HIROYUKI AKEBONO

Last Updated :2025/05/09

Affiliations, Positions
Graduate School of Advanced Science and Engineering, Professor
Web Site
https://zaikyou.hiroshima-u.ac.jp/
E-mail
akebonohiroshima-u.ac.jp
Self-introduction
Machines and devices in our daily lives get worn out and eventually break over time. While creating something that will never break is difficult, it is possible to create items that are more resistant to damage and less prone to breaking. To achieve this, it is crucial to understand the mechanisms behind "item failure." We conduct research on how items get damaged and broken, which helps us develop new materials that are more durable. Additionally, by accurately assessing the life of items until failure, we aim to ensure the safe operation of machines and devices.

Basic Information

Academic Degrees

  • Doctor of Engineering, Keio University
  • Master of Engineering, Keio University

Educational Activity

  • [Bachelor Degree Program] School of Engineering : Cluster 1(Mechanical Systems, Transportation, Material and Energy) : Program of Material Processing
  • [Master's Program] Graduate School of Advanced Science and Engineering : Division of Advanced Science and Engineering : Mechanical Engineering Program
  • [Doctoral Program] Graduate School of Advanced Science and Engineering : Division of Advanced Science and Engineering : Mechanical Engineering Program

Research Fields

  • Engineering;Mechanical engineering;Materials / Mechanics of materials

Affiliated Academic Societies

  • The Japan Society of Mechanical Engineers
  • The Society of Materials Science, Japan
  • The Japan Institutes ofLight Metal
  • Japan Welding Society, 2020
  • Society of Automotive Engineers of Japan, 2023

Educational Activity

Course in Charge

  1. 2025, Liberal Arts Education Program1, 4Term, Introduction to Mechanical Engineering
  2. 2025, Undergraduate Education, First Semester, Experiments in Mechanical Engineering I
  3. 2025, Undergraduate Education, Second Semester, Experiments in Mechanical Engineering II
  4. 2025, Undergraduate Education, Second Semester, Mechanical Engineering Design and Production
  5. 2025, Undergraduate Education, 4Term, Fracture Mechanics
  6. 2025, Undergraduate Education, Year, Graduation Thesis
  7. 2025, Graduate Education (Master's Program) , 1Term, Special Exercises on Mechanical Engineering A
  8. 2025, Graduate Education (Master's Program) , 2Term, Special Exercises on Mechanical Engineering A
  9. 2025, Graduate Education (Master's Program) , 3Term, Special Exercises on Mechanical Engineering B
  10. 2025, Graduate Education (Master's Program) , 4Term, Special Exercises on Mechanical Engineering B
  11. 2025, Graduate Education (Master's Program) , Year, Special Study on Mechanical Engineering
  12. 2025, Graduate Education (Master's Program) , 3Term, Advanced in Composite Science and Engineering
  13. 2025, Graduate Education (Doctoral Program) , Year, Special Study on Mechanical Engineering

Research Activities

Academic Papers

  1. Effects of elastic anisotropy on the small fatigue crack deflection behavior of alpha-brass, Journal of Materials Research and Technology, 35, 3170-3182, 202503
  2. Fatigue Design Recommendations for Anodised Aluminium Alloys A6061, Structural Integrity Procedia, 66, 161-166, 2024
  3. Effects of Defects and Shot Peening on Fatigue Properties of Additively Manufactured CoCrFeNiTiMo-Based High-Entropy Alloys, Journal of Materials Engineering and Performance, 33, 13916-13923, 202411
  4. Prediction of fatigue crack propagation behavior in elastic plastic region under block loading for type 316 steel via artificial neural network approach, International Journal of Fatigue, 192, 108725, 202503
  5. Elucidation of Fatigue Fracture Mechanism on Glass-Fiber-Reinforced-Plastics, Lecture Notes in Mechanical Engineering, 213-222, 202405
  6. Evaluation of Fatigue Properties of Additively Manufactured High-Entropy Alloys, Springer Proceedings in Materials, 44, 20-26, 202403
  7. Relationship between Weld Rip Diameter and Fatigue Fracture Mode for Friction Stir Spot Welded Tension-Peel Joints, Fatigue & Fracture of Engineering Materials & Structures, 47(6), 2127-2138, 202406
  8. Effect of Line Weld Angle on Fatigue Properties of Crossed Laser Spot Welding Joints, Materials Transactions, 65(5), 629-636, 202405
  9. Fatigue Limit Diagram for Ferritic Stainless Steels subjected to Excess Deformation under Fixed Maximum Stress Conditions, Materials Transactions, 65(5), 512-517, 202405
  10. Estimation of the fatigue crack initiation site and life of Ti-6Al-4V alloy for two types of circle and slender crystal grains, International Journal of Fatigue, 181, 108097, 20240401
  11. Molding and Structure Co-Analysis of Injection Molding Composites Considering Heterogeneity in the Thickness Direction, Materials Transactions, 65(2), 184-193, 20240201
  12. Evaluation of fatigue properties of additively manufactured high-entropy alloys, Proceedings of 5th International Conference on Metal Material Processes and Manufacturing (ICMMPM2023), 202309
  13. Evaluation of fatigue properties of anodized Aluminum alloy A6061, Proceedings of International Conference on Advanced Technology in Experimental Mechanics (ATEM2023), 202310
  14. Elucidation of fatigue fracture mechanism on Glass Fiber Reinforced Plastics, Proceedings of International Conference on Advanced Surface Enhancement(INCASE2019), 202309
  15. Effect of pre-water immersion period on fatigue resistance of adhesive bonded thin steel, International Journal of Fatigue, 174, 20230901
  16. Quantitative Evaluation of Fatigue Crack inititaion on Ti-6Al-4V Alloy by Using Schmidt Factor, Proceedings of 14th International Conference on the Mechanical Behavior of Materials (ICM14), 202307
  17. Study on the Cross-Section Shape for Automotive Frame on Multiple Axial Loads, 54(4), 738-744, 20230701
  18. Establishment of Fatigue Limit Diagrams for Stainless Steels Subjected to Excessive Deformation, Proceedings of The 6th International Conference on Materials and Reliability (ICMR2022), 202212
  19. Evaluation of Fatigue Life and Fatigue Limit for Structural Materials AISI 316, AISI 4140 and CA6NM via Machine Learning Approach, Proceedings of 2021 International Symposium on Structural Integrity (ISSI-2021), 202110
  20. Combined effect of surface morphology and residual stress induced by fine particle and shot peening on the fatigue limit of carburized steels, International Journal of Fatigue, 2023
  21. An evaluation of fatigue crack initiation in Ti–6Al–4V alloy by Schmid factor, Materials Science and Technology, 39(5), 557-566, 202209
  22. Effect of fiber orientation on the fatigue crack initiation and propagation of glass fiber reinforced plastics, Journal of Applied Polymer Science, 20220000
  23. Comparison of the mechanical properties and mechanical damages to tendon tissue in three suspensory fixation techniques, Asia-Pacific Journal of Sports Medicine, Arthroscopy, Rehabilitation and Technology, 30, 1-8, 20221001
  24. Analysis of Fatigue Crack Propagation Behavior of Structures with One-Sided Welding in Fillet Welded Joint for Load-Carrying Type, MATERIALS TRANSACTIONS, 63(7), 20220701
  25. Fatigue limit estimation for carburized steels with surface compressive residual stress considering residual stress relaxation, INTERNATIONAL JOURNAL OF FATIGUE, 2022
  26. Effect of Linear Weld Angle on Fatigue Strength of fai-Shaped Laser Welded Joints, MATERIALS TRANSACTIONS, 63(4), 20220401
  27. Machine-Learning-based Investigation into the Effect of Defect/Inclusion on Fatigue Behavior in Steels, INTERNATIONAL JOURNAL OF FATIGUE, 155, 20220201
  28. Effects of Welding Defects on the Fatigue Properties of Spot Welded Automobile Steel Sheets and the Establishment of a Fatigue Life Evaluation Method, WELDING IN THE WORLD, 20220101
  29. Evaluation of fatigue life under block loading including cycles below the fatigue limit up to very high cycle regime, Proceedings of 8th International Conference on Very High Cycle Fatigue (VHCF8), 202107
  30. Evaluating the fatigue limit of metals having surface compressive residual stress and exhibiting shakedown, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 43(2), 211-220, 202002
    Link to Paper Search Results by DOI
  31. Microstructural characterization and wear behavior of sintered compacts fabricated from plasma-nitrided commercially pure titanium powder, MATERIALS TRANSACTIONS, 2020
  32. Fatigue Crack Behavior on Thin Steel Sheets Welded by Friction Stir Spot Welding, Proceedings of Asia-Pacific Conference on Fracture and Strength 2020 (APCFS2020), 202011
  33. Effect of Soft-Fine Particle Peening on Rotating Bending Fatigue Properties of Gas Carburized SCM420H Steel, 106(10), 765-776, 202005
  34. Effect of Laser Patterning Preprocessing on Fatigue Strength of Adhesive Bonded Joints Using Thin Steel Plate, MATERIALS TRANSACTIONS, 61(3), 469-474, 20200201
    Link to Paper Search Results by DOI
  35. Combined effects of low temperature nitriding and cold rolling on fatigue properties of commercially pure titanium, INTERNATIONAL JOURNAL OF FATIGUE, 139, 105772, 202010
  36. Effect of Jig Constraint State during Welding Process on Fatigue Properties of Al/CFRP Dissimilar Welds and Fatigue Life Evaluation based on Singular Stress, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 202009
  37. Elucidation of fatigue characteristics and fracture mechanism of friction stir spot-welded tension–shear joint steels, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2020
  38. High-temperature bending fatigue properties of oxide dispersion-strengthened platinum-rhodium alloy under high axial stress, INTERNATIONAL JOURNAL OF FATIGUE, 132, 202003
    Link to Paper Search Results by DOI
  39. Cumulative fatigue damage of stress below the fatigue limit in weldment steel under block loading, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 43(7), 1419-1435, 202007
  40. Life prediction of oxide dispersion-strengthened platinum–rhodium alloy subjected to high-temperature bending fatigue under axial stress, INTERNATIONAL JOURNAL OF FATIGUE, 140, 105808, 202011
  41. Effectiveness of Ultrasonic Shot Peening on Stainless Cast Steel SCS6 Containing a Fatigue Crack, MATERIALS TRANSACTIONS, 61(8), 1593-1599, 202006
    Link to Paper Search Results by DOI
  42. Effect of Shakedown on the Fatigue Limit of Ultrasonic Shot Peened Steel, Proceedings of InternationalInternational Conference on Advanced Surface Enhancement(INCASE2019), 201909
  43. Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy, SURFACE & COATINGS TECHNOLOGY, 359, 476-484, 20190215
    Link to Paper Search Results by DOI
  44. Fatigue resistance of yttria-stabilized tetragonal zirconia polycrystal clasps for removable partial dentures, EUROPEAN JOURNAL OF ORAL SCIENCES, 127(3), 269-275, 201906
    Link to Paper Search Results by DOI
  45. Finite-element analysis and optimization of the mechanical properties of polyetheretherketone (PEEK) clasps for removable partial dentures, Journal of Prosthodontic Research, 2019
  46. Quantitative evaluation of small fatigue crack deflection behavior in metals based on T-stress, Proceedings of International Conference on Advanced Technology in Experimental Mechanics(ATEM2019), 201909
  47. The effects of microstructure on small fatigue crack initiation behavior in Ti-6Al-4V, Proceedings of International Conference on Advanced Technology in Experimental Mechanics(ATEM2019), 201909
  48. Characterization of surface layer formed by gas blow induction heating nitriding at different temperatures and its effect on the fatigue properties of titanium alloy, RESULTS IN MATERIALS, 2019
  49. Analysis evaluation study on the fatigue crack propagation behavior of the structures with one-sided welding of the fillet welded joint for load carrying type, Proceedings of International Conference on Advanced Technology in Experimental Mechanics(ATEM2019), 201910
  50. High temperature fatigue properties of Oxide-Dispersion-Strengthened platinum-10% rhodium alloy, PROCEDIA STRUCTURAL INTEGRITY, 20191101
  51. Evaluation of Fatigue Crack Initiation on Ti-6Al-4V Based on Schmid Factor, Proceedings of 2nd International Conference on Structural Integrity and Durability(ICSID2018), 201810
  52. Effect of Welding Parameters on Fatigue Strength of Joints Produced Friction Stir Spot Welding, Proceedings of 2nd International Conference on Structural Integrity and Durability(ICSID2018), 201810
  53. Improvement of the electrochemical characteristics of medium carbon steel using atmospheric-controlled induction-heating fine particle peening, SURFACE & COATINGS TECHNOLOGY, 354, 76-82, 20181125
    Link to Paper Search Results by DOI
  54. Effect of high-amplitude loading on accumulated fatigue damage under variable-amplitude loading in 316 stainless steel, INTERNATIONAL JOURNAL OF FATIGUE, 116, 388-395, 201811
    Link to Paper Search Results by DOI
  55. Effect of atmospheric-controlled induction-heating fine particle peening on electrochemical characteristics of austenitic stainless steel, SURFACE & COATINGS TECHNOLOGY, 334, 189-195, 2018
    Link to Paper Search Results by DOI
  56. Effect of Cr Diffused Layer Formed by AIH-FPP Treatment on Adhesion of DLC Films to a Carbon Steel Substrate, MATERIALS TRANSACTIONS, 59(4), 642-647, 2018
    Link to Paper Search Results by DOI
  57. Formation of commercially pure titanium with a bimodal nitrogen diffusion phase using plasma nitriding and spark plasma sintering, POWDER TECHNOLOGY, 330, 349-356, 2018
    Link to Paper Search Results by DOI
  58. The Effects of Crystallographic Orientation on Fatigue Crack Initiation Behavior in Ti-6Al-4V, INTERNATIONAL JOURNAL OF FATIGUE, 117, 371-383, 2018
  59. Effect of Welding Time on Fatigue Properties of Friction Stir Spot Welds of Al to Carbon Fibre-Reinforced Plasti, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 24(3), 235-242, 2018
  60. Fatigue Life Estimation based on Fracture Mechanics of Single Spot Welded Joints under Different Loading Modes, ENGINEERING FRACTURE MECHANICS, 175, 115-126, 2017
  61. Effects of Gas Blow Velocity on the Surface Properties of Ti-6Al-4V Alloy Treated by Gas Blow IH Nitriding, MATERIALS TRANSACTIONS, 58(8), 1155-1160, 2017
    Link to Paper Search Results by DOI
  62. Influence of substrate twisting on Young's modulus measured by four-point bending test for thermal barrier coatings, MECHANICAL ENGINEERING JOURNAL, 4, 2017
  63. Effects of Loading Mode on the Fatigue Behavior of Laser Welds in Automobile Mild Steel Sheet, WELDING IN THE WORLD, 60(3), 535-545, 2016
  64. Formation of nitrided layer using atmospheric-controlled IH-FPP and its effect on the fatigue properties of Ti-6Al-4V alloy under four-point bending, PROCEDIA STRUCTURAL INTEGRITY, 2, 3432-3438, 2016
  65. Effect of compression residual stress on fatigue properties of ASTM CA6NM stainless cast steel, PROCEDIA STRUCTURAL INTEGRITY, 2, 3143-3149, 2016
  66. Surface Modification of Carbon Steel by Atmospheric-Controlled IH-FPP Treatment Using Mixed Chromium and High-Speed Steel Particles, MATERIALS TRANSACTIONS, 57(10), 1801-1806, 2016
    Link to Paper Search Results by DOI
  67. Fatigue properties and fracture mechanism of load carrying type fillet joints with one-sided welding, FRATTURA ED INTEGRITA STRUTTURALE, 424-433, 2016
    Link to Paper Search Results by DOI
  68. Effect of Plasma Discharging Condition on Growth Behavior of Nano-wire Formed on Tool Steel Substrate, ADVANCED EXPERIMENTAL MECHANICS, 1, 237-241, 2016
  69. Fatigue Damage Evaluation of Friction Stir Spot Welded Cross-Tension Joints Under Repeated Two-Step Force Amplitudes, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24(6), 2494-2502, 2015
    Link to Paper Search Results by DOI
  70. Cumulative fatigue damage evaluations on spot-welded joints using 590MPa-class automobile steel, FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 38(7), 870-879, 2015
    Link to Paper Search Results by DOI
  71. Evaluation of cracking and delamination strength of thermally sprayed WC - Co coating by ring compression test method, 81(822), 2015
  72. Fatigue strength of USP treated ASTM CA6NM for hydraulic turbine runner, SURFACE ENGINEERING, 30(9), 662-669, 2014
    Link to Paper Search Results by DOI
  73. Effect of Ultrasonic Shot Peening on the Fatigue Strength of Stainless Cast Steel ASTM CA6NM for Hydraulic Turbine Runner, ADVANCED MATERIALS RESEARCH, 891, 649-655, 2014
  74. Fatigue Fracture Mechanism on Friction Stir Spot Welded Joints Using 300 MPa-class Automobile Steel Sheets under Constant and Variable Force Amplitude, Procedia Materials Science, 3, 537-543, 2014
  75. Effects of coating thickness and interfacial roughness on cracking and delamination strength of WC–Co coating measured by ring compression test, Materials Science and Engineering, 61, 1-8, 2014
  76. 3-Dimensional observation of the interior fracture mechanism and establishment of cumulative fatigue damage evaluation on spot welded joints using 590 MPa-class steel, INTERNATIONAL JOURNAL OF FATIGUE, 51, 121-131, 2013
    Link to Paper Search Results by DOI
  77. Durability evaluation of carbon steel AISI1045 coated diamond-like carbon film using atmospheric controlled IH-FPP system for pretreatment, SURFACE EFFECTS AND CONTACT MECHANICS XI, Vol.78, pp.227-236, 2013
  78. Evaluation of Fatigue Strength of Stainless Cast Steel SCS5 with Artificial Cavitation Erosion on for Hydraulic Turbine Runner, 79(807), 1620-1631, 2013
  79. Fatigue properties and fracture mechanism of steel coated with diamond-like carbon films, International Journal of Modern Physics C, 6, 312-317, 2012
  80. Evaluation of Friction Properties of Amorphous SiC Film in Dry Air and Ar Environments at Reduced Pressures, 12(3), 250-254, 2012
  81. 3-Dimensional Observation of Fatigue Crack Propagation on Spot Welded Joints using High Strength Steel, INTERNATIONAL JOURNAL OF AUTOMOTIVE ENGINEERING, 2(3), 61-67, 2011
  82. Precipitation of Nano-/Micro-Rod Shaped Carbide on Alloy Steel by Plasma Discharge, The Japan Institute of Metals, 75(12), 705-707, 2011
  83. Fatigue properties and crack propagation behavior of stainless cast steel for turbine runner of hydraulic power generation, PROCEDIA ENGINEERING, 2(1), 1273-1281, 2010
  84. Effective Fusing Method to Achieve Thermally Sprayed Steel with Ni−Based Self−Fluxing Alloy which Indicate High Fatigue Prepertie, 76(760), 839-845, 2010
  85. Measurement of delamination energy of sputtered SiC film coated on tool steel substrate with conical precipitates by micro edge-indent method, Journal of JSEM, 10, 141-145, 2010
  86. Effect of coating microstructure on the fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy, INTERNATIONAL JOURNAL OF FATIGUE, 30(5), 814-821, 2008
    Link to Paper Search Results by DOI
  87. The Effect of coating thickness on fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 20(25), 3599-3604, 2006
  88. Fatigue Properties of Friction Stir Welds of Treated Al to Carbon Fiber Reinforced Plastic, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 23, 79-86, 2018
  89. Fatigue Resistance of Y-TZP Clasps for Removable Partial Dentures, Proceedings of International Congress of Dental Technology 2017, 2017
  90. Effects Of Treatment Temperature Of Gas Blow Ih Nitriding On Surface Characteristics And Fatigue Properties Of Titanium Alloy, Proceedings of 14th International Conference on Fracture, 2017
  91. Assessment of cumulative fatigue damage for AISI 316 below the fatigue limit under variable amplitude loading, Proceedings of The 4th China-Japan Joint Symposium on Fatigue of Engineering Materials and Structures, 2017
  92. Effects of Treatment Temperature and Gas Blow Velocity of IH Nitriding on Microstructure of Titanium Alloy, Proceedings of 44th International Conference on Metallurgical Coatings and Thin Films, 2017
  93. Effect of surface compressive residual stress introduced by surface treatment on fatigue properties of metallic material, Proceedings of 12th International Fatigue Congress, 2018
  94. Fatigue properties of gas blow IH nitrided titanium alloy under four-point bending, Proceedings of The 4th China-Japan Joint Symposium on Fatigue of Engineering Materials and Structures, 2017
  95. Fatigue Properties Of Joints Produced Friction Stir Spot Welding, Proceedings of 14th International Conference on Fracture, 2017
  96. Formation of Commercially Pure Titanium with a Bimodal Nitrogen Diffusion Phase and Its Effect on the Tribological Properties, Proceedings of Wear of Materials 2017, 2017
  97. Influence of Specimen Twisting on Young's Modulus of Thermal Barrier Coatings Measured by Four-Point Bending Test, Proceedings of Asia-Pacific Conference on Fracture and Strength 2016, 2016
  98. Fatigue Life Estimation Method of SUS316 under Variable Amplitude Loading in Very High Cycle Regime, Proceedings of Asia-Pacific Conference on Fracture and Strength 2016, 2016
  99. Effect of compression Residual Stress on Fatigue Properties of Stainless Cast Steel, Proceedings of 21st European Conference on Fracture, 2016
  100. AFM Observation of Small Fatigue Crack Growth Behavior in extruded Mg-Alloy AZ31, Proceedings of International Conference on Advanced Technology in Experimental Mechanics, 2015
  101. Fatigue Properties and Fracture Mechanism of Load Carrying Type Fillet Joints with One-sided Welding, Proceedings of The 5th International Conference on Crack Paths, 2015
  102. Fatigue Properties of DLC Coated Steel AISI1045 with Cr Diffusion Layer on the Substrate Surface by AIH-FPP Process, Proceedings of 12th International Conference on the Mechanical Behavior of Materials, 2015
  103. Atomic Force Microscopy of Small Fatigue Crack Initiation and Growth Behavior in Ti-6Al-4V Alloy, Proceedings of The 2nd Japan-China Joint Symposium on Fatigue of Engineering Materials and Structure, 2014
  104. Evaluation of surface property of carbon steel treated by AIH-FPP using Cr particle, Proceedings of International Conference on Advanced Materials Development & Performance 2014, 2014
  105. Fatigue Fracture Mechanism on Friction Stir Spot Welded Joints Using 300 MPa-Class Automobile Steel Sheets under Constant and Variable Force Amplitude, Proceedings of 20th European Conference on Fracture, 2014
  106. Effect of Ultrasonic Shot Peening on the Fatigue Strength of Stainless Cast Steel ASTM CA6NM for Hydraulic Turbine Runner, Proceedings of 11th International Fatigue Congress, 2014
  107. Cracking and delamination strength of WC-Co sprayed coating measured by ring compression test, Proceedings of International Symposium on Interfacial Joining and Surface Technology, 2013
  108. 3-Dimensional Observation of the Interior Fatigue Fracture Mechanism on Friction Stir Spot Welded Using 300 MPa-Class Automobile Steel Sheets, Proceedings of International Joint Symposium on Joining and Welding, 2013
  109. Load Level Dependence on Fatigue Fracture Mode of Laser Welded 270MPa-class Automobile Steel Sheet, Proceedings of The 9th International Conference on Fracture and Strength of Solids, 2013
  110. Fatigue Properties and Crack Growth Behavior of Friction Stir Spot Welded 300 MPa-Class Automobile Steel Sheets, Proceedings of The 9th International Conference on Fracture and Strength of Solids, 2013
  111. Durability evaluation of carbon steel AISI1045 coated diamond-like carbon film using atmospheric controlled IH-FPP system for pretreatment, Proceedings of Contact and Surface 2013, 2013
  112. Influence of Specimen Twisting on Young's Modulus of Thermally Barrier Coating Measured by Four Point Bending Test, Proceedings of The 5th Asian Thermal Spray Conference, 2012
  113. Evaluation of the Cumulative Fatigue Damage on the Spot Welded Joints using 590 MPa-class Steel under Random Loading Conditions, Proceedings of 19th European Conference on Fracture, 2012
  114. Fatigue Strength Evaluation of Spot Welded Joints under Difference Loading Modes, Proceedings of 8th European Solid Mechanics Conference, 2012
  115. Effect of ultrasonic shot peening on the fatigue fracture strength of stainless cast steel JIS SCS6 for hydraulic turbine runner, Proceedings of Asian Pacific Conference on Fracture and Strength, 2012
  116. Fatigue Properties and Fracture Mechanism of Steel Coated with Diamond-like Carbon Films, Proceedings of The 2nd Japan-China Joint Symposium on Fatigue of Engineering Materials and Structure, 2011
  117. The Effect of Load Variation on Low Cycle Fatigue Characteristics of SUS316 for the Nuclear Power Generation, Proceedings of International Conference on Advanced Technology in Experimental Mechanics 2011, 2011
  118. Fatigue properties and fracture mechanism of steel coated with Diamond-like carbon films, Proceedings of 6th International Conference on Advanced Materials Development and Performance, 2011
  119. The Influence of the Load Variation on Fatigue Strength of the Spot Welded Joint using the High Strength Steel, Proceedings of 11th International Conference on the Mechanical Behavior of Materials, 2011
  120. Influence of Vacuum Pressure on Friction Coefficient of Sputtered SiC Film, Proceedings of The 5th International Symposium on Advanced Science and Technology in Experimental Mechanics, 2010
  121. Fatigue Characteristics and Crack Propagation Behaviour on Spot Welded Joints using High Strength Steel, Proceedings of 18th European Conference on Fracture, 2010
  122. Fatigue Properties and Crack Propagation Behavior of Stainless Cast Steel for Turbine Runner of Hydraulic Power Generation, Proceedings of 10th International Fatigue Congress, 2010
  123. Improvement of Delamination Energy of Sputtered SiC Film by Forming Conical Precipitates at Interface, Proceedings of The 4th International Symposium on Advanced Fluid / Solid Science and Technology in Experimental Mechanics, 2009
  124. Fatigue Crack Growth Behavior of P/M Magnetic Material with a High-resistance Surface Layer, Proceedings of 12th International Conference on Fracture, 2009
  125. The control of friction coefficient of DLC coatings using micro-dimpled substrate, Proceedings of World Tribology Congress 2009, 2009
  126. The Improvement of Tribological and Fatigue Properties of Casting Magnesium Alloy AZ91 performed Diamond Like Carbon Coating, Proceedings of 2010 M&M international symposium for young researchers, 2008
  127. The Tribological and Fatigue Properties of Steel modified by Hybrid Surface Modification combining Super Rapid Induction Heating & Quenching and DLC coating, Proceedings of The 15th International Conference on Experimental Engineering and Sciences, 2008
  128. The Improvement of Tribological and Fatigue Properties of Aluminum Alloy coated DLC Hybrid Surface Modification, Proceedings of The 4th International Conference on Leading Edge Manufacturing in 21st Century, 2007
  129. The Effect of Coating Thickness on Fatigue Properties of Thermally Sprayed Steel with Ni-Based Self-Fluxing Alloy, Proceedings of Advanced Materials Development & Performance Conference 2005, 2005
  130. Fatigue Properties of Titanium Alloy, Stainless Steel and Aluminum Alloy Treated with Fine Particle Bombardment, Proceedings of 11th International Conference on Fracture, 2005
  131. Effect of Size of Coating Defect on Fatigue Properties of Steel Thermally Sprayed with Ni-Based Self-Fluxing Alloy, Proceedings of 11th International Conference on Fracture, 2005
  132. Effect of Surface Roughness of Substrate on Fatigue Strength of Thermally Sprayed Steel with Self-fluxing Alloy, Proceedings of 11th International Conference on Fracture, 2005
  133. The Effect of Fusing Time on Fatigue Properties of Thermally Sprayed Steel with Ni-based Self-fluxing Alloy, Proceedings of 12th International Conference on Experimental Mechanics, 2004
  134. Effect of Residual Stress on Fatigue Strength of Steel Modified by WPC Process, Proceedings of International Congress on Fracture 10, 2001

External Funds

Acceptance Results of Competitive Funds

  1. 2023/04/01, 2026/03/31
  2. 2021/06/01, 2022/03/31