Performance of a Cyclone Separator, Advanced Powder Technology, 14(3), 263-278, 20030601
  190. Particle size measurement of standard reference particle candidates with improved size measurement devices, ADVANCED POWDER TECHNOLOGY, 14(1), 17-31, 200301
  191. Control of product particle size by closed-circuit pulverization system, KAGAKU KOGAKU RONBUNSHU, 29(2), 272-277, 200303
  192. Selective synthesis of phillipsite from fly ash of low silica content by hydrothermal treatment, KAGAKU KOGAKU RONBUNSHU, 29(2), 299-304, 200303
  193. Elaborate Control of Cut Size with Revised Dry Cyclone, The 2nd Asian Particle Technology Symposium, II, 305-311, 20031217
  194. Study of stabilizing conditions for closed-circuit pulverization system, KAGAKU KOGAKU RONBUNSHU, 28(1), 36-42, 200201
  195. Effect of fly ash content on zeolite synthesis from coal fly ash prepared by hydrothermal treatment, KAGAKU KOGAKU RONBUNSHU, 28(2), 155-160, 200203
  196. Influence of the behavior of particles and dispersion medium on the particle size measurement with the sedimentation balance method, KAGAKU KOGAKU RONBUNSHU, 28(2), 161-167, 200203
  197. Particle Classification with Improved Hydro-cyclone Separator, Journal of the Society of Powder Technology, Japan, 38(9), 626-632, 20010901
  198. Zeolite Synthesis from Coal Fly Ash Prepared by Hydrothermal Treatment Method and Effect of Particle Size in Its Reaction Mechanism, KONA Powder and Particle, 19, 232-239, 20011201
  199. Particle size measurement with an improved sedimentation balance method and microscopic method together with computer simulation of necessary sample size, ADVANCED POWDER TECHNOLOGY, 12(1), 79-94, 200101
  200. Particle separation by Iinoya's type gas cyclone, POWDER TECHNOLOGY, 118(1-2), 16-23, 20010808
  201. Fine control of cut size with dry cyclone, KAGAKU KOGAKU RONBUNSHU, 27(5), 574-580, 200109
  202. Classification of Fly Ash Using a Modified Louver-type Separator and Reduction of Unburned Carbon Amount, KONA(Powder and Particle), 221-229, 20001001
  203. Effect of inlet duct shape on particle separation performance of cyclone separator, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 33(2), 273-276, 200004
  204. Investigation about data reduction and sedimentation distance of sedimentation balance method, JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 33(3), 393-399, 200006
  205. Analysis of dynamic characteristics and optimum control in initial stage of closed-circuit pulverization system, KAGAKU KOGAKU RONBUNSHU, 26(5), 654-660, 200009
  206. Cut Size Control of Cyclone Separator and Numerical Simulation, The 9th International Comminution Research Association Workshop, 10-15, 20001210
  207. Automatic Measurement of Particle Size Distribution with Sedimentation Balance Method, The 1st Asian Particle Technology Symposium, 5-10, 20001213
  208. Zeolite Synthesis from Coal Fly Ash Prepared by Hydro-thermal Treatment Method and Effect of Particle Size on its Reaction Mechanism, Kagaku kogaku ronbunshu, 25(6), 987-992, 19990601
  209. Simulation of Dynamic Characteristics of Closed-circuit Pulverization System, Kagaku kogaku ronbunshu, 25(1), 59-65, 19990101
  210. Effect of Particle Properties on the Morphological Change Induced by Impaction against a Solid Surface for Tristearin Powder Mixed with Hard Particles, Advanced Powder Technology, 10(3), 295-313, 19990101
  211. Classification of Flyash Particles with a Modified Louver-type Separator and Reduction of Unburned Carbon Content, Journal of the Society of Powder Technology, Japan, 36(6), 454-461, 19990601
  212. 液相沈降法による粒度分布測定におけるデータ処理法, M&E, 11, 90-96, 19991101
  213. Data Reduction in Measurement of Size Distribution using Sedimentation Balance Method, Kagaku kogaku ronbunshu, 24(6), 928-933, 19980601
  214. Effect of Packing Structure on Separation Performance of Packed Bed, Kagaku kogaku ronbunshu, 24(1), 37-41, 19980101
  215. 粉体プロセスにおける微粒子の性状変化に関する研究, Journal of the Society of Powder Technology, Japan, 35(8), 603-605, 19980801
  216. The Effect of Particle Properties on the Morphological Change Induced by Impaction Against a Solid Surface for Tristearin Powder Mixed with Hard Particles, Journal of the Society of Powder Technology, Japan, 34(11), 840-849, 19971101
  217. The Effect of Environmental Temperature on the Compression Behavior of Tristearin Powder, Journal of the Society of Powder Technology, Japan, 34(7), 499-507, 19970701
  218. Morphological Change of Hardened Oil Particles Induced by Impaction against a Solid Surface, Aerosol Science and Technology, 26(4), 343-355, 19970401
  219. The Control of Particle Size Separation by the Use of a Hydrocyclone, Journal of the Society of Powder Technology, Japan, 34(9), 690-696, 19970901
  220. Particle Classification of a Louver-type Separator, Journal of the Society of Powder Technology, Japan, 34(9), 684-689, 19970901
  221. Three Dimensional Numerical Simulation in Cyclone Classifier Using Direct Method, Kagaku kogaku ronbunshu, 23(6), 885-891, 19970601
  222. Influence of Wall Properties on the Morphological Change of Sb2O3 Fine Particles Induced by Impaction against a Wall, Advanced Powder Technology, 6(3), 177-189, 19950301
  223. Morphological Change of Antimony Trioxide Fine Particles through Impaction, Compaction or Grinding, Journal of the Society of Powder Technology, Japan, 32(1), 23-30, 19950101
  224. Morphological Change of Hardened Oil Particles Induced by Impaction against a Wall, 14th Annual Meeting, American Association for Aerosol Research, 110-110, 19951009
  225. INDIUM TIN OXIDE THIN FILMS PREPARED BY CHEMICAL VAPOUR DEPOSITION, Thin Solid Films, 203, 297-302, 19910830
  226. ★, INDIUM-TIN OXIDE THIN-FILMS PREPARED BY CHEMICAL VAPOR-DEPOSITION, JOURNAL OF APPLIED PHYSICS, 70(7), 3848-3851, 19911001
  227. Fluorine-Doped Indium Oxide Thin Films Prepared by Chemical Vapor Deposition, Japanese Journal of Applied Physics, 29(9), 1705-1707, 19900901
  228. Influence of pulse-jet cleaning interval on performance of compact dust collector with pleated filter, SEPARATION AND PURIFICATION TECHNOLOGY, 279, 20211215
  229. Effect of ion species on change in particle electrophoresis caused by change in applied electric field, COLLOID AND INTERFACE SCIENCE COMMUNICATIONS, 43, 20210701
  230. Effects of Surface Finish of Nonwoven Fabric Bag Filters on Filter Efficiency, CHEMICAL ENGINEERING & TECHNOLOGY, 45(1), 92-99, 20220101

Publications such as books

  1. 2017/01, Multiphase Handbook 2nd Edition, Centrifugal separation: Dry cyclones, CRC Press, 2017, 01, Scholarly Book, Joint work, English, 978-1-4987-0100-6, 1394, 937-847
  2. 2013, はじめての集じん技術, はじめての集じん技術, 日刊工業新聞社, 2013, Scholarly Book, Joint work, 日本語
  3. 2013, 粉・粒体の構造制御、表面処理とプロセス設計, 粉・粒体の構造制御、表面処理とプロセス設計, 技術情報協会, 2013, Scholarly Book, Joint work, 日本語
  4. 2012, 粉体・微粒子のサイズリダクション(粉砕・分級)技術-最適化と操作ノウハウ, 粉体・微粒子のサイズリダクション(粉砕・分級)技術-最適化と操作ノウハウ, サイエンス&テクノロジー, 2012, Scholarly Book, Joint work, 日本語

Invited Lecture, Oral Presentation, Poster Presentation

  1. Influence of ambient conditions on the degradation of PPS filter media by NO2 gas at high temperature, Kunihiro Fukui, Genki Ichiba, Tomonori Fukasawa, Toru Ishigam, The 8th Asian Particle Technology Symposium (APT2021), 2021/10/14, With Invitation, English, Osaka, Japan
  2. Permeation of particles through microfiltration membrane: direct numerical simulation coordinated with FIB-SEM, Toru Ishigami, Mohammad Irwan Fatkhur Rozy, Yuto Maemoto, Masaki Ueda, Tomonori Fukasawa, Kunihiro Fukui, Mikio Sakai, Yasushi Mino, Kuniaki Gotoh, The 3rd International Symposium for Computational Particle Technology, 2021/11/18, Without Invitation, English
  3. Influence of Temperature and Gas Species on Degradation Behavior of PPS Filter Medium by Exposure to High Temperature Corrosive Gas, Kunihiro Fukui, 2nd Taiwan-Japan Workshop on Powder Processing Technology for High Quality Products, 2023/03/09, With Invitation, English, Taiwan Ceramic Society, Taipei
  4. Degradation of polyphenylene sulfide non-woven bag-filter media by HCl or NO2 gases at high temperature, Kunihiro Fukui, Genki Ichiba, Masaaki Yamada, Tomonori Fukasawa, Toru Ishigami, 7th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2022), 2022/11/16, Without Invitation, English, Fuji-Yoshida, Japan
  5. Evaluation of the reaction properties of Ca(OH)2 powder and CO2 at high temperature, Kunihiro Fukui, Ayaka Tamaru, Fandi Angga Prasetya, Tomonori Fukasawa, Toru Ishigami, The 9th Asian Particle Technology Symposium (APT2024), 2024/12/04, Without Invitation, English, Sydney, Australia
  6. Effects of dispersants and floc formation on yielding phenomena for concentrated silica slurry, Tomonori Fukasawa, Tatsuhiko Murakami, Mayuna Oka, Yuki Nishimura, Toru Ishigami, Kunihiro Fukui, The 9th Asian Particle Technology Symposium (APT2024), 2024/12/03, Without Invitation, English, Sydney, Australia
  7. Recovery of citric acid-soluble potassium components from biomass combustion bottom ash using both grinding and classification, Fandi Angga Prasetya, Sawa Ishizuka, Tomonori Fukasawa, Toru Ishigami, Kunihiro Fukui, The 9th Asian Particle Technology Symposium (APT2024), 2024/12/03, Without Invitation, English, Sydney, Australia
  8. Effective use of biomass powder combustion ash using pulverization and classification technologies, Kunihiro Fukui, 3rd Taiwan-Japan Workshop on Powder Processing Technology for High Quality Products, 2025/02/27, With Invitation, English, Taipei, Taiwan
  9. Unveiling filtration dynamics within a bagfilter: Direct numerical simulation coordinated X-ray computed tomography imaging, Toru Ishigami, Ayumu Seki, Mohammadreza Shirzadi, Tomonori Fukasawa, Kunihiro Fukui, 3rd Taiwan-Japan Workshop on Powder Processing Technology for High Quality Products, 2025/02/27, With Invitation, English, Taipei, Taiwan
  10. Water- and citric acid-solubilization of potassium components in biomass combustion ash by kaolin addition, Fandi Angga Prasetya, Sawa Ishizuka, Tomonori Fukasawa, Toru Ishigami, Kunihiro Fukui, 10th International Conference on Engineering for Waste and Biomass Valorisation, 2024/08/21, Without Invitation, English, Sendai, Japan
  11. Denitration characteristics of aqueous metal nitrate solution by microwave heating with carbon-containing alumina composite ceramic jacket, Segawa T, Kawaguchi K, Ishii K, Nagakawa G, Tamaru A, Fukasawa T, Ishigami T, and Fukui K, 7th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI2022), 2022/11/16, Without Invitation, English, Fuji-Yoshida, Japan
  12. High-resolution numerical simulation of particulate flow permeating through fibrous filter obtained from X-ray CT images, Toru Ishigami, Mohammad Irwan Fatkhur Rozy, Yuto Maemoto, Masaki Ueda, Tomonori Fukasawa, Kunihiro Fukui, Mikio Sakai, Yasushi Mino, Kuniaki Gotoh, 4th International Symposium on Multiscale Multiphase, 2022/09/27, Without Invitation, English, Berlin, Germany
  13. Principle of the cyclone classifier and its application to the recycling of biomass combustion ash as fertilizer, Kunihiro Fukui, International Guest Lecture of ITS, 2021/12/21, With Invitation, English, ITS
  14. Research on the improvement of particle size adjustment technology of dry recovered powder and the sintering density control, Tomoomi Segawa, Koichi Kawaguchi, Katsunori Ishii, Kazuya Yamamoto, Takayoshi Makino, Hidetoshi Iso, Tomonori Fukasawa, Kunihiro Fukui, NuMat 2020, 2020/10/26, Without Invitation, English, Ghent, Belgium
  15. Effects of heating conditions on the particle characteristics of uranium oxide powders synthesized from uranyl nitrate solutions via microwave heating, Tomoomi Segawa, Koichi Kawaguchi, Katsunori Ishii, Tomonori Fukasawa and Kunihiro Fukui, PACRIM13, 2019/10/28, Without Invitation, Japanese, Okinawa, Japan
  16. Effect of the temperature on the degradation of polyphenylene sulfide non-woven bag-filter media by NO2 gas with a continuous-flow exposure method, K. Fukui, K. Ito, M. I. F. Rozy, T. Fukasawa, T. Ishigami, FILTECH 2019, 2019/10/23, Without Invitation, Japanese, Cologne, Germany
  17. Direct numerical simulation of flow resistivity and oil droplet coalescence on x-ray ct images of nonwoven fabrics filters, Mohammad Irwan Fatkhur ROZY, Masaki UEDA, Tomonori FUKASAWA, Toru ISHIGAMI, Kunihiro FUKUI, APCChE 2019, 2019/09/26, Without Invitation, English, Sappro, Japan
  18. Electrophoretic classification based on differences in electrophoretic mobility caused by change in the applied electric field, Kosei ONO, Tomonori FUKASAWA, Toru ISHIGAMI, Kunihiro FUKUI, APCChE 2019, 2019/09/25, Without Invitation, English, Sapporo, Japan
  19. Evaluation of agglomeration and disruption for fine powder in vibrating fluidized bed, Tomonori FUKASAWA, Akihiro YAMANE, Toru ISHIGAMI, Kunihiro FUKUI, APCChE 2019, 2019/09/25, Without Invitation, English, Sapporo, Japan
  20. Technological development of the particle size adjustment of dry recovered powder, Tomoomi Segawa, Kazuya Yamamoto, Takayoshi Makino, Hidetoshi Iso, Koichi Kawaguchi, Katsunori Ishii, Hisato Sato, Tomonori Fukasawa, Kunihiro Fukui, Global 2019, 2019/09/23, Without Invitation, English, Seattle, USA
  21. Synthesis of Cu-Ce-Zr oxide catalyst nanoparticle by microwave denitration method, A.D. Karisma, R. Nakamura, T. Fukasawa, T. Ishigami, K. Fukui, ICCCI2018, 2018/07/11, Without Invitation, English, The Society of Powder Technology, Japan, Kurashiki, Japan
  22. Synthesis of potassium-type zeolite by reverse-micelle microwave method, T. Fukasawa, A. Horigome, A.D. Karisma, T. Ishigami, K. Fukui, ICCCI2018, 2018/07/11, Without Invitation, English, The Society of Powder Technology, Japan, Kurashiki, Japan
  23. Analysis of gelation characteristics of concentrated suspension by capillary force, T. Ishigami, K. Anzai, C. Tokishige, T. Fukasawa, K. Fukui, S. Kihara, ICCCI2018, 2018/07/10, Without Invitation, English, The Society of Powder Technology, Japan, Kurashiki, Japan
  24. Dependence of Chemical Components in Woody Biomass Combustion Ash on the Particle Size and Its Utilization for the Fertilizer, Kunihiro Fukui, Tomonori Fukasawa, Toru Ishigami, Norio Maeda, 8th World Congress on Particle Technology, 2018/04/25, Without Invitation, English, AIChE, Orlando, USA
  25. Development of the Performance Test Method for the Plug-in Type Pulse Jet Dust Collector, Kunihiro Fukui, Shogo Fujiwara, Mohammad Irwan Fatkhur Rozy, Tomonori Fukasawa, Toru Ishigami, Hisashi Kudou, Chikao Kanaoka, FILTECH2018, 2018/03/14, Without Invitation, English, FILTECH2018, Germany
  26. Experimental and Numerical Studies on the Effect of the Mass Loading on the Separation Efficiency of a Cyclone Separator, An-Ni Huang, Keiya Ito, Tomonori Fukasawa, Hsiu-Po Kuo, Kunihiro Fukui, 7th Asian Particle Technology Symposium (APT 2017), 2017/08/02, Without Invitation, English, 7th Asian Particle Technology Symposium (APT 2017), Taoyuan, Taiwan
  27. Existence form of Potassium Component in Woody Biomass Combustion Ash and Its Enrichment Method, Kunihiro Fukui, Norio Maeda, Tomonori Fukasawa, Takaaki Katakura, An-N Huang, 7th Asian Particle Technology Symposium (APT 2017), 2017/08/02, Without Invitation, English, 7th Asian Particle Technology Symposium (APT 2017), Taoyuan, Taiwan
  28. Utilization of Incineration Fly Ash from Biomass Power Plants for Zeolite Synthesis from Coal Fly Ash by Microwave Hydrothermal Treatment, Tomonori Fukasawa, Akira Horigome, Achmad Karisma, Norio Maeda, An-Ni Huang, Kunihiro Fukui, 7th Asian Particle Technology Symposium (APT 2017), 2017/07/31, Without Invitation, English, 7th Asian Particle Technology Symposium (APT 2017), Taoyuan, Taiwan
  29. NiCuZn-Ferrite Nanoparticle Synthesis from Metallic Nitrate Solution Using Microwave Denitration Method, Achmad Dwitama Karisma, Yoshihiro Shinokawa, Tomonori Fukasawa, An-Ni Huang, Kunihiro Fukui, 7th Asian Particle Technology Symposium (APT 2017), 2017/07/31, With Invitation, English, 7th Asian Particle Technology Symposium (APT 2017), Taoyuan, Taiwan
  30. Utilization of the Incineration Fly Ash from Biomass Power Plant for Zeolite Synthesis from Coal Fly Ash by Hydrothermal Treatment, Tomonori Fukasawa, Akira Horigome, Achmad Dwitama Karisma, Norio Maeda, An-Ni Huang, Kunihiro Fukui, ASCON-IEEChE 2016, 2016/11/15, Without Invitation, English, Yokohama
  31. Effects of the Flow Field of the Cyclone Inlet on its Separation Performance, An-Ni Huang, Daiki Shibata, Tomonori Fukasawa, Hideto Yoshida, Hsiu-Po Kuo, Kunihiro Fukui, ASCON-IEEChE 2016, 2016/11/15, Without Invitation, English, Yokohama
  32. Effects of Particle Properties on Agglomerate Formation of Fine Particles in Vibrating Fluidized Bed, Tomonori Fukasawa, Riho Hiraiwa, An-Ni Huang, Shih-Yang Huang, Hsiu-Po Kuo, Kunihiro Fukui, ASCON-IEEChE 2016, 2016/11/14, Without Invitation, English, Yokohama
  33. Application of Novel Cyclone with Sintered Metal Cone to Classification and Filtration, Kunihiro Fukui, Tomonori Fukasawa, Hideto Yoshida, 12th World Filtration Congress, 2016/04/13, With Invitation, English, Taipei
  34. Influence Of Heating Method On Size And Morphology Of Metallic Oxide Powder Synthesized From Metallic Nitrate Solution, T. Segawa, T. Fukasawa, Y. Yamada, M. Suzuki, H. Yoshida, K. Fukui, APCChE 2015, 2015/09/29, Without Invitation, English, Melbourne, Australia
  35. Effects of the Sintered Metal Cone Length on the Classification Performance of the Novel Gas Cyclone, T. Fukasawa, K. Fukui, S. Sunada, H. Yoshida, The 6th Asian Particle Technology Symposium (APT2015), 2015/09/16, Without Invitation, English, Seoul, Korea
  36. 微粒子プロセス,マイクロ波加熱の粒子合成・環境プロセスへの応用, Kunihiro Fukui, 平成26年度第3回マッチングフォーラム, 2015/03/27, With Invitation, Japanese, Hiroshima
  37. 大学および工業高等専門学校の化学工学教育の現状 -広島大学-, 福井国博, 化学工学会第80年会, 2015/03/21, With Invitation, Japanese, 化学工学会
  38. CUT SIZE CONTROL OF NOVEL GAS CYCLONE SEPARATOR WITH SINTERED METAL CONE BY CLEAN-AIR INJECTION, Kunihiro Fukui, Kenji Jikihara, Satoshi Sunada, Hideto Yoshida, FILTECH 2015, 2015/02/24, Without Invitation, English, Cologne, Germany
  39. Application of microwave heating to powder synthesis process, Taiwan-Japan Joint Seminar on Particle Technology, 2014/09/22, With Invitation, English, Taipei
  40. マイクロ波加熱と粉体プロセスを併用した機能性粒子の合成, Kunihiro Fukui, 第2回電子デバイス事業化フォーラム, 2014/08/09, With Invitation, Japanese, Fukuyama
  41. 廃棄物投下時等の粉じんの発生状況調査, Kunihiro Fukui, 平成25年度第1回廃棄物海面埋立管理技術会議, 2013/09/04, With Invitation, Japanese, Hiroshima
  42. マイクロ波照射を粉体プロセスに利用した材料合成とリサイクル, Kunihiro Fukui, 2013年度粉体工学会春期研究発表会, 2013/05/21, With Invitation, Japanese, Tokyo
  43. マイクロ波加熱脱硝における加熱特性に与える表面官能基の影響, Kunihiro Fukui, JAEA-大学合同研究会, 2013/02/28, With Invitation, Japanese, Tokyo
  44. マイクロ波加熱と粉体プロセスを併用した粒子合成プロセス, Kunihiro Fukui, 日本粉体工業技術協会 平成24年度第2回集じん分科会, 2012/12/18, With Invitation, Japanese, Hiroshima
  45. 電子レンジでチン!する材料合成とリサイクル, Kunihiro Fukui, 広島大学第42回東京イブニングセミナー, 2012/05/25, With Invitation, Japanese, Tokyo
  46. 金属硝酸塩混合水溶液からのマイクロ波脱硝およびマイクロ波焼結, Kunihiro Fukui, JAEA-大学合同研究会, 2012/02/20, With Invitation, Japanese, Tokyo
  47. 家畜骨粉のリン酸Caハイドロゲルへの再資源化と燃料電池への利用, Kunihiro Fukui, 第4回化学工学3支部合同福井大会, 2011/12/09, With Invitation, Japanese, Fukui
  48. 粉体プロセスとマイクロ波を併用した機能性粒子の合成, Kunihiro Fukui, (独)産業総合研究所中部センター講演会, 2011/03/29, With Invitation, Japanese, Nagoya
  49. 金属硝酸塩混合溶液のマイクロ波脱硝とカーボンを用いた脱硝体の特性制御, Kunihiro Fukui, JAEA-大学・産総研合同研究会, 2011/01/28, With Invitation, Japanese, Tokyo
  50. マイクロ波加熱の粉体プロセスへの利用, Kunihiro Fukui, 粉体工学会秋期研究発表会(2010年度), 2010/12/01, With Invitation, Japanese, Tokyo
  51. マイクロ波加熱流動化固相反応による機能性粒子の創製, Kunihiro Fukui, JST CIC東京新技術説明会, 2010/07/30, With Invitation, Japanese
  52. Fundamental Study on the Microwave Heating Denitration Process for the Production of MOX Fuel, Kunihiro Fukui, The 36th Seminar of Advanced Particle Handling Science, 2010/02/17, With Invitation, English, Kyoto
  53. 硝酸塩溶液からの酸化物粒子生成に与える加熱法の影響, Kunihiro Fukui, JAEA-大学・産総研合同研究会, 2010/01/22, With Invitation, Japanese, Tokyo
  54. 焼却灰・家畜骨粉の高プロトン電導性材料への再資源化法とその利用, Kunihiro Fukui, JST 広島大学新技術交流会, 2008/05/16, With Invitation, Japanese
  55. 焼却飛灰の再資源化とその利用, Kunihiro Fukui, 化学工学会 粉体プロセス分科会 セミナー「分離技術・環境技術の最前線」, 2007/11, With Invitation, Japanese, Tokyo
  56. 各種焼却灰の再資源化とその利用法, Kunihiro Fukui, 化学工学会中国四国支部若手の会 第1回中四国若手CE合宿討論会, 2007/09, With Invitation, Japanese, Hiroshima
  57. マイクロ波水熱処理によるフライアッシュからのフィリップサイト合成における海水の利用, Kunihiro Fukui, 財)ソルトサイエンス研究財団 第13回助成研究発表会, 2007/07, With Invitation, Japanese, Tokyo
  58. マイクロ波加熱と多段抽出を利用した新規水熱処理法によるフライアッシュを原料とする高純度ゼオライトの迅速合成, Kunihiro Fukui, (財)中部電力基礎技術研究所 第13回助成研究発表会, 2006/03, With Invitation, Japanese, Nagoya
  59. ゼオライト化による焼却灰の循環再利用, Kunihiro Fukui, 岡山地区化学工学懇話会 講習会(2005年度), 2005/02, With Invitation, Japanese, Okayama
  60. 籾殻と石炭灰から合成した高機能ゼオライト粉末, Kunihiro Fukui, 日本粉体工業技術協会 第2回分級ふるい分け分科会(2002年度), 2002/12, With Invitation, Japanese, Hiroshima
  61. 沈降天秤法による粒度分布測定法, Kunihiro Fukui, 粉体工学会 第2回エアロゾル操作部会(2001年度), 2001/12, With Invitation, Japanese, Hiroshima
  62. 粉体プロセスにおける微粒子の性状変化に関する研究, Kunihiro Fukui, 粉体工学会1999年度春期研究発表会, 1999/05, With Invitation, Japanese, Kyoto
  63. 粉体プロセスにおける微粒子の性状変化に関する研究, Kunihiro Fukui, 粉体工学会 第1回粉体操作に伴う諸現象に関する勉強会(1998年度), 1998/07, With Invitation, Japanese, Nagano
  64. 沈降天秤法による粒度分布測定におけるデータ処理, Kunihiro Fukui, 粉体工学会 第2回エアロゾル操作部会(1997年度), 1997/12, With Invitation, Japanese, Hiroshima