NASER KHAJI

Last Updated :2024/02/01

Affiliations, Positions
Graduate School of Advanced Science and Engineering, Associate Professor
E-mail
nkhajihiroshima-u.ac.jp
Self-introduction
My background in Japan came back to 1998 when I started my Ph.D. study at the Department of Civil Engineering, the University of Tokyo. In 2019, I came back to Japan to begin a new career at Hiroshima University. I received my B.Eng. and M.Eng. degrees from the University of Tehran (Iran) and Tarbiat Modares University (Iran) in 1995 and 1998, respectively. After my graduation from the University of Tokyo in 2001, I joined Tarbiat Modares University, where I was promoted to full professorship in 2013. My research interests include health monitoring of various infrastructures, soil-structure-fluid interaction, computational structural dynamics and seismic wave propagation, inverse problems in structural dynamics and earthquake engineering, numerical methods in computational mechanics, and seismic hazard analysis.

Basic Information

Educational Backgrounds

  • The University of Tokyo, Japan, 1998/10, 2001/09
  • Tarbiat Modares University, Iran, 1995/09, 1998/05
  • University of Tehran, Iran, 1990/09, 1995/04

Academic Degrees

  • Master (Science), Tarbiat Modares University
  • Doctor of Engineering, The University of Tokyo

Educational Activity

  • [Bachelor Degree Program] School of Engineering : Cluster 4(Civil Engineering and Architecture) : Program of Civil and Environmental Engineering
  • [Master's Program] Graduate School of Advanced Science and Engineering : Division of Advanced Science and Engineering : Civil and Environmental Engineering Program
  • [Doctoral Program] Graduate School of Advanced Science and Engineering : Division of Advanced Science and Engineering : Civil and Environmental Engineering Program

Research Fields

  • Complex systems;Social / Safety system science;Natural disaster / Disaster prevention science
  • Informatics;Human informatics;Soft computing
  • Informatics;Computing Technologies;High performance computing

Educational Activity

Course in Charge

  1. 2023, Undergraduate Education, 3Term, Structural Mechanics
  2. 2023, Undergraduate Education, Intensive, Exercises in Algorithm
  3. 2023, Undergraduate Education, 1Term, Energy Method for Structural Analysis
  4. 2023, Undergraduate Education, 3Term, Bridge and Earthquake-resistance
  5. 2023, Undergraduate Education, 3Term, Design of Infrastructures
  6. 2023, Graduate Education (Master's Program) , 1Term, Special Exercises on Civil and Environmental Engineering A
  7. 2023, Graduate Education (Master's Program) , 2Term, Special Exercises on Civil and Environmental Engineering A
  8. 2023, Graduate Education (Master's Program) , 3Term, Special Exercises on Civil and Environmental Engineering B
  9. 2023, Graduate Education (Master's Program) , 4Term, Special Exercises on Civil and Environmental Engineering B
  10. 2023, Graduate Education (Master's Program) , Academic Year, Special Study on Civil and Environmental Engineering
  11. 2023, Graduate Education (Master's Program) , 2Term, Advanced Structural Engineering
  12. 2023, Graduate Education (Master's Program) , 4Term, Management of Natural Disasters
  13. 2023, Graduate Education (Doctoral Program) , Academic Year, Special Study on Civil and Environmental Engineering

Research Activities

Academic Papers

  1. Displacement pattern in a functionally graded transversely isotropic, half-space due to dislocation, Numerical Methods in Civil Engineering, 7(2), 42-49, 202204
  2. A new algorithm for shape parameter optimization in the multiquadric method for bending beam and elastic plane BVPs, ARCHIVE OF APPLIED MECHANICS, 92(11), 3109-3125, 202211
  3. Torsion vibration of foundation in a functionally graded transversely isotropic, linearly elastic half-space, Forces in Mechanics, 7, 100082, 202205
  4. A multi-objective optimization framework for seismic resilience enhancement of typical existing RC buildings, Journal of Building Engineering, 52, 104361, 202207
  5. Wave propagation analysis of micropolar elastic beams using a novel micropolar wave finite element method, Mechanics of Advanced Materials and Structures, 28, 551-567, 202103
  6. Impedance functions of rigid rectangular foundations bonded on layered transversely isotropic elastic/poroelastic half-space, Engineering Analysis with Boundary Elements, 138, 423-438, 202205
  7. A unified approach for stress wave propagation in transversely isotropic elastic and poroelastic layered media, Soil Dynamics and Earthquake Engineering, 157, 107152, 202207
  8. An efficient method for dam-reservoir seismic interaction analysis, Engineering Journal of Amirkabir, 13(50), 86-94, 200205
  9. Split-node technique for modeling of discontinuities in a continuum body (in Persian), Journal of Modares Technical and Engineering, 15(1), 37-49, 200405
  10. A new method for numerical modeling of crustal deformations, part one: theory (in Persian), Journal of Modares Technical and Engineering, 19(1), 13-30, 200505
  11. A new method for numerical modeling of crustal deformations, part two: application (in Persian), Journal of Modares Technical and Engineering, 19(1), 31-51, 200505
  12. An inverse method for dynamic properties identification of 2D- and 3D-shear frames (in Persian), Research Bulletin of Seismology and Earthquake Engineering, 9(3), 2-15, 200611
  13. Analysis of topographic amplification effects on canyon sites using 3D boundary element method, Journal of Seismology and Earthquake Engineering, 9(1), 25-37, 200705
  14. Evaluation of wave-diffraction forces on a submerged sphere using a hybrid BE-FE method (in Persian), Journal of Hydraulics, 4(1), 23-37, 200802
  15. Damage detection of truss bridge joints using artificial neural networks, Expert Systems with Applications, 35(3), 1122-1131, 200810
  16. A coupled BE–FE study for evaluation of seismically isolated cylindrical liquid storage tanks considering fluid-structure interaction, Journal of Fluids and Structures, 25(3), 567-585, 200904
  17. Use of Ritz method for damage detection of reinforced and post-tensioned concrete beams, Construction and Building Materials, 23(6), 2167-2176, 200906
  18. Modeling transient elastodynamic problems using spectral element method, Asian Journal of Civil Engineering, 10(4), 361-380, 200908
  19. Closed-form solutions for crack detection problem of Timoshenko beams with various boundary conditions, International Journal of Mechanical Sciences, 51(9-10), 667-681, 200909
  20. Soil-structure interaction (SSI) analysis using a hybrid spectral element/finite element (SE/FE) approach, Journal of Seismology and Earthquake Engineering, 11(2), 83-95, 200909
  21. Seismic rehabilitation of masonry arch bridges using post-tensioning method (in Persian), Journal of Transportation Engineering, 1(2), 1-19, 201002
  22. Green's function operator matrix of intraplate faults (in Persian), Journal of the Earth and Space Physics, 36(1), 59-69, 201004
  23. On the seismic behavior of cylindrical base-isolated liquid storage tanks excited by long-period ground motions, Soil Dynamics and Earthquake Engineering, 30(10), 968-980, 201010
  24. System identification of concrete gravity dams using artificial neural networks based on a hybrid FE-BE approach, Engineering Structures, 32(11), 3583-3591, 201011
  25. Health monitoring of cracked cantilever beams using artificial neural networks considering nonlinear crack behavior (in Persian), Modares Civil Engineering Journal, 10(3), 105-118, 201011
  26. A dual reciprocity BEM approach using new Fourier radial basis functions applied to 2D elastodynamic transient analysis, Engineering Analysis with Boundary Elements, 35(1), 85-95, 201101
  27. Model updating of multistory shear buildings for simultaneous identification of mass, stiffness and damping matrices using two different soft-computing methods, Expert Systems with Applications, 38(5), 5320-5329, 201105
  28. First kind Bessel function (J-Bessel) as radial basis function for plane dynamic analysis using dual reciprocity boundary element method, Acta Mechanica, 218(3-4), 247-258, 201105
  29. A new semi-analytical method with diagonal coefficient matrices for potential problems, Engineering Analysis with Boundary Elements, 35(6), 845-854, 201106
  30. Analytical solutions for free and forced vibrations of a multiple cracked Timoshenko beam subject to a concentrated moving load, Acta Mechanica, 221(1-2), 79-97, 201109
  31. A hybrid distinct element–boundary element approach for seismic analysis of cracked concrete gravity dam–reservoir systems, Soil Dynamics and Earthquake Engineering, 31(10), 1347-1356, 201110
  32. Analysis of elastostatic problems using a semi-analytical method with diagonal coefficient matrices, Engineering Analysis with Boundary Elements, 35(12), 1288-1296, 201112
  33. A new bond-slip model for adhesive in CFRP-steel composite systems, Engineering Structures, 34(1), 447-454, 201201
  34. Simulation of strong ground motion in northern Iran using the specific barrier model, Geophysical Journal International, 188(2), 645-679, 201202
  35. Modeling transient elastodynamic problems using a novel semi-analytical method yielding decoupled partial differential equations, Computer Methods in Applied Mechanics and Engineering, 213(1), 183-195, 201203
  36. Detection of a through-thickness crack based on elastic wave scattering in plates, Part I: Forward Solution, Asian Journal of Civil Engineering, 13(3), 301-318, 201206
  37. Detection of a through-thickness crack based on elastic wave scattering in plates, Part II: Inverse Solution, Asian Journal of Civil Engineering, 13(4), 433-454, 201208
  38. Seismic analysis of baffled liquid storage tanks using boundary element method (in Persian), Modares Civil Engineering Journal, 12(2), 11-22, 201208
  39. A semi-analytical method with a system of decoupled ordinary differential equations for three-dimensional elastostatic problems, International Journal of Solids and Structures, 49(18), 2528-2546, 201209
  40. Application of genetic algorithm in crack detection of beam-like structures using a new cracked Euler–Bernoulli beam element, Applied Soft Computing, 13(2), 867-880, 201302
  41. New complex Fourier shape functions for the analysis of two-dimensional potential problems using boundary element method, Engineering Analysis with Boundary Elements, 37(2), 260-272, 201302
  42. Evaluation of canyon site effects on seismic waves (in Persian), Modares Civil Engineering Journal, 13(1), 53-66, 201305
  43. Frequency domain analysis of elastic bounded domains using a new semi-analytical method, Acta Mechanica, 224(7), 1555-1570, 201307
  44. Analysis of free and forced vibrations problems using the dual reciprocity boundary element method based on inverse multiquadric radial basis functions (in Persian), Journal of Computational Methods in Engineering, 32(1), 51-64, 201308
  45. Parameter estimation in hysteretic systems based on adaptive least-squares, Journal of Information Systems and Telecommunication, 1(4), 217-221, 201310
  46. Decoupled equations method for solving two-dimensional elastodynamic problems in the frequency domain (in Persian), Sharif Journal of Civil Engineering, 30(3), 65-74, 201411
  47. Cavity/inclusion detection in plane linear elastic bodies using linear sampling method, Journal of Nondestructive Evaluation, 33(1), 93-103, 201403
  48. Crack detection in a beam with an arbitrary number of transverse cracks using genetic algorithms, Journal of Mechanical Science and Technology, 28(3), 823-836, 201403
  49. New Timoshenko-cracked beam element and crack detection in beam-like structures using genetic algorithm, Inverse Problems in Science and Engineering, 22(3), 359-382, 201405
  50. Simulation of two-dimensional elastodynamic problems using a new adaptive physics-based method, Meccanica, 49(6), 1353-1366, 201406
  51. Dynamic analysis of plane elasticity with new complex Fourier radial basis functions in the dual reciprocity boundary element method, Applied Mathematical Modelling, 38(14), 3641-3651, 201407
  52. Cavity detection in a heat conductor using linear sampling method, Heat and Mass Transfer, 50(7), 973-984, 201407
  53. Seismic analysis of rectangular alluvial valleys subjected to incident SV waves by using the spectral finite element method, International Journal of Civil Engineering, 12(3), 439-451, 201407
  54. Wave propagation in semi-infinite media with topographical irregularities using Decoupled Equations Method, Soil Dynamics and Earthquake Engineering, 65(1), 102-112, 201410
  55. New damage indices and algorithm based on square time-frequency distribution for damage detection in concrete piers of railroad bridges, Structural Control and Health Monitoring, 22(1), 91-106, 201501
  56. Identification of linear and non-linear physical parameters of multistory shear buildings using artificial neural network, Inverse Problems in Science and Engineering, 23(4), 670-687, 201505
  57. Time domain linear sampling method for qualitative identification of buried cavities from elastodynamic over-determined boundary data, Computers and Structures, 153(1), 36-48, 201506
  58. Development of decoupled equations methods for calculating hydrodynamic pressures on concrete gravity dams (in Persian), Modares Civil Engineering Journal, 15(1), 41-52, 201508
  59. Development of decoupled equations method to calculate J-integral in linear elastic fracture mechanics problems (in Persian), Modares Mechanical Engineering, 15(9), 59-68, 201511
  60. Development and application of a semi-analytical method with diagonal coefficient matrices for analysis of wave diffraction around vertical cylinders of arbitrary cross-sections, Ocean Engineering, 110(1), 292-302, 201512
  61. An adaptive physics-based method for the solution of one-dimensional wave motion problems, Civil Engineering Infrastructures Journal, 48(2), 217-234, 201512
  62. Damage identification of cracks in structures via extended finite element method and particle swarm optimization (in Persian), Modares Civil Engineering Journal, 16(5), 177-189, 201602
  63. A new global nonreflecting boundary condition with diagonal coefficient matrices for analysis of unbounded media, Applied Mathematical Modelling, 40(4), 2845-2874, 201602
  64. Determination of stress intensity factors of 2D fracture mechanics problems through a new semi-analytical method, Fatigue & Fracture of Engineering Materials & Structures, 39(4), 467-478, 201604
  65. A novel stochastic-spectral finite element method for analysis of elastodynamic problems in the time domain, Meccanica, 51(4), 893-920, 201604
  66. Determination of critical excitation for MDOF systems based on displacement target function and energy constraint (in Persian), Bulletin of Earthquake Science and Engineering, 3(1), 17-28, 201605
  67. Vibration-based damage identification of masonry walls using distinct element modeling (in Persian), Modares Civil Engineering Journal, 17(1), 203-215, 201606
  68. Seismic response of base-isolated high-rise buildings under long-period ground motions (in Persian), Modares Civil Engineering Journal, 16(2), 41-52, 201607
  69. Determination of slippage field of strike-slip faults using inverse solution methods (in Persian), Journal of the Earth and Space Physics, 42(2), 233-245, 201608
  70. Adaptive dynamic surface control of Bouc–Wen hysteretic systems, Journal of Dynamic Systems, Measurement, and Control, Transactions of the ASME, 138(9), 091007-(7 pages), 201609
  71. Development of higher-order stochastic spectral finite element method for uncertainty analysis of 2D continua (in Persian), Modares Mechanical Engineering, 16(7), 51-60, 201610
  72. Spectral finite element simulation of seismic wave propagation and fault dislocation in elastic media, Asian Journal of Civil Engineering, 17(8), 1189-1213, 201612
  73. Development of a new semi-analytical method in fracture mechanics problems based on energy release rate, Acta Mechanica, 227(12), 3529-3547, 201612
  74. Graph theoretical methods for efficient stochastic finite element analysis of regular structures, Computers and Structures, 178(1), 29-46, 201701
  75. An analytical method for crack detection of Timoshenko beams with multiple open cracks using a test mass, European Journal of Environmental and Civil Engineering, 21(1), 24-41, 201701
  76. Stress wave propagation modelling in one-dimensional micropolar rods using a new Wave Finite Element Method (in Persian), Modares Mechanical Engineering, 17(5), 405-412, 201708
  77. Estimation of coefficients of Williams' series in LEFM problems using decoupled equations method (in Persian), Sharif Journal of Civil Engineering, 33(2), 87-97, 201708
  78. A Monte Carlo adapted finite element method for dislocation simulation of faults with uncertain geometry, Journal of Earth System Science, 126(7), 1-22, 201710
  79. Application of scaled boundary finite element method in topographic effects on seismic waves (in Persian), Journal of Modeling in Engineering, 15(1), 161-174, 201707
  80. Uncertainty analysis of elastostatic problems incorporating a new hybrid stochastic-spectral finite element method, Mechanics of Advanced Materials and Structures, 24(12), 1030-1042, 201712
  81. Modification of specific barrier model using new time functions for inclined fault, Journal of Seismology and Earthquake Engineering, 19(3), 189-205, 201707
  82. Identification of multiple flaws in 2D structures using dynamic extended spectral finite element method with a universally enhanced meta-heuristic optimizer, Structural and Multidisciplinary Optimization, 57(2), 605-623, 201802
  83. Stress wave propagation analysis in one-dimensional micropolar rods with variable cross-section using Micropolar Wave Finite Element Method, International Journal of Applied Mechanics, 10(4), 1850039-(28 pages), 201805
  84. Modification of specific barrier model for faulting modeling by using of new time functions based on site position and fault geometry (in Persian), Journal of the Earth and Space Physics, 44(1), 21-38, 201805
  85. Development of a new semi-analytical approach for 2D analysis of crack propagation problems, Fatigue & Fracture of Engineering Materials & Structures, 41(6), 1344-1363, 201806
  86. Simulation of Laquila earthquake using specific barrier model (in Persian), Modares Civil Engineering Journal, 18(2), 101-112, 201807
  87. An analytical method for crack detection of beams with uncertain boundary conditions by a concentrated test mass, Civil Engineering Journal, 4(7), 1629-1645, 201807
  88. Complex Fourier element shape functions for analysis of 2D static and transient dynamic problems using dual reciprocity boundary element method, Engineering Analysis with Boundary Elements, 95(1), 222-237, 201810
  89. A stochastic spectral finite element method for wave propagation analyses with medium uncertainties, Applied Mathematical Modelling, 63(1), 84-108, 201811
  90. A new approach for determination of threshold parameter in the spectral decomposition regularization method (in Persian), Bulletin of Earthquake Science and Engineering, 6(1), 13-22, 201904
  91. A stochastic spectral finite element method for solution of faulting-induced wave propagation in materially random continua without explicitly modeled discontinuities, Computational Mechanics, 64, 1017-1048, 2019
  92. Generation of synthetic accelerograms using a probabilistic critical excitation method based on energy constraint, Earthquakes and Structures, 18, 45-56, 2020
  93. An adaptive cellular automata approach with the use of radial basis functions for the simulation of elastic wave propagation, Acta Mechanica, 231, 2723-2740, 2020
  94. Decoupled scaled boundary finite element method for analysing dam-reservoir dynamic interaction, International Journal of Computer Mathematics, 97, 1725-1743, 2020
  95. Rocking forced displacement of a rigid disc embedded in a functionally graded transversely isotropic half-space, Mathematics and Mechanics of Solids, 26, 1029-1052, 202107
  96. A modified specific barrier model based on new time functions and approach for cracks location on the fault plane: application to the 2008 Iwate-Miyagi earthquake, Geophysical Journal International, 227, 76-98, 20211001
  97. Analysis of elastic pulse dispersion in periodically layered composite rods using Wave Finite Element Method, International Journal of Applied Mechanics, 13, 2150050, 20210601
  98. An anisotropic multi-scale method for slipping dislocations, INTERNATIONAL JOURNAL OF PLASTICITY, 148, 202201

Publications such as books

  1. 2019, Principles of Engineering Seismology and Seismic Hazard Analysis, 3rd Edition (in Persian), Tarbiat Modares University Press, Tehran, Iran, 2019, 978-600-5394-82-5, 295
  2. 2017, Principles of Engineering Seismology and Seismic Hazard Analysis, 2nd Edition (in Persian), Tarbiat Modares University Press, Tehran, Iran, 2017, 978-600-5394-82-5, 295
  3. 2013, Principles of Engineering Seismology and Seismic Hazard Analysis (in Persian), Tarbiat Modares University Press, Tehran, Iran, 2013, 978-600-5394-82-5, 295

Invited Lecture, Oral Presentation, Poster Presentation

  1. Wave propagation analysis of micropolar elastic beams using a novel micropolar wave finite element method, 1st International Conference on Sustainable Structures (ICSUST1) & First Symposium of the Junior Editorial Board of SUST (SJEBS1), 2022, With Invitation, English, Nanjing Forestry University, Nanjing, China
  2. Seismic vulnerability mitigation strategies for buildings in urban areas: a case study of Tehran, Iran, 75th Anniversary of Civil Engineering Bachelor Program Civil Engineering in the Face of Catastrophic Phenomena due to Climate Change, 2022, With Invitation, English, University of Guanajuato, Guanajuato, Mexico
  3. A multi-occurrence seismic hazard life-cycle cost retrofit optimization framework for RC refinery infrastructures, Omidian, Pedran; Khaji, Naser, 6th International Reliability and Safety Engineering Conference, 2021, Without Invitation, English, Shiraz, Iran
  4. Displacement of a rigid disc embedded in a functionally graded transversely isotropic half-space, Kalantari M, Khaji N, Eskandari-Ghadi M, 7th International Conference on Civil, Architectural, and Environmental Sciences, 2020, Without Invitation, English, Berlin, Germany
  5. An anisotropic multi-scale method for modeling wave propagation, Forghani S, Khaji N, 12th National Congress on Civil Engineering, 2020, With Invitation, English, Tabriz, Iran
  6. Retrofit optimization for resilience enhancement of office buildings in the refinery sites under seismic scenarios, Omidian P, Khaji N, 12th National Congress on Civil Engineering, 2020, Without Invitation, English, Tabriz, Iran
  7. Prediction of remaining fatigue life of steel bridges along with a time-schedule for the fatigue damage inspection (in Persian), Dehghan M, Rahai A, Khaji N, 3rd International Conference on Applied Research in Structural Engineering and Construction Management, 2019, Without Invitation, other, Tehran, Iran
  8. A stochastic model for generating artificial accelerograms of long-period earthquakes (in Persian), Eslambolchi S, Khaji N, 11th National Congress on Civil Engineering, 2019, Without Invitation, other, Shiraz, Iran
  9. A semi-analytical method for solving the inverse problem of determination of fault plane’s dislocation (in Persian), Kalantari M, Khaji N, 11th National Congress on Civil Engineering, 2019, Without Invitation, other, Shiraz, Iran
  10. Evaluation of seismic isolator’s parameters on the behavior of isolated elevated liquid storage tanks (in Persian), Farajollahi S, Khaji N, 9th National and 3rd International Conference of Steel & Structure, 2018, Without Invitation, other, Tehran, Iran
  11. On the effect of staging stiffness on the seismic behavior of isolated elevated liquid storage tanks (in Persian), Farajollahi S, Khaji N, International Conference on Civil Engineering, Architecture and Urban Management in Iran, 2018, Without Invitation, other, Tehran, Iran
  12. Development of fragility curves of base-isolated liquid storage tanks subjected to long-period earthquakes (in Persian), Saei Nezami E, Khaji N, Alembagheri M, 11th International Congress on Civil Engineering, 2018, Without Invitation, other, Tehran, Iran
  13. A numerical strategy for solution of wave propagation in random media, Zakian P, Khaji N, 11th International Congress on Civil Engineering, 2018, Without Invitation, English, Tehran, Iran
  14. A modified specific barrier model for simulation of strong ground motion caused by seismic wave propagation of active inclined faults (in Persian), Rezaei MH, Khaji N, 11th International Congress on Civil Engineering, 2018, Without Invitation, other, Tehran, Iran
  15. A modified specific barrier model for simulation of strong ground motion caused by seismic wave propagation of active faults (in Persian), Rezaei MH, Khaji N, 10th National Congress on Civil Engineering, 2017, Without Invitation, other, Tehran, Iran
  16. Vibration behavior analysis of base-isolated liquid storage tanks subjected to long-period earthquakes using critical excitation method (in Persian), Ahmadi A, Khaji N, 10th National Congress on Civil Engineering, 2017, Without Invitation, other, Tehran, Iran
  17. Evaluation of modal pushover analysis with updating load pattern for irregular bridges subjected to long-period earthquakes (in Persian), Abbasi A, Khaji N, 10th National Congress on Civil Engineering, 2017, Without Invitation, other, Tehran, Iran
  18. Seismic analysis of high-rise steel moment frames with setbacks subjected to near-fault earthquakes (in Persian), Hakimi M, Khaji N, 10th National Congress on Civil Engineering, 2017, Without Invitation, other, Tehran, Iran
  19. Monte-Carlo simulation of finite element analysis of fault dislocation with random length (in Persian), Zakian P, Khaji N, 10th National Congress on Civil Engineering, 2017, Without Invitation, other, Tehran, Iran
  20. A new approach for stochastic analysis of cyclically symmetric structures, Zakian P, Khaji N, 3rd International Conference on Structural Engineering, 2017, Without Invitation, English, Tehran, Iran
  21. Determination of slippage field of Mw7.1 Hector-mine 1999 earthquake using Green’s function spectral decomposition method (in Persian), Torkanloo E, Khaji N, 9th National Congress on Civil Engineering, 2016, Without Invitation, other, Mashhad, Iran
  22. A new nonreflecting open boundary condition for circular cavities in unbounded domain, Mirzajani M, Khaji N, 9th National Congress on Civil Engineering, 2016, Without Invitation, English, Mashhad, Iran
  23. A feasibility study on prediction of the source location of future earthquakes using the inverse solution of interseismic data (in Persian), Torkanloo E, Khaji N, 9th National Congress on Civil Engineering, 2016, Without Invitation, other, Mashhad, Iran
  24. Seismic hazard analysis of Sanandaj city using a probabilistic approach (in Persian), Khaji N, Yazdani M, 3rd International Congress on Civil Engineering, Architecture, and Urban development, 2015, Without Invitation, other, Tehran, Iran
  25. Application of discrete element method for modeling nonlinear behavior of masonry materials, Maddahi M, Khaji N, International Conference on New Researches in Civil, Architectural and Urban Engineering, 2015, Without Invitation, other, Tehran, Iran
  26. A comparison between singular values decomposition and spectral decomposition methods for solving inverse problems of fault movements prediction (in Persian), Torkanloo E, Khaji N, 2nd Conference on Seismology and Earthquake Engineering of Alborz Province, 2015, Without Invitation, other, Karaj, Iran
  27. Dynamic analysis of dam-foundation interaction using the decoupled equations method (in Persian), Ghazanfari-Tehran A, Khaji N, 7th International Conference on Seismology and Earthquake Engineering, 2015, Without Invitation, other, Tehran, Iran
  28. Critical excitation for input seismic energy (in Persian), Bazrafshan A, Khaji N, 7th International Conference on Seismology and Earthquake Engineering, 2015, Without Invitation, other, Tehran, Iran
  29. A stochastic-spectral finite element method for analysis of elasto-dynamic problems, Zakian P, Khaji N, 7th International Conference on Seismology and Earthquake Engineering, 2015, Without Invitation, English, Tehran, Iran
  30. A stochastic-spectral finite element applied to the analysis of stochastic structural mechanics problems, Zakian P, Khaji N, 10th International Congress on Civil Engineering, 2015, Without Invitation, English, Tabriz, Iran
  31. Vibration based damage identification of masonry structures, Maddahi N, Khaji N, 10th International Congress on Civil Engineering, 2015, Without Invitation, English, Tabriz, Iran
  32. Determination of unknown boundary conditions of cracked beams using a stationary concentrated mass (in Persian), Mohtasebi SM, Khaji N, 10th International Congress on Civil Engineering, 2015, Without Invitation, other, Tabriz, Iran
  33. Development of decoupled equations method to calculate stress intensity factors in 2D problems, Yazdani M, Khaji N, 10th International Congress on Civil Engineering, 2015, Without Invitation, English, Tabriz, Iran
  34. Vibration-based health monitoring of masonry structures using artificial neural networks (in Persian), Maddahi N, Khaji N, 6th Conference on National Building Regulations, 2014, Without Invitation, other, Shiraz, Iran
  35. Numerical simulation of faults for calculation of Greens function operator matrix using the split node technique (in Persian), Mirashrafi SR, Khaji N, 8th National Congress on Civil Engineering, 2014, Without Invitation, other, Babol, Iran
  36. Development of decoupled equations method for solving the Helmholtz equation by direct application of boundary conditions (in Persian), Babaee R, Khaji N, Mirzajani M, 8th National Congress on Civil Engineering, 2014, Without Invitation, other, Babol, Iran
  37. Development and application of decoupled equations method for analysis of wave diffraction around vertical cylinders of circular cross-section (in Persian), Moghadaszadeh SO, Khaji N, 12th Iranian Hydraulics Conference, 2013, Without Invitation, other, Tehran, Iran
  38. Current numerical methods for modeling seismic waves propagation (in Persian), Khaji N, 7th National Congress on Civil Engineering, 2013, With Invitation, other, Zahedan, Iran
  39. A new diagonal dynamic stiffness matrix for analysis of an unbounded medium in the frequency domain (in Persian), Mirzajani M, Khaji N, Khodakarami MI, 7th National Congress on Civil Engineering, 2013, Without Invitation, other, Zahedan, Iran
  40. Development of decoupled equations method for solving 2D elastodynamic problems with support excitation in the frequency domain (in Persian), Babaee R, Khaji N, 3rd International Conference on Acoustic and Vibration, 2013, Without Invitation, other, Tehran, Iran
  41. Parameter estimation in hysteretic systems using the least-squares based estimation methods (in Persian), Peimani M, Yazdanpanah MJ, Khaji N, 21st Iranian Conference on Electrical Engineering, 2013, Without Invitation, other, Mashad, Iran
  42. Inverse Multiquadric (IMQ) function as radial basis function for plane dynamic analysis using dual reciprocity boundary element method, Hamzehei Javaran S, Khaji N, 15th World Conference of Earthquake Engineering, 2012, Without Invitation, English, Lisbon, Portugal
  43. An adaptive physics-based method for the solution of wave motion problem in two dimensions, Shafiei M, Khaji N, 15th World Conference of Earthquake Engineering, 2012, Without Invitation, English, Lisbon, Portugal
  44. A linear sampling method for inverse scattering elastodynamics problems in the time domain, Dehghan Manshadi SH, Khaji N, 15th World Conference of Earthquake Engineering, 2012, Without Invitation, English, Lisbon, Portugal
  45. Site response analysis of wave propagation in half-planes with topography irregularities based on a novel semi-analytical simulation approach, Khodakarami MI, Khaji N, 15th World Conference of Earthquake Engineering, 2012, Without Invitation, English, Lisbon, Portugal
  46. Application of scaled boundary finite element method in the study of topographic effects on seismic waves (in Persian), Mousivand H, Khaji N, 9th International Congress on Civil Engineering, 2012, Without Invitation, other, Isfahan, Iran
  47. A novel three-dimensional semi-analytical method with diagonal coefficient matrices for potential problems, Khodakarami MI, Khaji N, 9th International Congress on Civil Engineering, 2012, Without Invitation, English, Isfahan, Iran
  48. Boundary conditions identification of beam-like structural elements using a test mass, Fekrazadeh S, Khaji N, 9th International Congress on Civil Engineering, 2012, Without Invitation, English, Isfahan, Iran
  49. An adaptive physics-based method for solution of wave motion problem in one dimension, Shafiei M, Khaji N, 9th International Congress on Civil Engineering, 2012, Without Invitation, English, Isfahan, Iran
  50. Identification of unknown boundary conditions for steel cracked deep beam using a concentrated mass in an arbitrary location (in Persian), Fekrazadeh S, Khaji N, 2nd National Conference of Steel and Structure, 2011, Without Invitation, other, Tehran, Iran
  51. Studies in seismic wave propagation in Iran, Khaji N, 8th UNESCO Workshop on Reduction of Earthquake Losses in South-Asia Region, 2011, With Invitation, English, Tehran, Iran
  52. A novel semi-analytical method with diagonal coefficient matrices for the analysis of elastostatic problems, Khodakarami MI, Khaji N, International Conference on Boundary Element and Meshless Techniques XII, 2011, Without Invitation, English, Brasilia, Brazil
  53. Simulation of strong ground motion in northern Iran using specific barriers model (in Persian), Soghrat MR, Khaji N, Zafarani H, 6th International Conference on Seismology and Earthquake Engineering, 2011, Without Invitation, other, Tehran, Iran
  54. Accurate boundary conditions for finite element modeling of movement field within Iran tectonic plate, Hamidi M, Khaji N, 6th International Conference on Seismology and Earthquake Engineering, 2011, Without Invitation, English, Tehran, Iran
  55. Stiffness matrix of a new cracked beam finite element using the conjugated beam method and Betti's law, Mehrjoo M, Khaji N, 6th International Conference on Seismology and Earthquake Engineering, 2011, Without Invitation, English, Tehran, Iran
  56. Application of spectral finite element method in analysis of transient elastodynamic problems, Kazemi Noureini H, Khaji N, 6th National Congress on Civil Engineering, 2011, Without Invitation, English, Semnan, Iran
  57. An analytical method for crack detection of a simply supported deep beam using a test mass (in Persian), Fekrazadeh S, Khaji N, Shafiei M, 6th National Congress on Civil Engineering, 2011, Without Invitation, other, Semnan, Iran
  58. A study on site effects in northern Iran using empirical H/V method (in Persian), Soghrat MR, Khaji N, Zafarani H, 6th National Congress on Civil Engineering, 2011, Without Invitation, other, Semnan, Iran
  59. Application of Cellular Automata method for solving in-plane elastic wave propagation problem (in Persian), Shafiei M, Khaji N, 6th National Congress on Civil Engineering, 2011, Without Invitation, other, Semnan, Iran
  60. Analytical evaluation of natural frequencies for steel cracked deep beam using a concentrated mass in an arbitrary location (in Persian), Fekrazadeh S, Khaji N, Shafiei M, 1st National Conference of Steel and Structure, 2010, Without Invitation, other, Tehran, Iran
  61. A new method for optimization of concrete gravity dams considering dynamic fluid-structure interaction (in Persian), Pedroud K, Khaji N, 9th Iranian Hydraulics Conference, 2010, Without Invitation, other, Tehran, Iran
  62. Seismic analysis of baffled liquid storage tanks using the boundary element method (in Persian), Arab MH, Khaji N, 9th Iranian Hydraulics Conference, 2010, Without Invitation, other, Tehran, Iran
  63. Analytical solutions for free and forced vibrations of a cracked cantilever deep beam subjected to a concentrated moving load (in Persian), Shafiee M, Khaji N, 5th National Congress on Civil Engineering, 2010, Without Invitation, other, Mashhad, Iran
  64. Analysis of topographical effects on seismic waves using the boundary element method and Neumann series expansion (in Persian), Amini M, Khaji N, 5th National Congress on Civil Engineering, 2010, Without Invitation, other, Mashhad, Iran
  65. Application of higher-order elements in scaled boundary finite element method (SBFEM) to improve its accuracy and efficiency, Khodakarami MI, Khaji N, 5th National Congress on Civil Engineering, 2010, Without Invitation, English, Mashhad, Iran
  66. System identification of concrete gravity dams using artificial neural networks, Karimi I, Khaji N, 2nd International Conference of Long Term Behavior of Dams, 2009, Without Invitation, English, Graz, Austria
  67. An analytical solution for the problem of crack detection of cantilever deep beam (in Persian), Shafiei M, Khaji N, 8th International Congress on Civil Engineering, 2009, Without Invitation, other, Shiraz, Iran
  68. Effects of far-field boundary on hydrodynamic pressure distribution on concrete gravity dams (in Persian), Mirzayee M, Khaji N, 8th International Congress on Civil Engineering, 2009, Without Invitation, other, Shiraz, Iran
  69. Soil-structure interaction analysis using a hybrid spectral element-finite element method (in Persian), Mirhashemian P, Khaji N, 8th International Congress on Civil Engineering, 2009, Without Invitation, other, Shiraz, Iran
  70. Application of Legendre and Chebyshev spectral elements for solving impact wave propagation problems in elastic domains (in Persian), Jalalpour M, Hamzeh Javaran S, Khaji N, 8th International Congress on Civil Engineering, 2009, Without Invitation, other, Shiraz, Iran
  71. Structural identification of mass, stiffness and damping matrices using the results of forced vibration tests (in Persian), Khanmirza E, Khaji N, 4th National Congress on Civil Engineering, 2008, Without Invitation, other, Tehran, Iran
  72. A study on the effects of seismic isolators on liquid storage tanks (in Persian), Shekari MR, Khaji N, 4th National Congress on Civil Engineering, 2008, Without Invitation, other, Tehran, Iran
  73. An analytical solution for free vibration analysis of cracked Timoshenko beam (in Persian), Jalalpour M, Khaji N, 4th National Congress on Civil Engineering, 2008, Without Invitation, other, Tehran, Iran
  74. Application of hard- and soft-computing techniques in structural identification (in Persian), Jalalpour M, Khaji N, 4th National Congress on Civil Engineering, 2008, Without Invitation, other, Tehran, Iran
  75. Rehabilitation of masonry arch bridges using anchorage reinforcement (in Persian), Khaji N, Ahmadvand Sh, 3rd National Congress on Civil Engineering, 2007, Without Invitation, other, Tabriz, Iran
  76. Application of artificial neural networks for determination of cracking severity of cantilevered beams (in Persian), Khaji N, Joharzadeh M, 3rd National Congress on Civil Engineering, 2007, Without Invitation, other, Tabriz, Iran
  77. Numerical calculation of Greens function operator matrix, a case study of Tehran north fault (in Persian), Khaji N, Bahrany AH, 5th International Conference of Seismology and Earthquake Engineering, 2007, Without Invitation, other, Tehran, Iran
  78. Application of spectral finite element method for solving wave propagation problems in continuous elastic domains (in Persian), Khaji N, Habibi M, 5th International Conference of Seismology and Earthquake Engineering, 2007, Without Invitation, other, Tehran, Iran
  79. Damage detection of truss bridges joints from static data using artificial neural networks (in Persian), Khaji N, Mehrjoo M, 3rd National Congress on Civil Engineering, 2007, Without Invitation, other, Tabriz, Iran
  80. Damage detection of bridge structures from dynamic responses using neural networks (in Persian), Khaji N, Mehrjoo M, 5th International Conference of Seismology and Earthquake Engineering, 2007, Without Invitation, other, Tehran, Iran
  81. FE-BE modeling of a spherical submersible body (in Persian), Khaji N, Shafieefar M, Hafizi R, 7th International Congress on Civil Engineering, 2006, Without Invitation, other, Tehran, Iran
  82. Inverse methods for structural damage detection (in Persian), Khaji N, Mehrjoo M, 7th International Congress on Civil Engineering, 2006, Without Invitation, other, Tehran, Iran
  83. A singular value decomposition method for the identification of dynamic properties of structures (in Persian), Choupani K, Khaji N, 1st National Congress on Civil Engineering, 2004, Without Invitation, other, Tehran, Iran
  84. On the location determining of coming Tokai earthquake, Central Japan, Khaji N, 4th International Conference of Seismology and Earthquake Engineering, 2003, Without Invitation, English, Tehran, Iran

Social Activities

History as Committee Members

  1. Editor-in-Chief, 2022/07, 2025/12, Journal of Earthquake and Tsunami (World Scientific Publishing Company c/o Juritsusha)

Other Social Contributions

  1. Civil Engineering in the Face of Catastrophic Phenomena due to Climate Change, Seismic vulnerability mitigation strategies for buildings in urban areas: a case study of Tehran, Iran, University of Guanajuato, 75th Anniversary of Civil Engineering Bachelor Program, 2022/11/16, 2022/11/19, University of Guanajuato, Mexico, Seminar or workshop, Researchesrs
  2. Structural Analysis I, Moving Loads (Influence Lines), Galala University, 2022/01/01, 2022/01/30, Egypt (Online), Lecturer, Lecture, College students