曙 紘之HIROYUKI AKEBONO

Last Updated :2024/05/07

所属・職名
大学院先進理工系科学研究科　教授
ホームページ
https://zaikyou.hiroshima-u.ac.jp/
メールアドレス
akebonohiroshima-u.ac.jp
自己紹介
私達の身の回りの機械・装置は時間と共に傷つき壊れます。永遠に壊れない物を作ることは難しいけれど，傷つきにくく壊れにくい物を作ることは可能です。それには 「モノが壊れる」仕組みを理解することが大切。私達はモノが傷つき壊れる仕組みを研究することで，より壊れにくい新材料開発を行なっています。またモノが壊れる寿命を正確に把握することで，機械・装置類の安全な運用・稼働を目指しています。

基本情報

学位

  • 博士（工学）　(慶應義塾大学)
  • 修士（工学）　(慶應義塾大学)

教育担当

  • 【学士課程】 工学部 : 第一類（機械・輸送・材料・エネルギー系） : 材料加工プログラム
  • 【博士課程前期】 先進理工系科学研究科 : 先進理工系科学専攻 : 機械工学プログラム
  • 【博士課程後期】 先進理工系科学研究科 : 先進理工系科学専攻 : 機械工学プログラム

研究分野

  • 工学 / 機械工学 / 機械材料・材料力学

所属学会

  • 日本機械学会
  • 日本材料学会
  • 軽金属学会
  • 溶接学会, 2020年
  • 自動車技術会, 2023年

教育活動

授業担当

  1. 2024年, 教養教育, ４ターム, Introduction to Mechanical Engineering
  2. 2024年, 教養教育, １ターム, 教養ゼミ
  3. 2024年, 学部専門, セメスター（後期）, 機械工学実験II
  4. 2024年, 学部専門, セメスター（後期）, 機械創成実習
  5. 2024年, 学部専門, ４ターム, 材料強度学
  6. 2024年, 学部専門, 通年, 卒業論文
  7. 2024年, 修士課程・博士課程前期, １ターム, 機械工学特別演習Ａ
  8. 2024年, 修士課程・博士課程前期, ２ターム, 機械工学特別演習Ａ
  9. 2024年, 修士課程・博士課程前期, ３ターム, 機械工学特別演習Ｂ
  10. 2024年, 修士課程・博士課程前期, ４ターム, 機械工学特別演習Ｂ
  11. 2024年, 修士課程・博士課程前期, 年度, 機械工学特別研究
  12. 2024年, 修士課程・博士課程前期, ３ターム, 材料複合工学特論
  13. 2024年, 博士課程・博士課程後期, 年度, 機械工学特別研究

研究活動

学術論文（★は代表的な論文）

  1. Estimation of the fatigue crack initiation site and life of Ti-6Al-4V alloy for two types of circle and slender crystal grains, International Journal of Fatigue, 181巻, pp. 108097, 20240401
  2. Molding and Structure Co-Analysis of Injection Molding Composites Considering Heterogeneity in the Thickness Direction, Materials Transactions, 65巻, 2号, pp. 184-193, 20240201
  3. Evaluation of fatigue properties of additively manufactured high-entropy alloys, Proceedings of 5th International Conference on Metal Material Processes and Manufacturing (ICMMPM2023), 202309
  4. Evaluation of fatigue properties of anodized Aluminum alloy A6061, Proceedings of International Conference on Advanced Technology in Experimental Mechanics (ATEM2023), 202310
  5. Elucidation of fatigue fracture mechanism on Glass Fiber Reinforced Plastics, Proceedings of International Conference on Advanced Surface Enhancement(INCASE2019), 202309
  6. Effect of pre-water immersion period on fatigue resistance of adhesive bonded thin steel, International Journal of Fatigue, 174巻, 20230901
  7. Quantitative Evaluation of Fatigue Crack inititaion on Ti-6Al-4V Alloy by Using Schmidt Factor, Proceedings of 14th International Conference on the Mechanical Behavior of Materials (ICM14), 202307
  8. 複合荷重を考慮した自動車用フレームの断面形状の検討について, 自動車技術会論文集, 54巻, 4号, pp. 738-744, 20230701
  9. Establishment of Fatigue Limit Diagrams for Stainless Steels Subjected to Excessive Deformation, Proceedings of The 6th International Conference on Materials and Reliability (ICMR2022), 202212
  10. Evaluation of Fatigue Life and Fatigue Limit for Structural Materials AISI 316, AISI 4140 and CA6NM via Machine Learning Approach, Proceedings of 2021 International Symposium on Structural Integrity (ISSI-2021), 202110
  11. 過大変形を受けたフェライト系ステンレス鋼における最大応力固定条件下での疲労限度線図, 材料, 2023
  12. Combined effect of surface morphology and residual stress induced by fine particle and shot peening on the fatigue limit of carburized steels, International Journal of Fatigue, 2023
  13. An evaluation of fatigue crack initiation in Ti–6Al–4V alloy by Schmid factor, Materials Science and Technology, 39巻, 5号, pp. 557-566, 202209
  14. Effect of fiber orientation on the fatigue crack initiation and propagation of glass fiber reinforced plastics, Journal of Applied Polymer Science, 20220000
  15. Comparison of the mechanical properties and mechanical damages to tendon tissue in three suspensory fixation techniques, Asia-Pacific Journal of Sports Medicine, Arthroscopy, Rehabilitation and Technology, 30巻, pp. 1-8, 20221001
  16. Analysis of Fatigue Crack Propagation Behavior of Structures with One-Sided Welding in Fillet Welded Joint for Load-Carrying Type, MATERIALS TRANSACTIONS, 63巻, 7号, 20220701
  17. Fatigue limit estimation for carburized steels with surface compressive residual stress considering residual stress relaxation, INTERNATIONAL JOURNAL OF FATIGUE, 2022
  18. Effect of Linear Weld Angle on Fatigue Strength of fai-Shaped Laser Welded Joints, MATERIALS TRANSACTIONS, 63巻, 4号, 20220401
  19. ピーニングにより形成された表面性状が浸炭焼入れ鋼の回転曲げ疲労特性に及ぼす影響, 砥粒加工学会誌, 66巻, 3号, 20220301
  20. Machine-Learning-based Investigation into the Effect of Defect/Inclusion on Fatigue Behavior in Steels, INTERNATIONAL JOURNAL OF FATIGUE, 155巻, 20220201
  21. Effects of Welding Defects on the Fatigue Properties of Spot Welded Automobile Steel Sheets and the Establishment of a Fatigue Life Evaluation Method, WELDING IN THE WORLD, 20220101
  22. Evaluation of fatigue life under block loading including cycles below the fatigue limit up to very high cycle regime, Proceedings of 8th International Conference on Very High Cycle Fatigue (VHCF8), 202107
  23. Evaluating the fatigue limit of metals having surface compressive residual stress and exhibiting shakedown, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 43巻, 2号, pp. 211-220, 202002
    DOIを用いた論文検索結果へのリンク
  24. Microstructural Characterization and Wear Behavior of Sintered Compacts Fabricated from Plasma-Nitrided Commercially Pure Titanium Powder, MATERIALS TRANSACTIONS, 2020
  25. Fatigue Crack Behavior on Thin Steel Sheets Welded by Friction Stir Spot Welding, Proceedings of Asia-Pacific Conference on Fracture and Strength 2020 (APCFS2020), 202011
  26. ガス浸炭焼入れを施したSCM420H鋼の回転曲げ疲労特性に及ぼす軟質微粒子ピーニングの影響, 鉄と鋼, 106巻, 10号, pp. 765-776, 202005
  27. Effect of Laser Patterning Preprocessing on Fatigue Strength of Adhesive Bonded Joints Using Thin Steel Plate, MATERIALS TRANSACTIONS, 61巻, 3号, pp. 469-474, 20200201
    DOIを用いた論文検索結果へのリンク
  28. Combined effects of low temperature nitriding and cold rolling on fatigue properties of commercially pure titanium, INTERNATIONAL JOURNAL OF FATIGUE, 139巻, pp. 105772, 202010
  29. Effect of Jig Constraint State during Welding Process on Fatigue Properties of Al/CFRP Dissimilar Welds and Fatigue Life Evaluation based on Singular Stress, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 202009
  30. Elucidation of fatigue characteristics and fracture mechanism of friction stir spot-welded tension–shear joint steels, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2020
  31. High-temperature bending fatigue properties of oxide dispersion-strengthened platinum-rhodium alloy under high axial stress, INTERNATIONAL JOURNAL OF FATIGUE, 132巻, 202003
    DOIを用いた論文検索結果へのリンク
  32. Cumulative fatigue damage of stress below the fatigue limit in weldment steel under block loading, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 43巻, 7号, pp. 1419-1435, 202007
  33. Life prediction of oxide dispersion-strengthened platinum–rhodium alloy subjected to high-temperature bending fatigue under axial stress, INTERNATIONAL JOURNAL OF FATIGUE, 140巻, pp. 105808, 202011
  34. Effectiveness of Ultrasonic Shot Peening on Stainless Cast Steel SCS6 Containing a Fatigue Crack, MATERIALS TRANSACTIONS, 61巻, 8号, pp. 1593-1599, 202006
    DOIを用いた論文検索結果へのリンク
  35. Effect of Shakedown on the Fatigue Limit of Ultrasonic Shot Peened Steel, Proceedings of InternationalInternational Conference on Advanced Surface Enhancement(INCASE2019), 201909
  36. Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy, SURFACE & COATINGS TECHNOLOGY, 359巻, pp. 476-484, 20190215
    DOIを用いた論文検索結果へのリンク
  37. Fatigue resistance of yttria-stabilized tetragonal zirconia polycrystal clasps for removable partial dentures, EUROPEAN JOURNAL OF ORAL SCIENCES, 127巻, 3号, pp. 269-275, 201906
    DOIを用いた論文検索結果へのリンク
  38. Finite-element analysis and optimization of the mechanical properties of polyetheretherketone (PEEK) clasps for removable partial dentures, JOURNAL OF PROSTHODONTIC RESEARCH, 2019
  39. Quantitative evaluation of small fatigue crack deflection behavior in metals based on T-stress, Proceedings of International Conference on Advanced Technology in Experimental Mechanics(ATEM2019), 201909
  40. The effects of microstructure on small fatigue crack initiation behavior in Ti-6Al-4V, Proceedings of International Conference on Advanced Technology in Experimental Mechanics(ATEM2019), 201909
  41. Characterization of surface layer formed by gas blow induction heating nitriding at different temperatures and its effect on the fatigue properties of titanium alloy, RESULTS IN MATERIALS, 2019
  42. Analysis evaluation study on the fatigue crack propagation behavior of the structures with one-sided welding of the fillet welded joint for load carrying type, Proceedings of International Conference on Advanced Technology in Experimental Mechanics(ATEM2019), 201910
  43. High temperature fatigue properties of Oxide-Dispersion-Strengthened platinum-10% rhodium alloy, PROCEDIA STRUCTURAL INTEGRITY, 20191101
  44. Evaluation of Fatigue Crack Initiation on Ti-6Al-4V Based on Schmid Factor, Proceedings of 2nd International Conference on Structural Integrity and Durability(ICSID2018), 201810
  45. Effect of Welding Parameters on Fatigue Strength of Joints Produced Friction Stir Spot Welding, Proceedings of 2nd International Conference on Structural Integrity and Durability(ICSID2018), 201810
  46. Improvement of the electrochemical characteristics of medium carbon steel using atmospheric-controlled induction-heating fine particle peening, SURFACE & COATINGS TECHNOLOGY, 354巻, pp. 76-82, 20181125
    DOIを用いた論文検索結果へのリンク
  47. Effect of high-amplitude loading on accumulated fatigue damage under variable-amplitude loading in 316 stainless steel, INTERNATIONAL JOURNAL OF FATIGUE, 116巻, pp. 388-395, 201811
    DOIを用いた論文検索結果へのリンク
  48. Effect of atmospheric-controlled induction-heating fine particle peening on electrochemical characteristics of austenitic stainless steel, SURFACE & COATINGS TECHNOLOGY, 334巻, pp. 189-195, 2018
    DOIを用いた論文検索結果へのリンク
  49. Effect of Cr Diffused Layer Formed by AIH-FPP Treatment on Adhesion of DLC Films to a Carbon Steel Substrate, MATERIALS TRANSACTIONS, 59巻, 4号, pp. 642-647, 2018
    DOIを用いた論文検索結果へのリンク
  50. Formation of commercially pure titanium with a bimodal nitrogen diffusion phase using plasma nitriding and spark plasma sintering, POWDER TECHNOLOGY, 330巻, pp. 349-356, 2018
    DOIを用いた論文検索結果へのリンク
  51. The Effects of Crystallographic Orientation on Fatigue Crack Initiation Behavior in Ti-6Al-4V, INTERNATIONAL JOURNAL OF FATIGUE, 117巻, pp. 371-383, 2018
  52. Effect of Welding Time on Fatigue Properties of Friction Stir Spot Welds of Al to Carbon Fibre-Reinforced Plasti, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 24巻, 3号, pp. 235-242, 2018
  53. Fatigue Life Estimation based on Fracture Mechanics of Single Spot Welded Joints under Different Loading Modes, ENGINEERING FRACTURE MECHANICS, 175巻, pp. 115-126, 2017
  54. Fatigue life prediction method for AISI 316 stainless steel under variable-amplitude loading considering low-amplitude loading below the endurance limit in the ultrahigh cycle regime, INTERNATIONAL JOURNAL OF FATIGUE, 101巻, pp. 18-26, 2017
  55. Effects of Gas Blow Velocity on the Surface Properties of Ti-6Al-4V Alloy Treated by Gas Blow IH Nitriding, MATERIALS TRANSACTIONS, 58巻, 8号, pp. 1155-1160, 2017
    DOIを用いた論文検索結果へのリンク
  56. Influence of substrate twisting on Young's modulus measured by four-point bending test for thermal barrier coatings, MECHANICAL ENGINEERING JOURNAL, 4巻, 2017
  57. Effects of Loading Mode on the Fatigue Behavior of Laser Welds in Automobile Mild Steel Sheet, WELDING IN THE WORLD, 60巻, 3号, pp. 535-545, 2016
  58. 荷重伝達型片側すみ肉溶接構造物における疲労き裂進展挙動の観察, 日本機械学会論文集, 82巻, 833号, pp. 15, 2016
  59. Formation of nitrided layer using atmospheric-controlled IH-FPP and its effect on the fatigue properties of Ti-6Al-4V alloy under four-point bending, PROCEDIA STRUCTURAL INTEGRITY, 2巻, pp. 3432-3438, 2016
  60. Effect of compression residual stress on fatigue properties of ASTM CA6NM stainless cast steel, PROCEDIA STRUCTURAL INTEGRITY, 2巻, pp. 3143-3149, 2016
  61. Surface Modification of Carbon Steel by Atmospheric-Controlled IH-FPP Treatment Using Mixed Chromium and High-Speed Steel Particles, MATERIALS TRANSACTIONS, 57巻, 10号, pp. 1801-1806, 2016
    DOIを用いた論文検索結果へのリンク
  62. Fatigue properties and fracture mechanism of load carrying type fillet joints with one-sided welding, FRATTURA ED INTEGRITA STRUTTURALE, 35号, pp. 424-433, 2016
    DOIを用いた論文検索結果へのリンク
  63. Effect of Plasma Discharging Condition on Growth Behavior of Nano-wire Formed on Tool Steel Substrate, ADVANCED EXPERIMENTAL MECHANICS, 1巻, pp. 237-241, 2016
  64. 真空置換AIH-FPP 処理システムを用いて表面窒化した工業用純チタンの表面特性評価, 砥粒加工学会誌, 59巻, 11号, pp. 643-648, 2016
  65. ステンレス鋳鋼水車ランナSCS6のニードルピーニングによる疲労き裂欠陥の無害化に関する検討, 日本機械学会論文集, 82巻, pp. 15-00469, 2016
  66. Fatigue Damage Evaluation of Friction Stir Spot Welded Cross-Tension Joints Under Repeated Two-Step Force Amplitudes, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24巻, 6号, pp. 2494-2502, 2015
    DOIを用いた論文検索結果へのリンク
  67. Cumulative fatigue damage evaluations on spot-welded joints using 590MPa-class automobile steel, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 38巻, 7号, pp. 870-879, 2015
    DOIを用いた論文検索結果へのリンク
  68. 円環圧縮試験法によるWC-Co溶射皮膜の割れ及びはく離強度評価, 日本機械学会論文集, 81巻, 822号, 2015
  69. ホットワイヤ・レーザ溶接による荷重非伝達型隅肉溶接継手の疲労特性評価, 日本機械学会論文集, 81巻, 828号, pp. 15, 20150801
  70. Fatigue strength of USP treated ASTM CA6NM for hydraulic turbine runner, SURFACE ENGINEERING, 30巻, 9号, pp. 662-669, 2014
    DOIを用いた論文検索結果へのリンク
  71. Effect of Ultrasonic Shot Peening on the Fatigue Strength of Stainless Cast Steel ASTM CA6NM for Hydraulic Turbine Runner, ADVANCED MATERIALS RESEARCH, 891巻, pp. 649-655, 2014
  72. Fatigue Fracture Mechanism on Friction Stir Spot Welded Joints Using 300 MPa-class Automobile Steel Sheets under Constant and Variable Force Amplitude, Procedia Materials Science, 3巻, pp. 537-543, 2014
  73. Effects of coating thickness and interfacial roughness on cracking and delamination strength of WC–Co coating measured by ring compression test, Materials Science and Engineering, 61巻, pp. 1-8, 2014
  74. ステンレス鋳鋼水車ランナSCS5の疲労強度特性に及ぼす平均応力および応力変動の影響評価, 日本機械学会論文集A編, 79巻, 799号, pp. 214-224, 2013
  75. 3-Dimensional observation of the interior fracture mechanism and establishment of cumulative fatigue damage evaluation on spot welded joints using 590 MPa-class steel, INTERNATIONAL JOURNAL OF FATIGUE, 51巻, pp. 121-131, 2013
    DOIを用いた論文検索結果へのリンク
  76. 通常及び高速CrMoめっき皮膜の高温摩擦・摩耗特性評価, 日本機械学会論文集A編, 79巻, 799号, pp. 225-238, 2013
  77. Durability evaluation of carbon steel AISI1045 coated diamond-like carbon film using atmospheric controlled IH-FPP system for pretreatment, SURFACE EFFECTS AND CONTACT MECHANICS XI, Vol.78巻, pp. pp.227-236, 2013
  78. 人工キャビテーション壊食を付与したステンレス鋳鋼水車ランナSCS5の疲労強度特性, 日本機械学会論文集(A編), 79巻, 807号, pp. 1620-1631, 2013
  79. 高Cr-Ni基合金INCONEL625材の壊食特性および疲労特性評価に基づく水車ランナ溶接補修材への適用に関する検討, 日本機械学会論文集A編, 78巻, 787号, pp. 265-277, 2012
  80. ステンレス鋳鋼水車ランナSCS5の疲労強度に及ぼすキャビテーション壊食による表面損傷の影響評価, 日本機械学会論文集A編, 78巻, 792号, pp. 1146-1156, 2012
  81. 590MPa級自動車用鋼板を母材とするスポット溶接継手における負荷荷重に基づく累積疲労損傷評価手法の確立, 日本機械学会論文集A編, 78巻, 787号, pp. 278-288, 2012
  82. Fatigue properties and fracture mechanism of steel coated with diamond-like carbon films, International Journal of Modern Physics C, 6巻, pp. 312-317, 2012
  83. Evaluation of Friction Properties of Amorphous SiC Film in Dry Air and Ar Environments at Reduced Pressures, 実験力学, 12巻, 3号, pp. 250-254, 2012
  84. 3-Dimensional Observation of Fatigue Crack Propagation on Spot Welded Joints using High Strength Steel, INTERNATIONAL JOURNAL OF AUTOMOTIVE ENGINEERING, 2巻, 3号, pp. 61-67, 2011
  85. The Influence of the Load Variation on Fatigue Strength of the Spot Welded Joint using the High Strength Stee, PROCEDIA ENGINEERING, 10巻, pp. 3413-3418, 2011
  86. 水車ランナ溶接補修材SUS309の疲労特性評および疲労き裂進展挙動の解明, 日本機械学会論文集A編, 77巻, 784号, pp. 2087-2097, 2011
  87. 水車ランナのSCS6鋼とSC49鋼の疲労き裂進展特性, 日本機械学会論文集A編, 77巻, 773号, pp. 108-115, 2011
  88. ステンレス鋳鋼SCS6水車ランナの疲労強度に及ぼす鋳造欠陥の影響評価, 日本機械学会論文集A編, 77巻, 778号, pp. 947-955, 2011
  89. プラズマ放電による合金鋼表面へのナノ・マイクロロッド状炭化物の形成, 日本金屬學會誌, 75巻, 12号, pp. 705-707, 2011
  90. 曲げ試験法によるガス窒化層の割れ強度評価, 表面技術, 61巻, 11号, pp. 768-772, 2010
  91. 普通鋳鋼SC49水車ランナの疲労強度に及ぼす鋳造欠陥の影響評価, 日本機械学会論文集A編, 76巻, 768号, pp. 1273-1281, 2010
  92. 高張力鋼のスポット溶接継手の三次元的疲労き裂進展挙動観察, 日本機械学会論文集A編, 76巻, 770号, pp. 1317-1323, 2010
  93. Fatigue properties and crack propagation behavior of stainless cast steel for turbine runner of hydraulic power generation, PROCEDIA ENGINEERING, 2巻, 1号, pp. 1273-1281, 2010
  94. 高疲労特性を有する自溶合金溶射部材作製のための有効な再溶融処理方法の提案, 日本機械学会論文集(A)編, 76巻, 760号, pp. 839-845, 2010
  95. Measurement of delamination energy of sputtered SiC film coated on tool steel substrate with conical precipitates by micro edge-indent method, Journal of JSEM, 10巻, pp. 141-145, 2010
  96. 絶縁皮膜層を有する軟磁性粉末冶金合金の微小疲労き裂進展特性, 材料, 53巻, 1号, pp. 853-859, 2009
  97. 白色層を含む鉄道車両用車輪踏面部応力に及ぼすすべりの影響に関するFEM解析, 材料, 58巻, 12号, pp. 1017-1022, 2009
  98. 発電水車用ステンレス鋳鋼SCS1の疲労強度に及ぼす鋳造欠陥の影響，および欠陥寸法に基づく疲労寿命評価, 日本機械学会論文集A編, 75巻, 759号, pp. 1585-1590, 2009
  99. Effect of coating microstructure on the fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy, INTERNATIONAL JOURNAL OF FATIGUE, 30巻, 5号, pp. 814-821, 2008
    DOIを用いた論文検索結果へのリンク
  100. 基板表面へのマイクロディンプル形成によるDLC膜被覆材料の摩擦係数制御, 表面技術, 59巻, 9号, pp. 621-626, 2008
  101. The Improvement of Tribological and Fatigue Properties of Casting Magnesium Alloy AZ91 performed Diamond Like Carbon Coating, Journal of Solid Mechanics and Materials Engineering, 2巻, 11号, pp. 1470-1477, 2008
  102. 疲労過程における自溶合金溶射皮膜のはく離挙動に関する考察, 日本機械学会論文集(A編), 73巻, 725号, pp. 96-101, 2007
  103. Ni基自溶合金溶射部材の疲労特性に影響を及ぼす微視組織因子について, 材料試験技術, 52巻, 1号, pp. 19-26, 2007
  104. テーラメイド表面改質による危機回避機能の発現～乗り上がり脱線回避車輪の創製～, 日本機械学会論文集(A編), 73巻, 727号, pp. 419-425, 2007
  105. DLC/高濃度浸炭複合表面改質SCM415における高疲労信頼性・高トライボロジ特性の発現, 表面技術, 58巻, 5号, pp. 311-316, 2007
  106. 積層DLC被膜によるAZ91マグネシウム合金の摩擦摩耗特性と疲労信頼性の改善, 軽金属, 57巻, 5号, pp. 197-202, 2007
  107. 超急速高周波焼入れとDLC被膜による複合表面改質鋼の摩擦摩耗特性および疲労特性, 日本機械学会論文集(A編), 73巻, 731号, pp. 803-807, 2007
  108. The Effect of coating thickness on fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 20巻, 25号, pp. 3599-3604, 2006
  109. DLC複合表面改質によるアルミニウム合金の摩耗特性と疲労特性の改善, 日本機械学会論文集(A編), 72巻, 719号, pp. 907-913, 2006
  110. 自溶合金溶射部材の疲労特性に及ぼす皮膜厚さの影響, 溶射, 40巻, 1号, pp. 12-16, 2005
  111. 自溶合金溶射部材の疲労特性に及ぼす再溶融処理時間の影響, 日本機械学会論文集(A編), 70巻, 694号, pp. 843-849, 2004
  112. 自溶合金溶射部材の疲労強度に及ぼす基材表面粗さの影響, 日本機械学会論文集(A編), 70巻, 700号, pp. 1709-1716, 2004
  113. Fatigue Properties of Friction Stir Welds of Treated Al to Carbon Fiber Reinforced Plastic, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 23巻, pp. 79-86, 2018
  114. Fatigue Resistance of Y-TZP Clasps for Removable Partial Dentures, Proceedings of International Congress of Dental Technology 2017, 2017
  115. Effects Of Treatment Temperature Of Gas Blow Ih Nitriding On Surface Characteristics And Fatigue Properties Of Titanium Alloy, Proceedings of 14th International Conference on Fracture, 2017
  116. Assessment of cumulative fatigue damage for AISI 316 below the fatigue limit under variable amplitude loading, Proceedings of The 4th China-Japan Joint Symposium on Fatigue of Engineering Materials and Structures, 2017
  117. Effects of Treatment Temperature and Gas Blow Velocity of IH Nitriding on Microstructure of Titanium Alloy, Proceedings of 44th International Conference on Metallurgical Coatings and Thin Films, 2017
  118. 300MPa級SPCCを母材とする十字引張型スポット溶接継手の三次元的内部疲労損傷挙動および疲労特性に及ぼす模擬溶接欠陥の影響, 自動車技術会論文集, 45巻, 5号, pp. 903-908, 201409
  119. Effect of surface compressive residual stress introduced by surface treatment on fatigue properties of metallic material, Proceedings of 12th International Fatigue Congress, 2018
  120. Fatigue properties of gas blow IH nitrided titanium alloy under four-point bending, Proceedings of The 4th China-Japan Joint Symposium on Fatigue of Engineering Materials and Structures, 2017
  121. Fatigue Properties Of Joints Produced Friction Stir Spot Welding, Proceedings of 14th International Conference on Fracture, 2017
  122. Formation of Commercially Pure Titanium with a Bimodal Nitrogen Diffusion Phase and Its Effect on the Tribological Properties, Proceedings of Wear of Materials 2017, 2017
  123. Influence of Specimen Twisting on Young's Modulus of Thermal Barrier Coatings Measured by Four-Point Bending Test, Proceedings of Asia-Pacific Conference on Fracture and Strength 2016, 2016
  124. Fatigue Life Estimation Method of SUS316 under Variable Amplitude Loading in Very High Cycle Regime, Proceedings of Asia-Pacific Conference on Fracture and Strength 2016, 2016
  125. Effect of compression Residual Stress on Fatigue Properties of Stainless Cast Steel, Proceedings of 21st European Conference on Fracture, 2016
  126. AFM Observation of Small Fatigue Crack Growth Behavior in extruded Mg-Alloy AZ31, Proceedings of International Conference on Advanced Technology in Experimental Mechanics, 2015
  127. Fatigue Properties and Fracture Mechanism of Load Carrying Type Fillet Joints with One-sided Welding, Proceedings of The 5th International Conference on Crack Paths, 2015
  128. Fatigue Properties of DLC Coated Steel AISI1045 with Cr Diffusion Layer on the Substrate Surface by AIH-FPP Process, Proceedings of 12th International Conference on the Mechanical Behavior of Materials, 2015
  129. Atomic Force Microscopy of Small Fatigue Crack Initiation and Growth Behavior in Ti-6Al-4V Alloy, Proceedings of The 2nd Japan-China Joint Symposium on Fatigue of Engineering Materials and Structure, 2014
  130. Evaluation of surface property of carbon steel treated by AIH-FPP using Cr particle, Proceedings of International Conference on Advanced Materials Development & Performance 2014, 2014
  131. Fatigue Fracture Mechanism on Friction Stir Spot Welded Joints Using 300 MPa-Class Automobile Steel Sheets under Constant and Variable Force Amplitude, Proceedings of 20th European Conference on Fracture, 2014
  132. Effect of Ultrasonic Shot Peening on the Fatigue Strength of Stainless Cast Steel ASTM CA6NM for Hydraulic Turbine Runner, Proceedings of 11th International Fatigue Congress, 2014
  133. Cracking and delamination strength of WC-Co sprayed coating measured by ring compression test, Proceedings of International Symposium on Interfacial Joining and Surface Technology, 2013
  134. 3-Dimensional Observation of the Interior Fatigue Fracture Mechanism on Friction Stir Spot Welded Using 300 MPa-Class Automobile Steel Sheets, Proceedings of International Joint Symposium on Joining and Welding, 2013
  135. Load Level Dependence on Fatigue Fracture Mode of Laser Welded 270MPa-class Automobile Steel Sheet, Proceedings of The 9th International Conference on Fracture and Strength of Solids, 2013
  136. Fatigue Properties and Crack Growth Behavior of Friction Stir Spot Welded 300 MPa-Class Automobile Steel Sheets, Proceedings of The 9th International Conference on Fracture and Strength of Solids, 2013
  137. Durability evaluation of carbon steel AISI1045 coated diamond-like carbon film using atmospheric controlled IH-FPP system for pretreatment, Proceedings of Contact and Surface 2013, 2013
  138. Influence of Specimen Twisting on Young's Modulus of Thermally Barrier Coating Measured by Four Point Bending Test, Proceedings of The 5th Asian Thermal Spray Conference, 2012
  139. Evaluation of the Cumulative Fatigue Damage on the Spot Welded Joints using 590 MPa-class Steel under Random Loading Conditions, Proceedings of 19th European Conference on Fracture, 2012
  140. Fatigue Strength Evaluation of Spot Welded Joints under Difference Loading Modes, Proceedings of 8th European Solid Mechanics Conference, 2012
  141. Effect of ultrasonic shot peening on the fatigue fracture strength of stainless cast steel JIS SCS6 for hydraulic turbine runner, Proceedings of Asian Pacific Conference on Fracture and Strength, 2012
  142. Fatigue Properties and Fracture Mechanism of Steel Coated with Diamond-like Carbon Films, Proceedings of The 2nd Japan-China Joint Symposium on Fatigue of Engineering Materials and Structure, 2011
  143. The Effect of Load Variation on Low Cycle Fatigue Characteristics of SUS316 for the Nuclear Power Generation, Proceedings of International Conference on Advanced Technology in Experimental Mechanics 2011, 2011
  144. Fatigue properties and fracture mechanism of steel coated with Diamond-like carbon films, Proceedings of 6th International Conference on Advanced Materials Development and Performance, 2011
  145. The Influence of the Load Variation on Fatigue Strength of the Spot Welded Joint using the High Strength Steel, Proceedings of 11th International Conference on the Mechanical Behavior of Materials, 2011
  146. Influence of Vacuum Pressure on Friction Coefficient of Sputtered SiC Film, Proceedings of The 5th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2010
  147. Fatigue Characteristics and Crack Propagation Behaviour on Spot Welded Joints using High Strength Steel, Proceedings of 18th European Conference on Fracture, 2010
  148. Fatigue Properties and Crack Propagation Behavior of Stainless Cast Steel for Turbine Runner of Hydraulic Power Generation, Proceedings of 10th International Fatigue Congress, 2010
  149. Improvement of Delamination Energy of Sputtered SiC Film by Forming Conical Precipitates at Interface, Proceedings of The 4th International Symposium on Advanced Fluid / Solid Science and Technology in Experimental Mechanics, 2009
  150. Fatigue Crack Growth Behavior of P/M Magnetic Material with a High-resistance Surface Layer, Proceedings of 12th International Conference on Fracture, 2009
  151. The control of friction coefficient of DLC coatings using micro-dimpled substrate, Proceedings of World Tribology Congress 2009, 2009
  152. The Improvement of Tribological and Fatigue Properties of Casting Magnesium Alloy AZ91 performed Diamond Like Carbon Coating, Proceedings of 2010 M&M international symposium for young researchers, 2008
  153. The Tribological and Fatigue Properties of Steel modified by Hybrid Surface Modification combining Super Rapid Induction Heating & Quenching and DLC coating, Proceedings of The 15th International Conference on Experimental Engineering and Sciences, 2008
  154. The Improvement of Tribological and Fatigue Properties of Aluminum Alloy coated DLC Hybrid Surface Modification, Proceedings of The 4th International Conference on Leading Edge Manufacturing in 21st Century, 2007
  155. The Effect of Coating Thickness on Fatigue Properties of Thermally Sprayed Steel with Ni-Based Self-Fluxing Alloy, Proceedings of Advanced Materials Development & Performance Conference 2005, 2005
  156. Fatigue Properties of Titanium Alloy, Stainless Steel and Aluminum Alloy Treated with Fine Particle Bombardment, Proceedings of 11th International Conference on Fracture, 2005
  157. Effect of Size of Coating Defect on Fatigue Properties of Steel Thermally Sprayed with Ni-Based Self-Fluxing Alloy, Proceedings of 11th International Conference on Fracture, 2005
  158. Effect of Surface Roughness of Substrate on Fatigue Strength of Thermally Sprayed Steel with Self-fluxing Alloy, Proceedings of 11th International Conference on Fracture, 2005
  159. The Effect of Fusing Time on Fatigue Properties of Thermally Sprayed Steel with Ni-based Self-fluxing Alloy, Proceedings of 12th International Conference on Experimental Mechanics, 2004
  160. Effect of Residual Stress on Fatigue Strength of Steel Modified by WPC Process, Proceedings of International Congress on Fracture 10, 2001

外部資金

競争的資金等の採択状況

  1. 公益財団法人泉科学技術振興財団2021年度研究助成, 元素拡散を援用した高耐久性自己潤滑薄膜成膜技術の開発, 2021年10月01日, 2022年09月30日
  2. 令和3年度内外いくえい会基金研究推進助成金, マイクロパターニングを援用した高強度・高耐久性を有する鉄鋼系接着接合技術の開発, 2021年06月01日, 2022年03月31日
  3. 公益財団法人スズキ財団一般科学技術研究助成金, 自動車用摺動部の高エネルギー効率化を達成する高耐久性固体潤滑薄膜の創製, 2021年04月01日, 2022年03月31日
  4. 一般財団法人先端加工機械技術振興協会研究助成, 微粒子投射による元素拡散加工を利用した高耐食性・高耐摩耗性金属材料の創製, 2021年01月01日, 2022年03月31日
  5. 公益財団法人天田財団一般研究開発助成[塑性加工], 金属微粒子による塑性加工を援用した金属拡散層形成と高機能金属材料の創製, 2020年10月01日, 2023年03月31日
  6. 公益財団法人古川技術振興財団研究助成, 元素拡散プロセスによる高圧水素貯蔵・輸送用金属素材の開発, 2020年04月01日, 2021年03月31日
  7. （公財）谷川熱技術振興基金, 高周波誘導加熱による元素拡散熱処理の開発, 2019年10月01日, 2020年09月30日
  8. 科学研究費助成事業(基盤研究(C)), 高強度高耐久性を有する革新的接合技術「環状溶接技術RSW」の開発, 2017年04月01日, 2020年03月31日
  9. 平成28年度（第33回）やまぎん地域企業助成基金, IHガスブローによる安定窒素拡散層を援用した高機能炭素鋼の創製, 2017年04月01日, 2018年03月31日
  10. (公財)東燃ゼネラル石油研究奨励財団　第35回研究奨励助成, 微粒子拡散ピーニングを前処理とした高機能自己潤滑硬質薄膜被覆鋼の創製, 2015年04月01日, 2016年03月31日
  11. (一社)日本チタン協会　2015年度チタン研究助成, 拡散ピーニングを援用したチタン合金表面への高機能窒化層の形成, 2015年04月01日, 2016年03月31日
  12. 科学研究費助成事業(若手研究(B)), 安定金属拡散層を援用した高耐久性フレキシブルカーボンコーティングの創製, 2014年, 2016年
    関連URL
  13. (公財)天田財団一般研究開発助成, レーザー溶接接合材の3次元的内部観察による劣化損傷機構に基づく高機能複合接合技術の開発, 2014年10月01日, 2016年03月31日
  14. (一社)日本アルミニウム協会アルミニウム研究助成, AIH-FPPによる安定金属拡散層を援用したアルミニウム合金表面へのカーボンコーティング適用技術の開発, 2014年04月01日, 2016年03月31日
  15. 科学研究費助成事業(若手研究(B)), cross-ply構造を利用した高密着力を有する炭素系硬質薄膜被覆部材の創製, 2010年, 2012年
    関連URL
  16. 第24回(2008年度)マツダ研究助成, 積層構造を利用した自己潤滑硬質被膜の極厚膜化技術による高機能被覆材料の開発, 2008年04月01日, 2010年03月31日
  17. (公財)スズキ財団平成19年度科学技術研究助成, マイクロディンプル形状による固体潤滑被膜Diamond Like Carbonの摩擦係数制御, 2008年04月01日, 2009年03月31日

社会活動

委員会等委員歴

  1. 疲労部門委員会幹事, 2022年05月, （公社）日本材料学会
  2. 疲労信頼性部門委員会, 2022年01月, （公社）自動車技術会
  3. 日本材料学会編集小委員会, 2019年, 日本材料学会
  4. 原子力委員会FQA3小委員会, 2017年04月, 2019年03月, 日本溶接協会
  5. 日本材料学会代議員, 2016年05月, 日本材料学会
  6. 日本材料学会中国支部職務幹事, 2016年04月, 日本材料学会
  7. 疲労部門委員会庶務幹事, 2016年01月, 2022年04月, 日本材料学会
  8. 原子力委員会FQA2小委員会, 2015年04月, 2017年03月, 日本溶接協会